True Manufacturing TR1RRI89-1S Datasheet

Type
Datasheet
89” Tall Roll-In Refrigerator
TR1RRI89-1S
5
YEAR
COMPRESSOR
S
A
V
I
N
G
S
E
N
E
R
G
Y
S
Exceptions:
CABINET CONSTRUCTION:
Exterior - 300 series stainless steel front, shroud, top, bottom, back and
doors. 400 series stainless steel exterior sides.
Interior - 300 series stainless steel interior cabinet side walls, back, door
liner and floor. Construction of liner in accordance with NSF standards.
Digital exterior temperature monitor with manual defogger control, large
LED display for quick and easy temperature identification.
DOORS:
300 series stainless steel interior and exterior. Door gaskets of one piece
construction, and removable without tools for ease in cleaning. Doors
are reversible.
Reinforced, heavy duty stainless steel interior floor.
Heavy duty hinges. The face of each door fitted with a 12" long recessed
handle with interlock. Handles are foamed-in-place to insure permanent
attachment (lifetime guaranteed).
Heavy gauge stainless steel ramp standard for each door.
INSULATION:
Entire cabinet structure and doors insulated using foamed-in-place CFC
free polyurethane foam.
INTERIOR:
Stainless steel bumper to prevent cart from damaging interior walls.
LIGHTING:
Incandescent interior lighting. Light(s) activated by interior, manual
on/off switch.
REFRIGERATION SYSTEM:
Refrigeration system factory balanced using CFC free 134A refrigerant.
Top mounted condensing unit.
Factory pre-engineered capillary tube system with oversized condenser
and evaporator to reduce product pull down time and to consistently
maintain food safe 33° to 38°F interior cabinet temperature.
Evaporator - epoxy coated at the time of manufacture to eliminate the
potential of corrosion.
ELECTRICAL CHARACTERISTICS:
Unit completely pre-wired at factory, and ready for final connection to
a dedicated outlet. A cord and plug set to be included.
A sole use circuit is required.
SPECIFICATIONS / FEATURES
TRUE introduces its latest offering designed specifically
to meet the needs of consultants.
TR1RRI89-1S
Printed in
U.S.A.
10/03
APPROVALS:
TR Series (Roll-In Refrigerator)
Specifications subject to change without notice.
R
TRUE FOOD SERVICE EQUIPMENT, INC.
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
AIA #
SIS #
Project Name:
Location:
Item #: Qty:
Model #:
115/60/1
NEMA-5-15R
Remote cabinets available 14% off list
(condensing units supplied by others).
Consult factory technical service dept. for BTU information.
®
C US
Specification Series
®
TR-Series: 89” Tall Roll-In Refrigerator
Oversized and balanced, environmentally
friendly (134A) refrigeration system - holds
food safe 33°F to 38°F.
Exterior - 300 series stainless steel front,
top, bottom and back. Stainless steel
sides.
Interior - 300 series stainless steel walls,
back, floor and door liner.
TR1RRI89-1S accepts roll-in rack (inboard
castor) with maximum dimensions of
27W x 29D x 72H.
(supplied by others).
Exterior mounted digital electronic
thermometer with manual defogger.
Heavy guage reversible doors. Three
cam-lift hinges per door - lifetime
guaranteed. Designed for easy product
access with a full 180 degree open
capability and stay open feature at 120
degrees.
Reversible wiper gaskets for positive seal.
300 series stainless steel doors with
recessed handles (lifetime guaranteed).
Top mounted unit positioned out of food
zone to maximize storage capacity.
Glass condensate pan to prevent
electrolysis.
Hot gas condensate for energy efficiency.
Heavy gauge stainless steel ramp
standard for each door.
Standard Features____________________________________________________________________________________________
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Printed in U.S.A.
Rough-In Data
Specifications subject to change without notice.
Dimensions Cord
Capacity (inches) NEMA Length Crated
Model Doors (Cu. Ft) L D H HP Volts PH Amps Config. (feet) Weight
TR1RRI89-1S 1 38 35 34 1/2 89 1/3 115 1 8.5 5-15 9 485
76
3
/8"
12
5
/8"
35
5
YEAR
COMPRESSOR
S
A
V
I
N
G
S
E
N
E
R
G
Y
S
64
1
/2"
L - 89 cm
D - 88 cm
H - 226 cm
Door
Swing - 83 cm
32
1
/2"
35"
30
1
/2"
2
1
/2"
32"
R
Model Front Right Plan 3D
TR1RRI89-1S TFQY91E TFQY83S TFQY51P TFQY913
Incandescent interior lighting.
Magnetic door gaskets.
Epoxy coated evaporator.
Interior bumpers protect cabinet.
1 year parts & labor warranty (USA).
5 year compressor warranty ((USA).
Export units available - consult factory.
Metal handle (solid doors only).
Electronic temperature control.
Correctional facility options - consult factory.
Remote cabinets available (contact factory
technical services for BTU information).
Optional Accessories ______________
89"
34
1
/2"
®
C US
KCL
  • Page 1 1
  • Page 2 2

True Manufacturing TR1RRI89-1S Datasheet

Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI