True Manufacturing TR1FRI-1S Datasheet

True Manufacturing
Brand
True Manufacturing
Model
TR1FRI-1S
Type
Datasheet

True Manufacturing TR1FRI-1S is a roll-in freezer designed to meet the needs of consultants. It features a 37 cu. ft. capacity and a -10°F interior temperature. The TR1FRI-1S is constructed of 300 series stainless steel with a foamed-in-place polyurethane insulation. It has three cam-lift hinges per door with a lifetime guarantee and a 12" long recessed handle with interlock. The TR1FRI-1S is also equipped with an oversized refrigeration system, a digital exterior temperature monitor, and incandescent interior lighting.

True Manufacturing TR1FRI-1S is a roll-in freezer designed to meet the needs of consultants. It features a 37 cu. ft. capacity and a -10°F interior temperature. The TR1FRI-1S is constructed of 300 series stainless steel with a foamed-in-place polyurethane insulation. It has three cam-lift hinges per door with a lifetime guarantee and a 12" long recessed handle with interlock. The TR1FRI-1S is also equipped with an oversized refrigeration system, a digital exterior temperature monitor, and incandescent interior lighting.

Roll-In Freezer
❒ TR1FRI-1S
5
YEAR
COMPRESSOR
S
A
V
I
N
G
S
E
N
E
R
G
Y
S
Exceptions:
CABINET CONSTRUCTION:
• Exterior - 300 series stainless steel front, shroud, top, bottom, back and
doors. 400 series stainless steel exterior sides.
• Interior - 300 series stainless steel interior cabinet side walls, back, door
liner and floor. Construction of liner in accordance with NSF standards.
• Digital exterior temperature monitor with manual defogger control, large
LED display for quick and easy temperature identification, can be converted
quickly from °F to °C (standard feature).
DOORS:
• 300 series stainless steel interior and exterior. Door gaskets of one piece
construction, and removable without tools for ease in cleaning. Doors
are reversible.
• Reinforced, heavy duty stainless steel interior floor.
• Heavy duty hinges. The face of each door fitted with a 12" long recessed
handle with interlock. Handles are foamed-in-place to insure permanent
attachment (lifetime guaranteed).
• Heavy gauge stainless steel ramp standard for each door.
INSULATION:
• Entire cabinet structure and doors insulated using foamed-in-place CFC
free polyurethane foam.
INTERIOR:
• Bumper to prevent cart from damaging interior walls.
LIGHTING:
• Incandescent interior lighting. Light(s) activated by interior, manual
on/off switch.
REFRIGERATION SYSTEM:
• Oversized refrigeration system factory balanced using CFC free R404A
refrigerant.
• Top mounted condensing unit.
• Factory pre-engineered capillary tube system with oversized condenser
and evaporator to reduce product pull down time and to consistently
maintain food safe -10°F interior cabinet temperature.
• Defrost system time initiated, temperature terminated.
• Automatic evaporator fan motor delay during defrost cycle.
• Large evaporator and coil heater permit short defrost cycle.
• Evaporator - epoxy coated at the time of manufacture to eliminate the
potential of corrosion.
ELECTRICAL CHARACTERISTICS:
• Unit completely pre-wired at factory, and ready for final connection to
a dedicated outlet. A cord and plug set to be included.
• A sole use circuit is required.
SPECIFICATIONS / FEATURES
TRUE introduces its latest offering designed specifically
to meet the needs of consultants.
TR1FRI-1S
Printed in
U.S.A.
10/03
APPROVALS:
TR Series (Roll-In Freezer)
Specifications subject to change without notice.
TRUE FOOD SERVICE EQUIPMENT, INC.
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
AIA #
SIS #
Project Name:
Location:
Item #: Qty:
Model #:
Remote cabinets available 14% off list
(condensing units supplied by others).
Consult factory technical service dept. for BTU information.
115/60/1
NEMA-5-20R
Specification Series
®
TR-Series: Roll-In Freezer
• Oversized and balanced, environmentally
friendly (R404A) refrigeration system -
holds food safe -10°F.
• Exterior - 300 series stainless steel front,
top, bottom and back. Stainless steel
sides.
• Interior - 300 series stainless steel walls,
back, floor and door liner.
• Accepts roll-in rack (inboard castor) with
maximum dimensions of
27”W x 29”D x 66”H.
(supplied by others).
• Heavy gauge reversible doors. Three
cam-lift hinges per door - lifetime
guaranteed. Designed for easy product
access with a full 180 degree open
capability and stay open feature at 120
degrees.
• Reversible wiper gaskets for positive seal.
• 300 series stainless steel doors with
recessed handles (lifetime guaranteed).
• Exterior mounted digital electronic
thermometer with manual defogger.
• Top mounted unit positioned out of food
zone to maximize storage capacity.
• Glass condensate pan to prevent
electrolysis.
• Heavy gauge stainless steel ramp
standard.
• Incandescent interior lighting.
• Magnetic door gaskets.
• Epoxy coated evaporator.
• Interior bumper protects cabinet.
• Large evaporator and coil heater permit
short defrost cycle.
• Defrost system time initiated,
temperature terminated.
• Automatic evaporator fan motor delay
during defrost cycle.
• Minimum wattage heater in cabinet
frame and door.
• Hot gas condensate for energy efficiency.
Standard Features ____________________________________________________________________________________________
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Printed in U.S.A.
Rough-In Data
Specifications subject to change without notice.
Dimensions Cord
Capacity (inches) NEMA Length Crated
Model Doors (Cu. Ft) L D H HP Volts PH Amps Config. (feet) Weight
TR1FRI-1S 1 37 35 34 1/2 83 3/4 3/4 115/60/1 1 13.2 5-20 9 485
5
YEAR
COMPRESSOR
S
A
V
I
N
G
S
E
N
E
R
G
Y
S
Model Front Right Plan 3D
TR1FRI-1S TFQY51E TFQY64S TFQY51P TFQY643
• Energy saver switch.
• Foamed-in-place polyurethane high
density cell insulation (CFC free).
• Self-contained system.
• 1 year parts & labor warranty (USA).
• 5 year compressor warranty (USA).
❒ Metal handle (solid doors only).
❒ Electronic temperature control.
❒ Correctional facility options - consult factory.
❒ Export units available - consult factory.
❒ Remote cabinets available (contact factory
technical services for BTU information).
Optional Accessories ______________
71
1
/8"
64
1
/2"
L - 89 cm
D - 88 cm
H - 213 cm
Door
Swing - 83 cm
12
5
/8"
32
1
/2"
-10
35"
30
1
/2"
2
1
/2"
32"
KCL
34
1
/2"
83
3
/4"
  • Page 1 1
  • Page 2 2

True Manufacturing TR1FRI-1S Datasheet

True Manufacturing
Brand
True Manufacturing
Model
TR1FRI-1S
Type
Datasheet

True Manufacturing TR1FRI-1S is a roll-in freezer designed to meet the needs of consultants. It features a 37 cu. ft. capacity and a -10°F interior temperature. The TR1FRI-1S is constructed of 300 series stainless steel with a foamed-in-place polyurethane insulation. It has three cam-lift hinges per door with a lifetime guarantee and a 12" long recessed handle with interlock. The TR1FRI-1S is also equipped with an oversized refrigeration system, a digital exterior temperature monitor, and incandescent interior lighting.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents