True Manufacturing TG1FRI-1S Datasheet

True Manufacturing
Brand
True Manufacturing
Model
TG1FRI-1S
Type
Datasheet

True Manufacturing TG1FRI-1S is a roll-in freezer designed to meet the needs of consultants. It features a 300 series stainless steel exterior and interior, with NSF-approved white vinyl coated aluminum sides and back. The digital exterior temperature monitor with manual defogger control allows for quick and easy temperature identification. The door gaskets are removable without tools for ease of cleaning, and the doors are reversible. The heavy-duty hinges and recessed handles provide durability and ease of use.

True Manufacturing TG1FRI-1S is a roll-in freezer designed to meet the needs of consultants. It features a 300 series stainless steel exterior and interior, with NSF-approved white vinyl coated aluminum sides and back. The digital exterior temperature monitor with manual defogger control allows for quick and easy temperature identification. The door gaskets are removable without tools for ease of cleaning, and the doors are reversible. The heavy-duty hinges and recessed handles provide durability and ease of use.

Roll-In Freezer
❒ TG1FRI-1S
5
YEAR
COMPRESSOR
S
A
V
I
N
G
S
E
N
E
R
G
Y
S
Exceptions:
CABINET CONSTRUCTION:
• Exterior - 300 series stainless steel front, shroud, doors & bottom. Anodized
quality aluminum finished ends, top and back.
• Interior - NSF approved white vinyl coated aluminum sides and back. 300
series stainless floor and door liner.
• Digital exterior temperature monitor with manual defogger control, large
LED display for quick and easy temperature identification.
DOORS:
• 300 series stainless steel interior and exterior. Door gaskets of one piece
construction, and removable without tools for ease in cleaning. Doors
are reversible.
• Reinforced, heavy duty stainless steel interior floor.
• Heavy duty hinges. The face of each door fitted with a 12" long recessed
handle with interlock. Handles are foamed-in-place to insure permanent
attachment (lifetime guaranteed).
• Heavy gauge stainless steel ramp standard for each door.
INSULATION:
• Entire cabinet structure and doors insulated using foamed-in-place CFC
free polyurethane foam.
INTERIOR:
• Bumper to prevent cart from damaging interior walls.
LIGHTING:
• Incandescent interior lighting. Light(s) activated by interior, manual
on/off switch.
REFRIGERATION SYSTEM:
• Oversized refrigeration system factory balanced using CFC free R404A
refrigerant.
• Top mounted condensing unit.
• Factory pre-engineered capillary tube system with oversized condenser
and evaporator to reduce product pull down time and to consistently
maintain food safe -10°F interior cabinet temperature.
• Defrost system time initiated, temperature terminated.
• Automatic evaporator fan motor delay during defrost cycle.
• Large evaporator and coil heater permit short defrost cycle.
• Evaporator - epoxy coated at the time of manufacture to eliminate the
potential of corrosion.
ELECTRICAL CHARACTERISTICS:
• Unit completely pre-wired at factory, and ready for final connection to
a dedicated outlet. A cord and plug set to be included.
• A sole use circuit is required.
SPECIFICATIONS / FEATURES
TRUE introduces its latest offering designed specifically
to meet the needs of consultants.
TG1FRI-1S
Printed in
U.S.A.
10/03
APPROVALS:
TG Series (Roll-In Freezer)
Specifications subject to change without notice.
TRUE FOOD SERVICE EQUIPMENT, INC.
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
AIA #
SIS #
Project Name:
Location:
Item #: Qty:
Model #:
Remote cabinets available 14% off list
(condensing units supplied by others).
Consult factory technical service dept. for BTU information.
115/60/1
NEMA-5-20R
Specification Series
®
TG-Series: Roll-In Freezer
• Oversized and balanced, environmentally
friendly (R404A) refrigeration system -
holds food safe -10°F.
• Exterior - 300 series stainless steel front,
doors & bottom. Anodized quality
aluminum finished ends, back & top.
• Interior - attractive, NSF approved, white
vinyl coated aluminum sides and back.
300 series stainless floor and door liner.
• Accepts roll-in rack (inboard castor) with
maximum dimensions of
27”W x 29”D x 66”H.
(supplied by others).
• Heavy gauge reversible doors. Three cam-
lift hinges per door - lifetime guaranteed.
Designed for easy product access with a
full 180 degree open capability and stay
open feature at 120 degrees.
• Reversible wiper gaskets for positive seal.
• Recessed handles (lifetime guaranteed).
• Exterior mounted digital electronic
thermometer with manual defogger.
• Top mounted unit positioned out of food
zone to maximize storage capacity.
• Glass condensate pan to prevent
electrolysis.
• Heavy gauge stainless steel ramp
standard.
• Incandescent interior lighting.
• Magnetic door gaskets.
• Epoxy coated evaporator.
• Interior bumper protects cabinet.
• Large evaporator and coil heater permit
short defrost cycle.
• Defrost system time initiated,
temperature terminated.
• Automatic evaporator fan motor delay
during defrost cycle.
• Minimum wattage heater in cabinet
frame and door.
Standard Features ____________________________________________________________________________________________
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Printed in U.S.A.
Rough-In Data
Specifications subject to change without notice.
Dimensions Cord
Capacity (inches) NEMA Length Crated
Model Doors (Cu. Ft) L D H HP Volts PH Amps Config. (feet) Weight
TG1FRI-1S 1 37 35 34 1/2 83 3/4 3/4 115/60/1 1 13.2 5-20 9 485
5
YEAR
COMPRESSOR
S
A
V
I
N
G
S
E
N
E
R
G
Y
S
Model Front Right Plan 3D
TG1FRI-1S TFQY51E TFQY51S TFQY51P TFQX513
• Hot gas condensate for energy efficiency.
• Energy saver switch.
• Foamed-in-place polyurethane high
density cell insulation (CFC free).
• Self-contained system.
• 1 year parts & labor warranty (USA).
• 5 year compressor warranty (USA).
❒ Metal handle (solid doors only).
❒ Electronic temperature control.
❒ Correctional facility options - consult factory.
❒ Export units available - consult factory.
❒ Remote cabinets available (contact factory
technical services for BTU information).
Optional Accessories ______________
71
1
/8"
64
1
/2"
L - 89 cm
D - 88 cm
H - 213 cm
Door
Swing - 83 cm
12
5
/8"
32
1
/2"
-10
35"
30
1
/2"
2
1
/2"
32"
KCL
34
1
/2"
83
3
/4"
  • Page 1 1
  • Page 2 2

True Manufacturing TG1FRI-1S Datasheet

True Manufacturing
Brand
True Manufacturing
Model
TG1FRI-1S
Type
Datasheet

True Manufacturing TG1FRI-1S is a roll-in freezer designed to meet the needs of consultants. It features a 300 series stainless steel exterior and interior, with NSF-approved white vinyl coated aluminum sides and back. The digital exterior temperature monitor with manual defogger control allows for quick and easy temperature identification. The door gaskets are removable without tools for ease of cleaning, and the doors are reversible. The heavy-duty hinges and recessed handles provide durability and ease of use.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents