Rockboard Mini Mounting MOD TRS Patchbay User manual

Mini Mounting MOD TRS Patchbay
Brand
Rockboard
Model
Mini Mounting MOD TRS Patchbay
Type
User manual

Rockboard Mini Mounting MOD TRS Patchbay is a versatile and convenient solution for integrating power and signal connections into your pedalboard. It fits perfectly into the RockBoard® LED Light mounting holes, providing easy access to the signal supply of pedals on the board. The central TRS 6.3 mm stereo jack socket allows for flexible signal routing, including send/return applications and connecting external pedals like Wah. With its through-connections between inner and outer jacks, the Mini Mounting MOD TRS also enables reverse signal flow to external pedals.

Rockboard Mini Mounting MOD TRS Patchbay is a versatile and convenient solution for integrating power and signal connections into your pedalboard. It fits perfectly into the RockBoard® LED Light mounting holes, providing easy access to the signal supply of pedals on the board. The central TRS 6.3 mm stereo jack socket allows for flexible signal routing, including send/return applications and connecting external pedals like Wah. With its through-connections between inner and outer jacks, the Mini Mounting MOD TRS also enables reverse signal flow to external pedals.

USA DISTRIBUTION: Framus & Warwick Music USA, Inc. | info@rockboard.net | 629.202.6790
CHINESE DISTRIBUTION: Warwick Music Equipment Trading (Shanghai) Co. Ltd. | [email protected] | +862134060110
NORTH EUROPEAN DISTRIBUTION: www.rockboard.de | info@rockboard.de | www.w-distribution.de | www.facebook.com/warwickmusicdistribution
Headquarters: Warwick GmbH & Co. Music Equipment KG | 08258 Markneukirchen / Germany | +49 (0) 37422 / 555 - 0
Family Owned • Solar Powered • Sustainably Manufactured in a Green Environment
Note: The manufacturer reserves the right to change these specications without notice.
Thank you for choosing the RockBoard® Mini Mounting MOD TRS.
The Mini Mounting MOD TRS provides convenient access to the
signal supply of the pedals on the board. It fits perfectly into
the RockBoard® LED Light mounting holes and is a versatile,
clean mounting solution on all RockBoard® series pedalboards.
Central access to the signal supply is provided by a TRS 6.3 mm
stereo jack socket.
Step 1
Turn the RockBoard® pedalboard
upside down.
Insert the RockBoard® Mini Mounting MOD TRS into the large hole
of the RockBoard® LED-Light and align the two threaded bushings
with the mounting holes of the RockBoard® LED-Light.
Step 2
Step 4
Connect the input of the rst
pedal to the inside jack A of the
RockBoard® Mini Mounting
MOD TRS by using a patch cable.
Step 3
Use the included screws to hand-
tighten the RockBoard® Mini
Mounting MOD DC.
Connect an instrument cable to
the outside TRS connector.
Step 5
Since the Mini Mounting MOD TRS uses through-connections between the inner and outer jacks, it is also possible to pass signals in the reverse
direction to external pedals, such as Wah. Also, by using TRS stereo jacks, „send/return“ applications (A- = tip and B- = ring) are easy to realize.
Mounting
Additional applications
MONO A MONO
A
TO MULTI DC
OFF BOARD
PEDAL
B
MONO A
STEREO
(RockCable Art.No. 0815/007)
SEND
RETURN
MONO B
ROCKBOARD MiniMod® WIRING DIAGRAM
A
PEDAL
PEDAL
AC/DC ADAPTER
B
A B
A B
SCHMIDT.LACKNER.DESIGN
July 14, 2022
MONO A MONO
A
TO MULTI DC
OFF BOARD
PEDAL
B
MONO A
STEREO
(RockCable Art.No. 0815/007)
SEND
RETURN
MONO B
ROCKBOARD MiniMod® WIRING DIAGRAM
A
PEDAL
PEDAL
AC/DC ADAPTER
B
A B
A B
SCHMIDT.LACKNER.DESIGN
July 14, 2022
MONOMONO A
MONO A
SEND
MONO B (Rockcable Art.No.
RCL 20921/20922/20923/20924/20925 D4)
RETURN
STEREO
A AB B
Installation Manual for
RockBoard® Mini Mounting MOD TRS
TRS mounting solution for RockBoard® pedalboards
English
  • Page 1 1

Rockboard Mini Mounting MOD TRS Patchbay User manual

Mini Mounting MOD TRS Patchbay
Brand
Rockboard
Model
Mini Mounting MOD TRS Patchbay
Type
User manual

Rockboard Mini Mounting MOD TRS Patchbay is a versatile and convenient solution for integrating power and signal connections into your pedalboard. It fits perfectly into the RockBoard® LED Light mounting holes, providing easy access to the signal supply of pedals on the board. The central TRS 6.3 mm stereo jack socket allows for flexible signal routing, including send/return applications and connecting external pedals like Wah. With its through-connections between inner and outer jacks, the Mini Mounting MOD TRS also enables reverse signal flow to external pedals.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents