2. Zebra
  3. EYSNSNZWWZ1

Zebra EYSNSNZWWZ1 User manual

  • Hello! I've reviewed the user manual for the Zebra printer module EYSNSNZWWZ1. This document covers compliance statements, radio frequency exposure guidelines, and installation instructions. It also details test modes available. I'm ready to answer any specific questions you might have about the device or the instructions provided in this manual.
  • What is the FCC ID of this device?
    Can this module be installed by end users?
    What should be the minimum distance between the radiator and user body?
    What type of antenna is used?
UserManual
EYSNSNZWWZ1
ComplianceandRegulatoryStatements
FCCComplianceStatement(USA)
ThisdevicecomplieswithPart15.247.Operationissubjecttothefollowingtwoconditions:
1. Thisdevicemaynotcauseharmfulinterference.
2. Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause
undesiredoperation.
ThisequipmenthasbeentestedandfoundtocomplywithClassBDigitalDevices,pursuanttoPart15of
theFCCrules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterference
whentheequipmentisoperatedinaresidentialenvironment.Thisequipmentgenerates,uses,andcan
radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeproductmanuals,
maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethat
interferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterference
toradioortelevisionreception,theuserisencouragedtoemployoneormoreofthefollowing
measures:
Reorientorrelocatethereceivingantenna
Increasetheseparationbetweentheequipmentandreceiver
Connecttheequipmenttoanoutletonacircuitdifferentfromthattowhichthereceiveris
connected
ConsultthedealeroranexperiencedRFservicetechnicianforhelp
Theendproductmustbelabeled,inavisiblearea,withthefollowing:
ContainsFCCID:I28‐EYSNSNZWWZ1
ModificationWarning
TheuseriscautionedthatanychangesormodificationsnotexpresslyapprovedbyZebraTechnologies
couldvoidtheuser’sauthoritytooperatetheequipment.Toensurecompliance,thisprintermustbe
usedwithfullyshieldedcommunicationcables.
RFExposureStatement
ThistransmittercomplieswithFCCradiationexposurelimitssetforthforanuncontrolledenvironment.
Thistransmittermustnotbeco‐locatedoroperatinginconjunctionwithanyotherantennaor
transmitter,exceptinaccordancewithFCCmulti‐transmitterproductprocedures.
CanadianDOCComplianceStatement
CetappareilnumeriquedelaclasseBestconformealanormeNMB‐003duCanada.ThisClassBdigital
apparatuscomplieswithCanadianICES‐003.
Innovation,Science,andEconomicDevelopmentCanada(ISED)Warning
LepresentappareilestconformeauxCNRdIndustrieCanadaapplicablesauxappareilsradioexemptsde
licence.Lexploitationestautoriseeauxdeuxconditionssuivantes:(1)appareilnedoitpasproduirede
brouillage,et(2)Iutilisateurdelappareildoitacceptertoutbrouillageradioelectriquesubi,memesile
brouillageestsusceptiblencompromettrelefonctionnement.
Énoncéd'expositionauxrayonnements:Cetéquipementestconformeauxlimitesd'expositionaux
rayonnementsioniquesRSS‐102Pourunenvironnementincontrôlé.Cetéquipementdoitêtreinstalléet
utiliséavecunDistanceminimalede20cmentreleradiateuretvotrecorps.
ThisdevicecomplieswithIndustryCanadalicense‐exemptRSSstandard(s).Operationissubjecttothe
followingtwoconditions:(1)Thisdevicemaynotcauseinterference.,(2)Thisdevicemustacceptany
interference,includinginterferencethatmaycauseundesiredoperationofthedevice.
ISEDCRadiationExposureStatement
ThisequipmentcomplieswiththeICRSS‐102radiationexposurelimitssetforthforanuncontrolled
environment.Thisequipmentshouldbeinstalledandoperatedwithaminimumdistanceof20cm
betweentheradiatoranduserbody.
Cetéquipementestconformeauxlimitesd'expositionauxrayonnementsioniquesRSS‐102Pourun
environnementincontrôlé.CetéquipementdoitêtreinstalléetutiliséavecunDistanceminimalede20
cmentreleradiateuretvotrecorps.
Theendproductmustbelabeled,inavisiblearea,withthefollowing:
ContainsIC:3798B‐EYSNSNZWWZ1
ApprovedAntennaInformation
Onlytheintegratedantennaonthemoduleisallowedandcannotbeuserreplaceable.
Antennatype:
PCB:Gain:‐4dBi(2.4GHz)
Partnumber:nRF52811
Recommendedmountingexampleformoduleandantenna:
Note:awideGNDareamustbeprovidedtoensureisolationforeachlayer
General
TheEYSNSNZWWZ1modulehasbeencertifiedasaFullModulardevice,andisnotaLimitedModule.
Additionalevaluationisrequiredforuseinallhostdevices.
Maximumratingsandoperationalconditions:
Thefollowingdescribestheinstallationproceduresforthevarioushostsinwhichthemodulehasbeen
evaluated.
InstallationInstructionsforZebraPrinters
TheEYSNSNZWWZ1moduleisnotintendedforOEMintegrationsorendusers.Itcanonlybeinstalledin
theZebraprintersatthegranteemanufacturingfacility.
TestModesandTestingRequirements
Thistransmitteristobetestedwhileinstalledintoahostdevice.Theoperationaltestmodesareas
follows:
Normalconnectionmodepairedwithaseparatemasterdevice
Continuouswavetransmissionmode:Channels0‐39selectable,outputpowerselectable,
modulatedandunmodulatedtransmissionselectable.Exampletestcommandstohostdevice
arelistedbelow
<*ToputprinterintoFCCtestmode,highlightthebelow3lines,andpressSHIFT‐F5*>
!U1SETVAR"wlan.test.sar.mode""on"<CR><LF>
!U1SETVAR"bluetooth.test_mode""on"<CR><LF>
!U1SETVAR"device.reset"""<CR><LF>
<*Afterprinterdeviceresets,highlightthebelow4lines,andpressSHIFT‐F5*>
<*ChangeTBLExxxxtoanyofthebelowExamples*>
!U1SETVAR"wlan.test.sar.tx_stop"""<CR><LF>
!U1SETVAR"device.friendly_name""TEST2000"<CR><LF>
!U1SETVAR"wlan.test.sar.tx_start"""<CR><LF>
!U1SETVAR"device.reset"""<CR><LF>
<*Aftertestingiscompleted,highlightthebelow3lines,andpressSHIFT‐F5*>
!U1SETVAR"wlan.test.sar.mode""off"<CR><LF>
!U1SETVAR"bluetooth.test_mode""off"<CR><LF>
!U1SETVAR"device.reset"""<CR><LF>
/