6
4 4-1
2 3
1
Important Safety Instructions
Installation Instruction
WARNING
1.Switch off before installation.
2.Switch on only after complete installation and examination of the circuit.
3.Professional electrician for installation and maintenance only. Turn Off
Power Supply
Basic safety precautions should always be followed when installing, including the following:
1. Read all instructions.
2. Licensed electrician for installation only.
3. Always ensure the power is OFF and the fitting has cooled down before performing any
maintenance, cleaning, changing the globe or adjustment to the fitting.
4. Do not install any luminaire near the heat source.
5. Do not exceed the nominal supply voltage or amperage ratings.
6. To avoid injury or damage to the fitting, please ensure that power leads and screws are secure
before connecting the power.
Wall mounted installation
COMPLETE
2
1
3
select preferred
colour temperature
for product in CCT
change function only
Mains Cable entry (1X)
Mains Cable entries (2X)
N
LSwitched
Earth
Neutral
5 5-1
2
1
1
2
The light source contained in
this luminaire shall only be
replaced by the manufacturer
or his service agent or a
similar qualified person.
Caution,risk of
Electric shock.
If the external flexible cable or cord of this
luminaire is damaged, it shall be
exclusively replaced by the manufacturer
or his service agent or a similar qualified
person in order to avoid a hazard.
Wire diameter: 0.5-2.5mm²
Wire stripping length: 8-10mm
N
LSwitched
Earth
Neutral
Wire diameter:
0.5-2.5mm²
Wire stripping length:
8-10mm
