Meyra 2.370 Maintenance And Service Manual

Brand: Meyra

Model: 2.370

Type: Maintenance And Service Manual

This manual is also suitable for

2.360

Meyra 2.370 is a device that offers a range of features and possible use cases to assist users. It can be adapted to the individual needs of the user, allowing for a customized experience. Some of the key capabilities of Meyra 2.370 include:

Customization: The device can be tailored to the user's specific requirements through various adjustments and adaptations, ensuring a comfortable and supportive fit.
Mobility: Meyra 2.370 enhances user mobility by providing support and stability, enabling them to move around more easily and independently.
Comfort: The device is designed with comfort in mind, featuring adjustable components such as the seat, leg supports, and armrests, allowing users to find the most comfortable position.

Customization: The device can be tailored to the user's specific requirements through various adjustments and adaptations, ensuring a comfortable and supportive fit.
Mobility: Meyra 2.370 enhances user mobility by providing support and stability, enabling them to move around more easily and independently.
Comfort: The device is designed with comfort in mind, featuring adjustable components such as the seat, leg supports, and armrests, allowing users to find the most comfortable position.

We move people.

Maintenance and Service

manual

Adaptive wheelchair

Models: 2.360 / 2.370

Contents

General 4

Foreword 4

Requirements concerning workshop personnel 4

Customer support 4

Information to maintenance and service work: 5

Term deﬁnitions 5

Overview 6

Model 2.360 6

Model 2.370 6

Vehicle identiﬁcation 7

Safety information 8

Storage 8

Required tools and aids 9

Service work 9

Adaptation and adjustment jobs 9

Leg supports 10

Footboard 10

Adjusting the height of the footboard 10

Adjusting the angle of the footboard 10

Depth adjustment of the footboard 11

Changing the seat width 11

Footplates 12

Adjusting the height of the footplate 12

Arm support 13

Clothes guard 13

Adapting the clothes guard 13

Height adjustable arm supports 14

Height adjustment of the arm support 14

Aligning the arm support 14

Back support 15

Removing the back support upholstery 15

Placing the back support upholstery 15

Seat 16

Seat pad 16

Removing the seat strap 16

Assembly of seat strap/belt 16

Changing the seat width 17

Wheels 18

Changing the tyres 18

Steering wheels 18

Adjusting the angle of the steering head 19

Drive wheels 20

Handrims 20

Brakes 21

Adjusting the pressure brakes 21

Fine adjustment of the pressure brakes 21

Repositioning the pressure brakes 21

Adjusting the swing brakes 22

Adjusting the drum brakes 23

Support castors 24

Assembly position of the support castor 24

Correct support castors length 24

Height adjustment 24

Angle adjustment 24

Individual adjustment 25

Toe-in correction of the drive wheels 25

Seat height /Seat angle 25

Front seat height (FSH), model 2.360 26

Rear seat height (RSH), model 2.360 28

Front seat height (FSH), model 2.370 29

Rear seat height (RSH), model 2.370 31

Vario block 32

Axle position/balance point 32

Repositioning the vario block 32

Maintenance 33

Reinstallment 33

Checklist of the annual maintenance jobs 34

DIN norms and guidelines 36

Torque according to DIN for screwed connections 36

Notes 37

GENERAL

Foreword

This maintenance and service manual is intended

for the specialist dealer and describes all adapta-

tions and adjustments as well as the required ser-

vice, maintenance, repair and replacement jobs.

☞ This maintenance and service manual is sup-

plemented by the following documents:

– the model dependent operating manual,

(an operating manual is supplied with each ve-

hicle),

– the model dependent spare parts list,

(the required spare parts list can be obtained

through the specialist dealer access on our

website).

All required documents as well as additional infor-

mation to our products are located on our website

under:

< www.meyra.com >.

Requirements concerning workshop

personnel

Special knowledge is required to carry out the

maintenance and service work described in this

maintenance and service manual and may there-

fore only be carried out by educated qualiﬁed per-

sonnel.

☞ We therefore oﬀer vehicle speciﬁc courses that

provide the specialised personnel with the re-

quired qualiﬁcation.

Attention:

During all corresponding work there is always a

danger of jamming or skin abrasions!

Knowledge of this maintenance and service

manual as well as the supplementing docu-

ments (view chapter foreword) is mandatory

for the correct and safe execution of the work

required on the wheelchair.

The document, especially the chapter Safety

information on page 8, must therefore be

read carefully and observed by all persons, that

are assigned to work on the wheelchair.

Customer support

Technical questions will gladly be answered by

your national Meyra distribution partner.

Term deﬁnitions

Here you will ﬁnd explanations to the term used in

this manual:

Information to maintenance and ser-

vice work:

☞ Every wheelchair should undergo inspection

once a year.

– The inspection increases the safety and ex-

tends the life span of the wheelchair.

☞ For highly strained wheelchairs for example in

case of:

– extreme strain,

– user still growing,

– users with changing disease patterns,

it is recommended to have the wheelchair

checked, maintained and if required adjusted

semi-annually.

– Only original spare parts are to be used for all

maintenance and service.

☞ All screwed connections, if not otherwise not-

ed, tightened according to table Torque accord-

ing to DIN for screwed connections on page 36.

☞ The checklist of the annual inspection (for

checking oﬀ) should be used for copying.

– Checklists that have been completed

should be stored and a copy handed out

to the customer!

OVERVIEW

Model 2.360

Model 2.370

VEHICLE IDENTIFICATION

For a deﬁnite vehicle identiﬁcation in case you have

questions, or for spare parts orders, the following

data can be read oﬀ of the type plate:

☞ view sample-type plate [1]

1. The model description (in the ﬁeld Type resp.

Typ)

2. The serial number (beside the ﬁeld SN)

SAFETY INFORMATION

☞ Wear suitable clothing as well as if required

gloves and protective glasses.

– Danger of injuries caused by inappropriate

work clothes.

☞ Secure the product against unintentionally roll-

ing oﬀ, tilting over or falling down e. g. from

the workbench.

– Damages due to a not secured wheelchair.

☞ Clean/disinfect the product before inspection.

☞ Observe the care- and product speciﬁc inspec-

tion instruction included in the corresponding

operating manual.

– Damages due to neglected cleaning.

☞ Keep your workspace clean and only use clean

cloths.

– Damages caused by shavings and dirt par-

ticles.

☞ Use only suitable tools.

☞ View chapter Required tools and aids on

page 9.

– Damages caused by the use of incorrect

tools.

☞ Replace loose screwed connections with

thread safety with the respective nut or screw

and new thread safety.

☞ If new screws or nuts with thread safety

not be available, apply liquid thread safe-

ty compound with medium hardness e. g.

Loctite® 241 or Euro Lock A24.20.

– Damages caused by loose screwed con-

nections.

Storage

Dismantled parts are to be placed resp. stored safe-

ly and protected as well as sorted by commission.

REQUIRED TOOLS AND AIDS

For adjustments and maintenance we recommend the use

of high quality tools.

☞ High quality tools can prevent for example damages to

the surface of the frame as well as minor injuries to the

hand.

The tools required most frequently are:

– Socket wrench

– Open-end or ring spanner

– Hexagon socket spanner

– Phillips screwdriver

– Slot screw drivers

SERVICE WORK

Before beginning with the service work check the general

condition of the wheelchair.

ADAPTATION AND ADJUSTMENT

JOBS

The following chapters describe the ﬁtting of the wheel-

chair to the changing individual demands of the user.

Attention:

Every new adaptation can change the driving behav-

iour.

LEG SUPPORTS

Footboard

Adjusting the height of the footboard

– for height adjustment, depending on model, remove

the screw (1) on both sides.

– Telescope the footplate evenly to the desired height

and then secure it with the screws (1) on both sides

(tightening torque 10_Nm).

☞ The maximum length is reached when a marker be-

comes visible on the tube.

Adjusting the angle of the footboard

– For adjustment of the footboard angle, swivel the foot-

board down and afterwards loosen the screw (2) on

both sides.

– Tilt the footboard, evenly on both sides, to the desired

angle and retighten the screw (2) on both sides.

Depth adjustment of the footboard

(only with model 2.360)

Depth adjustment of the footboard is carried out by repo-

sitioning the removable distancers (3) or by turning around

the asymmetrical footboard (6).

Repositioning the removable distancers

– Lift the footboard slightly on the side that can be folded

open.

– Reposition the desired amount of distancer pieces on

the side that can be folded open [4]).

– Pull/press the distancers that are to be repositioned on

the ﬁrm side of the footboard outward from the retain-

ing rod (5).

☞ Note:

In certain angle settings of the footboard it is possible

that a removal or placing of certain distancer pieces is

not possible. Then fold up the footboard.

– Reposition the footboard and insert the distancer piec-

es back again as far as possible to the retaining rod.

– Swivel the footboard down and hook it into place.

Turning around the footplate

– Remove the footboard screws (7).

– Turn the footboard horizontally by 180°.

– Mount the footboard screws (7).

Changing the seat width

In order to change the seat width, the following assembly

groups are to be replaced:

1. The back support

2. The footboard

3. The seat belt

4. The crossbrace

5. The horizontal push bar

FOOTPLATES

Adjusting the height of the footplate

1. Remove the screw (1) on both sides to adjust the height.

2. Telescope the footplates evenly to the desired height

and then secure it with the screws (1) on both sides

(tightening torque 10 Nm).

☞ The maximum length is reached when a marker be-

comes visible on the tube.

ARM SUPPORT

Clothes guard

The clothing guard [1] running parallel to the circumference

of the wheel has to be adjusted to the selected wheel po-

sition and size.

Attention:

The distance between the driving wheel and the

clothes guard should be as small as possible, approx.

1 cm. – Danger of jamming!

Adapting the clothes guard

After loosening the two screws (2)+(3) the clothes guard

can be slightly adjusted.

☞ Before changing the axle position of the drive wheel

in horizontal or vertical direction, remove the clothes

guard!

1. For this disassemble the screws (2)+(3).

2. Reposition the clothes guard.

3. Afterwards remount the screws (2)+(3).

Height adjustable arm supports

The arm support is height adjustable in 5 positions of 15 mm

each.

Height adjustment of the arm support

1. For height adjustment, loosen the screws (1) until the

arm support can be adjusted in height.

☞ Note:

Always adjust the arm support so far that the screw (2)

ﬁts into one of the 5 possible hole positions.

2. After height adjustment of the arm support, retighten

the screws (1).

Attention:

After each height adjustment of the arm support check

it for secure hold.

– Danger of injury!

Aligning the arm support

3. Unscrew the screws (1) for horizontal alignment of the

arm support.

4. Align the arm support horizontally to your demand with

the help of a hex socket key through the eccentric (3).

+ 3

BACK SUPPORT

Removing the back support upholstery

For removal, ﬁrst pull oﬀ the rear part of the back support

cushion and fold it over to the front [1]. Afterwards pull the

back support cushion oﬀ of the adjustable back support up-

holstery [2].

Placing the back support upholstery

To attach the back support upholstery [3], place it even with

the upper edge of the back support tubes in the middle of

the spanning strap (4) and attach it to the adjustable back

support strap with the velcro straps [1].

☞ For a soft upper edge you should leave a little space

between the upper spanning belt (4) and the folded

back support upholstery [5].

☞ Note:

When the user leans against the front cushion again,

pay attention that:

☞ The pressure of the back must be spread evenly

throughout the back cover.

☞ A complete hand should ﬁt in between the cover and

back at the upper edge of the back cover.

☞ The head of the user must be held at balance by the

back cover.

SEAT

Seat pad

The seat cushion [1] is aligned according to the course of the

loop strap in the middle and in line with the front edge of

the seat strap.

Removing the seat strap

First take out the tube plugs to remove the seat strap, then

pull the seat strap out of the seat tubes [2].

Assembly of seat strap/belt

1. To mount the seat belt, slide the loops at the side with

inserted plastic rod into the guide groove of each seat

tube.

☞ Depending on the seat depth the diﬀerence between

seat belt and seat tube is evened out with distancer

pieces (B) resp. tube extensions (A)/(C).

2. Afterwards remount the tube plugs on each seat tube.

Changing the seat width

In order to change the seat width, the following assembly

groups are to be replaced:

1. The back support

2. The footboard

3. The seat belt

4. The crossbrace

5. The horizontal push bar

☞ Ensure that the screws (3) of the additional support

cross braces are mounted evenly on both sides in a

suitable position.

☞ When unfolded the seat belt should not be too tight

and only have a little lag.

– Short additional support cross brace = seat width from

32 - 38 cm

– Medium cross brace = seat width from 40 - 46 cm

– Long additional support cross brace = seat width from

48 - 52 cm

WHEELS

Changing the tyres

☞ Note:

Always change tyres in pairs. – Diﬀerently worn tyres

can impair the straight-on travel of the wheelchair.

Attention:

Ensure that the tyre cover is always removed and rein-

stalled with the appropriate tyre levers (bicycle acces-

sories).

Never use screw drivers or other pointed /sharp edged

objects as levers!

Steering wheels

To change or adjust the seat height the steering wheels can

be removed.

For this dismantle the respective steering wheel axle (1).

☞ Note:

Take note of the arrangement of all sleeves and washers

used.

Adjusting the angle of the steering head

The angle of the steering head should be set at 90° to the

driving surface for best driving characteristics.

Model 2.360

1. Before adjusting the steering head angle remove the

steering head cover (1).

2. For adjustment of the castor stem angle loosen the

attachment screw (2)+(3) and reposition the toothing

evenly.

☞ The castor stem can be adjusted from [12°] to [-12°].

12°

-12°

Model 2.370

1. Before adjusting the steering head angle remove the

steering head cover (1).

2. For adjustment of the castor stem angle loosen the at-

tachment screw (2)+(3) and reposition the steering fork

vertically to the ground.

☞ The castor stem angle is continuously adjustable.

Drive wheels

Handrims

The distance of the handrim can be adjusted from 15 mm to

25 mm to the drive wheel.

3. Depending on version the attachment screws for ad-

justment of the handrim distance (4) are to be loosened

or removed.

☞ For exchanging or replacing the handrims the corre-

sponding attachment screws (4) are to be removed.

Page is loading ...

Meyra 2.370 Maintenance And Service Manual

Brand: Meyra

Model: 2.370

Type: Maintenance And Service Manual

This manual is also suitable for

2.360

Customization: The device can be tailored to the user's specific requirements through various adjustments and adaptations, ensuring a comfortable and supportive fit.
Mobility: Meyra 2.370 enhances user mobility by providing support and stability, enabling them to move around more easily and independently.
Comfort: The device is designed with comfort in mind, featuring adjustable components such as the seat, leg supports, and armrests, allowing users to find the most comfortable position.

Download PDF

report

Meyra 2.370 Maintenance And Service Manual

This manual is also suitable for

Meyra 2.370 Maintenance And Service Manual

Related papers

Other documents