2. Archelon
  3. EXO

Archelon EXO User manual

  • Hello! I am an AI chatbot trained to assist you with the Archelon EXO User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Assembly Instructions
for Archelon v1.2
Additional items you may need to assemble your Archelon (not provided):
a) Tape – Scotch or Other optional for use with a charging cable
b) Drill
c) ¾” drill bit
d) ¼” drill bit
(8) Security Screws(8) Security Screws
Lag Bolt
Lag Bolt
Machined Bolt
Machined Bolt
Nut & Lock Washer
Nut & Lock Washer
Bolt Cap
Bolt Cap
Mounting Thimble
Mounting Thimble
Home Button Cover “F”
Home Button Cover “F”
Cord Management Adapter “E”
Cord Management Adapter “E”
Cord Management Adapter “D”
Cord Management Adapter “D”
Power “A”
Power “A” Audio “B”Audio “B” Volume “C”Volume “C”
Pan WasherPan Washer
Security Driver
Security Driver
1) Open
enclosure
parts and tool
assembly
package. The
package will
include…
1) Open
enclosure
parts and tool
assembly
package. The
package will
include…
Plug CoversPlug Covers
Home ButtonHome Button
Home Button Opening
Home Button Opening
Home Button Cover
Home Button Cover
Home Button Cover in PlaceHome Button Cover in Place
2) Lay the faceplate on a smooth, no-slip surface ensuring the home
button opening is at the bottom.
2) Lay the faceplate on a smooth, no-slip surface ensuring the home
button opening is at the bottom.
3) If you are covering the home button, make sure the home button
cover (F) is in the home button opening on the front of the Archelon.
3) If you are covering the home button, make sure the home button
cover (F) is in the home button opening on the front of the Archelon.
4) Carefully place the iPad®, face down, onto the faceplate making sure
the Apple logo is as shown, continue onto step 5 if not using the
iDynamo Adapter Kit (optional).
4) Carefully place the iPad®, face down, onto the faceplate making sure
the Apple logo is as shown, continue onto step 5 if not using the
iDynamo Adapter Kit (optional).
Magtek iDynamo Adapter Kit includes…Magtek iDynamo Adapter Kit includes…
2) Carefully place the iPad®, face down, onto the faceplate making sure
the Apple logo is as shown and insert iDynamo Card
Reader as shown.
2) Carefully place the iPad®, face down, onto the faceplate making sure
the Apple logo is as shown and insert iDynamo Card
Reader as shown.
3) Place Magtek iDynamo Adapter over Card Reader
3) Place Magtek iDynamo Adapter over Card Reader
Instrucons for Oponal Archelon 1.2
Swipe P.O.S. 30-Pin kit for iDynamo
iDynamo Card Reader not includediDynamo Card Reader not included
iDynamo USB cordiDynamo USB cord
iDynamo Card Reader not includediDynamo Card Reader not included
iDynamo AdapteriDynamo Adapter
iDynamo AdapteriDynamo Adapter
7) OPTIONAL ADAPTER “E” ONLY: Pull power cord through the opening
in Adapter “E” and plug power cord into the iPad®. Place Adapter “E”
into its spot on the Archelon making sure the square key is facing up.
Note: You may need to slightly lift the iPad® to t the adapter securely.
7) OPTIONAL ADAPTER “E” ONLY: Pull power cord through the opening
in Adapter “E” and plug power cord into the iPad®. Place Adapter “E”
into its spot on the Archelon making sure the square key is facing up.
Note: You may need to slightly lift the iPad® to t the adapter securely.
4) Adapter Installed over Card Reader. Continue to Step 8 to complete
installation
4) Adapter Installed over Card Reader. Continue to Step 8 to complete
installation
Square KeySquare Key
5) Decide if you would like to be able to remove out the charging cord
while the iPad® is in your Archelon. If you would like access to pull out
the cord, use adapter “D” . If you would like the cord to be secure and
unable to pull out while the iPad® is in your Archelon, use adapter “E” .
5) Decide if you would like to be able to remove out the charging cord
while the iPad® is in your Archelon. If you would like access to pull out
the cord, use adapter “D” . If you would like the cord to be secure and
unable to pull out while the iPad® is in your Archelon, use adapter “E” .
6) OPTIONAL ADAPTER “D” ONLY: Insert adapter making sure the
square key is facing up. Route power cable through the Archelon as
shown.
6) OPTIONAL ADAPTER “D” ONLY: Insert adapter making sure the
square key is facing up. Route power cable through the Archelon as
shown.
Square KeySquare Key
Power “A”Power “A” Audio “B”Audio “B” Volume ”C”Volume ”C”
8) OPTIONAL PORT PLUGS (A, B & C) Decide what ports you would like
to keep open and what ports you would like to close. If you want
access to all ports, put aside pieces A, B & C).
8) OPTIONAL PORT PLUGS (A, B & C) Decide what ports you would like
to keep open and what ports you would like to close. If you want
access to all ports, put aside pieces A, B & C).
PowerPower
Volume
Volume
Audio
Audio
9) If you are using the port plugs, insert plugs into their intended holes
as shown. If you are using plug A, make sure to change the setting on
your iPad® to continuously be on. Once install is complete, you will not
be able to access the power button to turn the iPad® on or o without
having to disassemble the frame.
9) If you are using the port plugs, insert plugs into their intended holes
as shown. If you are using plug A, make sure to change the setting on
your iPad® to continuously be on. Once install is complete, you will not
be able to access the power button to turn the iPad® on or o without
having to disassemble the frame.
11) Carefully fasten the Archelon backplate to the faceplate using the
supplied security screws. Note: Hand tighten in the order shown in the
inset photo.
11) Carefully fasten the Archelon backplate to the faceplate using the
supplied security screws. Note: Hand tighten in the order shown in the
inset photo.
1
2
3
4
5
6
7
8
Note How Cable ts in NotchesNote How Cable ts in Notches
Bottom
Bottom
Top
Top
10) Cable Routing : Route power cable through the back plate as
shown in RED. Carefully place backplate with power cord* onto
faceplate as shown in step 11.
10) Cable Routing : Route power cable through the back plate as
shown in RED. Carefully place backplate with power cord* onto
faceplate as shown in step 11.
Magtek LayoutMagtek Layout
Note the Amount of
Slack in the Cord
Note the Amount of
Slack in the Cord
13) Using the supplied mounting template, tape into place where you
would like to mount your Archelon. Make sure there is a 110v power
source if you want to keep your iPad® charged. Keep a minimum of 4”
clear space (away from walls or other obstructions) to allow the
Archelon to operate in its’ full range of motion.
13) Using the supplied mounting template, tape into place where you
would like to mount your Archelon. Make sure there is a 110v power
source if you want to keep your iPad® charged. Keep a minimum of 4”
clear space (away from walls or other obstructions) to allow the
Archelon to operate in its’ full range of motion.
14) Using a ¾” drill bit (for thimble hole only!), drill through the surface.
Using a ¼” drill bit, drill bolt hole. Note: make sure correct drill bit is
used for your specic surface.
15) Insert power cord (USB connector rst) into thimble hole.
15) Insert power cord (USB connector rst) into thimble hole.
12) Weave power cord through cord management system on the
back of the Archelon. Note: If using the optional mounting base please
continue to the supplemental section in green
12) Weave power cord through cord management system on the
back of the Archelon. Note: If using the optional mounting base please
continue to the supplemental section in green
ThimbleThimble
Viewed from
under mounting
surface
Viewed from
under mounting
surface
16) Firmly press the mounting thimble into the base making sure the
slot aligns with the notches as shown. Route power cord as shown and
install into the thimble hole.
16) Firmly press the mounting thimble into the base making sure the
slot aligns with the notches as shown. Route power cord as shown and
install into the thimble hole.
18) Press the bolt cap into place and you’re done!
18) Press the bolt cap into place and you’re done!
Instrucons for Oponal Archelon 1.2
Oponal Mount Kit
17) Install lag bolt (or machined bolt with supplied pan washer, lock
washer and nut) as shown.
17) Install lag bolt (or machined bolt with supplied pan washer, lock
washer and nut) as shown.
Mounting base kit includes…Mounting base kit includes…
Bolt, Washer, Lock Washer & NutBolt, Washer, Lock Washer & Nut
Optional Mount
Optional Mount
Thimble
Thimble
1) Optional mounting base comes w/pre installed VHB double sided
tape.
CAUTION! VHB Tape (SHOWN IN RED) will form a permanent bond
with it’s mating surface. Removal may result in damage to surface!
1) Optional mounting base comes w/pre installed VHB double sided
tape.
CAUTION! VHB Tape (SHOWN IN RED) will form a permanent bond
with it’s mating surface. Removal may result in damage to surface!
Underside Of Optional MountUnderside Of Optional Mount
Bolt Hole
Bolt Hole
Bolt Hole
Bolt Hole
Thimble Hole
Thimble Hole
Thimble Hole
Thimble Hole
Thimble Pressed Into Base
W/usb Cord Routed Thru
Thimble Pressed Into Base
W/usb Cord Routed Thru
3) Insert USB Cable into Thimble Hole3) Insert USB Cable into Thimble Hole
4) Align Archelon onto Optional base thru the correct holes. Route
cable as shown thru the slot.
4) Align Archelon onto Optional base thru the correct holes. Route
cable as shown thru the slot.
2) Firmly press the thimble into base making sure the slot aligns with
the notches as shown. Route power cord as shown and install into the
thimble hole.
2) Firmly press the thimble into base making sure the slot aligns with
the notches as shown. Route power cord as shown and install into the
thimble hole.
Cable Running Thru SlotCable Running Thru Slot
7) You are now ready to place the assembled Archelon onto your
smooth & clean surface! Press the bolt cap into place and you’re done!
7) You are now ready to place the assembled Archelon onto your
smooth & clean surface! Press the bolt cap into place and you’re done!
*The power cord is required to operate the iPad®
continuously. Not using the power cord will required
the iPad® to be recharged as battery life declines.
5) Install machined bolt w/supplied washer, lock washer & nut as
shown.
5) Install machined bolt w/supplied washer, lock washer & nut as
shown.
BOLT HOLEBOLT HOLE
6) With the machined bolt tightened remove the red VHB backing tape
exposing the adhesive.
6) With the machined bolt tightened remove the red VHB backing tape
exposing the adhesive.
/