2. ENS
  3. TAB20121
TAB20121

ENS TAB20121 Installation guide

  • Hello! I've reviewed the Quick Installation Guide for the FlexiPole Plus Tablet Mount models TAB20121 and TAB40121. This guide details how to install the mount using either screws or adhesive, manage cable routing, and secure your tablet. I'm ready to answer any questions regarding mounting setup, features or specifications.
  • What tools are required for installation?
    What are the cable routing options?
    How do I fit the back cover?
    How to fix the VESA backplate?
2021 ENS Group
Revision A
BACKPLATE
RELEASE
TAB
SHOWN WITHOUT
ACCESS COVER
CENTER CABLE
ROUTING
CUSTOMER
REAR CABLE ROUTING
FlexiPole Plus (Quick Release) Tablet Mount
Quick Installation Guide - TAB20121 + TAB40121
5 min
TOOLS PARTS Note
For screw mount –use stand as a
template. Drill/screwdriver will be
required. Use qualified personnel.
1
1X
2
1) Phillips screwdriver
2) Drill if mounting to
surface with screws
Use qualified personnel
Note
No drill required if using adhesive
pad provided.
1X
1X
Top View
3X Mounting holes
Use appropriate #8
flat head screws for
the surface being
mounted to
3
FlexiPole Plus (Quick Release) Tablet Mount
Quick Installation Guide - TAB20121 + TAB40121
Drill hole to route
Cable thru counter
40mm diameter max
Cable routing option 1 Cable routing option 2
Pivot Tension
Adjustment Dial
Important Note
To fit back cover first engage lower
clips, second engage top clips.
1
2
FlexiPole Plus (Quick Release) Tablet Mount
Quick Installation Guide - TAB20121 + TAB40121
2021 ENS Group
VESA Backplate
(screw or adhesive mounting options)
Compatible Device
FlexiPole Plus (Quick Release) Tablet Mount
Quick Installation Guide - TAB20121 + TAB40121
3
2 min
TOOLS PARTS
2
1
Step 2
If fitting with screws use screwdriver to hand
tighten.
(M4 screws supplied. For other sizes refer to
display manufacturer handbook)
1 x VESA
Backplate (with
VHB adhesive
pad)
4 x M4x8mm
screws
Step 1
Align holes of VESA
backplate with
corresponding mounting
holes of device.
Or fix to device at desired
orientation with VHB pad
PZ
OPTIONAL
SAFEBASE OPTION
To lock device, turn key
clockwise then remove key.
To unlock, turn counter-
clockwise.
To remove device
Step 3
Fit device onto stand.
Press firmly until click.
/