C
D
Typ 1
Typ 2
O
2
DSL Router Classic
Quick start guide
You will require the following components to set up and configure your O
2
DSL Router Classic. Please note that the O
2
DSL Router Classic
will only work once your telephone line has been activated. Please see your welcome letter for the activation date.
Power supply unit
with power cable
DSL cable 2 adaptors for
phone/fax
Connecting the DSL router to the power supply
1
Connecting the DSL router to the telephone socket
2
Connecting the DSL router to the computer
Overview of the package contents and the necessary installation information
A B C D
Please only use your O
2
DSL Router Classic in conjunction with your O
2
DSL connection.
Setting up and connecting the O
2
DSL Router Classic
Connect the small connector on the DSL cable to the grey DSL connector
on the DSL router. Now insert the other end of the DSL cable into the
telephone outlet, which is labelled with an (F) or a telephone symbol.
The DSL router will now establish a DSL connection. During this time, the
LEDs marked »DSL« and »INTERNET« will flash in succession.
Once the »DSL« LED is permanently illuminated and the »INTERNET« LED
flashes, the DSL router has successfully established the internet connection.
Note: This process may take up to 3 minutes.
The DSL router and computer are connected via LAN (with Ethernet cable).
Connect the Ethernet/LAN cable to one of the yellow Ethernet
connections marked 1– 4 on the DSL router. Connect the second yellow
plug on the cable to the network connection port on your computer.
E
C
Connect the power cable to the DSL router . Then plug the
power supply unit into a power outlet.
Turn the DSL router on using the ON/OFF switch.
Once the blue LED lamp marked »POWER« is continuously illuminated,
the DSL router is ready for use.
Note: This process may take up to 1 minute.
Tip: When setting up the DSL router, please follow the safety notes
in the manual.
B
A
O
2
DSL Starter CD O
2
DSL manualEthernet/LAN
cable
E F G
Welcome letter
(received in advance)
H
Please follow the
instructions in
sequential order!
Tip: You will find English and Turkish versions of the quick start guide as PDF documents
on the O
2
DSL Starter CD in the »Handbücher« folder.
Connecting the phone/fax to the DSL router
3
Please wait until the blue »PHONE 1« and »PHONE 2« LEDs are
permanently illuminated. You can now connect your phone/fax.
Note: This process may take between 3 and 5 minutes.
Your phone/fax is connected directly to the DSL router and not to the
telephone socket.
If your telephone connector cable has a Type 1 plug (see top picture),
connect this plug directly to one of the two DSL router connectors marked
»PHONE 1« or »PHONE 2«.
If your telephone connection cable has a Type 2 plug, please use one of the
adapters supplied as shown in the adjacent picture.
Tip: Connect the phone to the adapter via socket (F); fax via socket (N).
Your phone/fax is now ready to use.
O
2
DSL Router
Classic
1
Power outlet
ON/OFF switch
A
D
RESET
E
CB
Telephone outlet
TAE outlet (F)
Computer
4
Phone/fax (analogue)
1 The O
2
DSL Router Classic only works with an O
2
DSL tariff from O
2
Germany. If you want to use it with a
different DSL provider, the integrated calling function will not be available.
Please turn over
B A
E
D
The O
2
DSL Connection Manager is located on the O
2
DSL Starter CD and
assists you in configuring your network and DSL router.
Preparing for the installation
Switch your computer on and then insert the O
2
DSL Starter CD
into the CD-ROM drive. Please close all open applications before
commencing the installation.
Note: If installation does not start automatically, you can start it manually
by double-clicking on the cdrun.exe program on the CD-ROM.
Tip: Your network can also be configured without the O
2
DSL Connection
Manager. To do this, all the necessary settings must be configured manually
via the user interface of the DSL router (see above – users of other
operating systems).
Software installation and configuration – only Microsoft Windows operating systems
Users of other operating systems such as Mac OS or Linux can configure their network settings directly using the graphical user interface of the DSL router. This can be accessed via a browser at the
following URL: http://192.168.1.1 (password: 1234). The DSL router works with the following browsers: Internet Explorer ® (5.5 or above), Firefox ® (1.4 or above), Netscape ® (7 or above), Opera ® (9.0
or above), Safari ® (1.3.2 or above) or Konqueror ® (3.4.0 or above). Further tips can be found in the O
2
DSL Router user instructions on the O
2
DSL Starter CD.
O
2
wishes you hours of happy surfing and DSL telephoning with O
2
DSL!
Software installation
6
Select the item »DSL Connection Manager installieren« on the welcome screen. Now follow the
instructions given by the installation wizard and confirm each step with »Weiter« or »Fertig stellen«.
Your computer must be restarted after successfully installing the software. When your computer
restarts, it will automatically load the O
2
DSL Connection Manager configuration wizard, which will
guide you step-by-step through setting up your network and DSL router.
Insert O
2
DSL Starter CD
5
F
Errors excepted. We reserve the right to make changes at any time. Revised: April 2008.
Verifying the installation
8
After successfully configuring your network and DSL router, the O
2
DSL
Connection Manager will start automatically.
This program makes it easier for you to manage your DSL router and your
DSL connection. You can directly view and amend the settings of the DSL
router using the O
2
DSL Connection Manager, as well as implementing error
diagnoses.
You can find further information about this in the »DSL Connection
Manager« manual on the O
2
DSL Starter CD .
Completion of quick configuration
Customer support
Our customer support hotline is available to assist you with the setting up
of your O
2
DSL Router Classic and for any other questions you may have
regarding the full functionality of the DSL router.
Contact our hotline:
• Fromalandline:dial+49(0)18 05.
62 43 57 (o2HELP) – for 14 cents per minute
• IfyouhaveanO
2
Germany mobile phone contract, call from the O
2
Germany
mobilephonenetworkon+49(0)179. 55222–freeofcharge.
If our hotline is unable to assist you, we will gladly send a service technician to
your home at your request.
If the DSL router LEDs are illuminated as shown below, your O
2
DSL is ready for use.
If there is more than one Ethernet/LAN connection, the corresponding LEDs also illuminate.
You can now surf the internet and make phone calls with the O
2
DSL.
Note: If the LEDs are not illuminated as shown, please verify each installation step or call
our customer support hotline.
7
F
F
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Technicolor TG789vac V2 Installation guide
-
Asus DSL-AC52U User manual
-
Asus DSL-N17U Owner's manual
-
Westell Technologies Westell UltraLine 7400 User manual
-
ActionTec GT704WR User manual
-
AT&T Call Vantage Telephone Adapter User manual
-
Asus DSL-N10 User manual
-
ActionTec GE344000-01 User manual
-
Netopia Network Adapte User manual
-
Draytek Vigor 2600 VGST Self-Installation Manual
