- INSTRUCTIONS -
The AI-HS100 is a handset sub station used in conjunction with the AI-CP170 Interface board and a 25V speaker as a
remote station on the AI-900 system. The handset offers off-hook ringing to the master station, two-way
communication, and muting the overhead speaker when picked up. Use this confuguration in areas where open voice
and handset remote stations are needed.
Handset Sub with Off-hook Calling, 25V Speaker, and AI-CP170 board
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
TOLL FREE TECHNICAL SUPPORT: (800) 692-0200
E-MAIL: [email protected]
AH-HS100 Instr.
0309JDJS
SPECIFICATIONS:
See specifications contained in standard product literature.
WIRING DIAGRAM:
4 terminal to
1.25W Tap on
Transformer
Gray to
Common of
Transformer
Gray
Red
Brown
Orange
Violet
Black
Violet
SP-2570N
8
Speaker with 25V
Transformer
GY BR OG VI G
AI-CP170
Connector on
AI-900RS Card
RD BK VI
*Top View of
Connector
AI-HS100
4
3
2
1
L
L
OPERATION:
1. When the master station calls the remote speaker/handset
station, audio communication will be through the speaker.
2. If the handset is picked up during communication, audio will
be routed through the handset and will not be heard through
the speaker.
3. To place a call, simply pick up the handset and wait for a
reply from the master station.
4. To conclude the call, hang up the handset.
Note:
If using AI-HS100 without a speaker leave the jumper between
pins 3 and 4 installed. If using the AI-HS100 with a speaker
remove the brass jumper.
Remove Jumper
See Note
*Important, When connector
is plugged into AI-900RS,
Orange should be on top
/