HIDBEA VC-TJ32-60200-65 User manual

Use and Care Manual

To apply this adhesive privacy window film successfully, please

follow tips below:

1. Thoroughly clean the windows. 

2. Remove the backing protective film from the green label.

3. When you squeegee out all bubbles, please use the cloth as a cushion between

the squeegee and the film to avoid making scratches.

4. Application is easier with two people, especially on larger windows (3-4 feet

wide).

5. Apply film to cool shaded windows when glass temperature is between 45-90℉.

For best results, do not apply in direct sunlight or freezing weather.

6. The best time for installing is early morning or evening when the glass is cooler.

7. Cut the film to a size of 2-3mm from the window frame, pick up a corner at the

edge, re-spray and paste, and scrape the bubble.

IMPORTANCE:

1. Do not apply any film to frosted, treated, etched, stained glass, or any otherwise

flawed or defective glass.

2. Do not apply the film to motor vehicle windows.

3. Handle the film carefully while installing to avoid wrinkles or creases, which can't

be removed.

4. Make sure you have removed the transparent backing film and paste the smooth

side to the window, or it will not cling.

5. Do not affix tapes, suction cups, stickers, etc. to the film surface. Doing so will

reduce the low impassivity properties of the film and will void your product

warranty.

This manual is also suitable for

Download PDF