2. HUUM
  3. UKU FRAME

HUUM UKU FRAME Operating instructions

  • I have reviewed the installation instructions for the UKU Glass/Mirror/Gold surface frame. This document guides you through the process of correctly mounting the frame, including how to orient the remote control and connect the cable. I'm ready to answer any specific questions you have about the process or the device itself.
  • How do I insert the remote control housing into the frame?
    Which way should the bent edges face during installation?
    What is the correct orientation of the cable opening?
KINNITUSRAAMI JUHEND
SURFACE FRAME INSTRUCTION
UKU Glass/Mirror/Gold
Sisestada klaaspuldi tagumine korpus raami sisse nii,
et kruviavad jääksid kohakuti.
Painutatud servad puldi poole, kaabliava seina poole.
Jälgida, et kaabliava jääks suunaga alla poole.
Lase kruvidega seina ning paigalda klaas.
UKU Glass/Mirror/Gold
kinnitusraami juhend
EN
Insert the rear housing of the glass remote control into
the frame so that the screw holes line up.
Bent edges towards the remote control, cable
opening towards the wall.
Make sure that the cable opening faces downwards.
Screw the wall and install the glass.
UKU Glass/Mirror/Gold surface
frame instruction
Leia kõige ajakohasem materjal meie kodulehelt www.huum.ee
Find the latest updates on our website www.huum.eu
ET
2
3
4
1
2
3
4
1
/