89” Tall Roll-In Refrigerator
❒ TA1RRI89-1S
5
YEAR
COMPRESSOR
S
A
V
I
N
G
S
E
N
E
R
G
Y
S
Exceptions:
CABINET CONSTRUCTION:
• Exterior - 300 series stainless steel front, shroud, top, bottom, back and
doors. 400 series stainless steel exterior sides.
• Interior - NSF approved white vinyl coated aluminum sides and back. 300
series stainless floor and door liner.
• Digital exterior temperature monitor with manual defogger control, large
LED display for quick and easy temperature identification.
DOORS:
• 300 series stainless steel exterior with 300 series stainless steel interior
door liner. Door gaskets of one piece construction, and removable without
tools for ease in cleaning. Doors are reversible.
• Reinforced, heavy duty stainless steel interior floor.
• Heavy duty hinges. The face of each door fitted with a 12" long recessed
handle with interlock. Handles are foamed-in-place to insure permanent
attachment (lifetime guaranteed).
• Heavy gauge stainless steel ramp standard for each door.
INSULATION:
• Entire cabinet structure and doors insulated using foamed-in-place CFC
free polyurethane foam.
INTERIOR:
• Stainless steel bumper to prevent cart from damaging interior walls.
LIGHTING:
• Incandescent interior lighting. Light(s) activated by interior, manual
on/off switch.
REFRIGERATION SYSTEM:
• Refrigeration system factory balanced using CFC free 134A refrigerant.
• Top mounted condensing unit.
• Factory pre-engineered capillary tube system with oversized condenser
and evaporator to reduce product pull down time and to consistently
maintain food safe 33° to 38°F interior cabinet temperature.
• Evaporator - epoxy coated at the time of manufacture to eliminate the
potential of corrosion.
ELECTRICAL CHARACTERISTICS:
• Unit completely pre-wired at factory, and ready for final connection to
a dedicated outlet. A cord and plug set to be included.
• A sole use circuit is required.
SPECIFICATIONS / FEATURES
TRUE introduces its latest offering designed specifically
to meet the needs of consultants.
TA1RRI89-1S
Printed in
U.S.A.
10/03
APPROVALS:
TA Series (Roll-In Refrigerator)
Specifications subject to change without notice.
R
TRUE FOOD SERVICE EQUIPMENT, INC.
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
AIA #
SIS #
Project Name:
Location:
Item #: Qty:
Model #:
115/60/1
NEMA-5-15R
Remote cabinets available 14% off list
(condensing units supplied by others).
Consult factory technical service dept. for BTU information.
®
C US
Specification Series
®
TA-Series: 89” Tall Roll-In Refrigerator
• Oversized and balanced, environmentally
friendly (134A) refrigeration system - holds
food safe 33°F to 38°F.
• Exterior - 300 series stainless steel fronts,
backs, top, bottom and doors. Stainless
steel ends.
• Interior - attractive, NSF approved, white
vinyl coated aluminum sides and back.
300 series stainless floor and door liner.
• TA1RRI89-1S accepts roll-in rack (inboard
castor) with maximum dimensions of
27”W x 29”D x 72”H.
(supplied by others).
• Exterior mounted digital electronic
thermometer with manual defogger.
• Heavy guage reversible doors. Three
cam-lift hinges per door - lifetime
guaranteed. Designed for easy product
access with a full 180 degree open
capability and stay open feature at 120
degrees.
• Reversible wiper gaskets for positive seal.
• Recessed handles (lifetime guaranteed).
• Top mounted unit positioned out of food
zone to maximize storage capacity.
• Glass condensate pan to prevent
electrolysis.
• Hot gas condensate for energy efficiency.
• Heavy gauge stainless steel ramp
standard for each door.
Standard Features____________________________________________________________________________________________
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Printed in U.S.A.
Rough-In Data
Specifications subject to change without notice.
Dimensions Cord
Capacity (inches) NEMA Length Crated
Model Doors (Cu. Ft) L D H HP Volts PH Amps Config. (feet) Weight
TA1RRI89-1S 1 38 35 34 1/2 89 1/3 115 1 8.5 5-15 9 485
76
3
/8"
12
5
/8"
35
5
YEAR
COMPRESSOR
S
A
V
I
N
G
S
E
N
E
R
G
Y
S
64
1
/2"
L - 89 cm
D - 88 cm
H - 226 cm
Door
Swing - 83 cm
32
1
/2"
35"
30
1
/2"
2
1
/2"
32"
R
Model Front Right Plan 3D
TA1RRI89-1S TFQY91E TFQY83S TFQY51P TFQY913
• Incandescent interior lighting.
• Magnetic door gaskets.
• Epoxy coated evaporator.
• Interior bumpers protect cabinet.
• 1 year parts & labor warranty (USA).
• 5 year compressor warranty (USA).
❒ Export units available - consult factory.
❒ Metal handle (solid doors only).
❒ Electronic temperature control.
❒ Correctional facility options - consult factory.
❒ Remote cabinets available (contact factory
technical services for BTU information).
Optional Accessories ______________
89"
34
1
/2"
®
C US
KCL
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
True Manufacturing TR1RRI89-1S Datasheet
-
-
-
-
-
-
-
-
-