Page is loading ...
USA DISTRIBUTION: Framus & Warwick Music USA, Inc. | info@rockboard.net | 629.202.6790
CHINESE DISTRIBUTION: Warwick Music Equipment Trading (Shanghai) Co. Ltd. | [email protected] | +862134060110
NORTH EUROPEAN DISTRIBUTION: www.rockboard.de | info@rockboard.de | www.w-distribution.de | www.facebook.com/warwickmusicdistribution
Headquarters: Warwick GmbH & Co. Music Equipment KG | 08258 Markneukirchen / Germany | +49 (0) 37422 / 555 - 0
Family Owned • Solar Powered • Sustainably Manufactured in a Green Environment
Note: The manufacturer reserves the right to change these specications without notice.
Thank you for choosing a RockBoard® Base Plate. This Base Plate is an optional base plate and a versatile, clean mounting solution for the
RockBoard® pedalboards. Thanks to the practical twist locks, the Base Plate can be conveniently and easily mounted under the pedalboard
quickly with no additional drill holes required. The Base Plate can be opened and xed again with the six twist locks at any time without
requiring any tools.
Step 1
Turn the RockBoard® pedalboard upside down.
Remove all 6 feet and individual nuts with included allen key.
Do not throw away.
Step 2
Reattach all 6 rubber feet to your RockBoard® pedalboard using
the wrench and the Allen key and then turn the fasteners outward,
as shown.
Mount one twist lock on each of the rubber feet in the order shown.
Place the RockBoard® Base Plate in the corresponding openings
of the rubber feet. Then rotate the latches inward to securely lock
the Base Plate into place.
Your RockBoard® is now ready to use! The Base Plate can be opened
and closed at any time by simply turning the latches.
Mounting
Step 5
Step 3 Step 4
Step 6
Installation Manual for
RockBoard® Base Plate
Base plate for RockBoard® pedalboards
English
/
