Hunter Engineering Heavy-Duty Quick start guide

Brand: Hunter Engineering

Model: Heavy-Duty

Type: Quick start guide

Pit Racks

For Heavy-Duty Trucks and Buses

4Full-length rail system supports use

of optional jacks for both front and

rear axle lifting

418,000-lb. (8,165-kg) maximum

front axle weight capacity

458 in. (1,473 mm) pit depth allows

a technician to work upright

4Adjustable runways handle a wide range

of track widths

4 Removable heavy-duty runways

give maximum workspace

Available options:

Extra 10 ft. (3,048 mm) Rail Kit (20-1517-1)

Multiples of 10 ft. (3,048 mm) can be added

410,000-lb. (4,536-kg)

maximum front axle weight capacity

436 in. (914 mm) pit depth

4 50 tn (45 t) work beam capacity

4Adjustable runways handle a wide range

of track widths

418,000-lb. (8,165-kg) maximum

front axle weight capacity

4 58 in. (1,473 mm) pit depth allows

a technician to work upright

4 100 tn (90.7 t) work beam capacity

4 Adjustable runways handle a wide range

of track widths

4 Removable heavy-duty runways

give maximum workspace

Available options:

T-Extension Kit (20-869-1)

Extra Rail Kit (20-1517-1)

Shallow pit alternative

Popular equipment options

Full-depth pits for maximum efﬁciency

Rolling Jack Support (11-637-1)

4 Designed for various styles of jacks,

including bottle jacks

4 Provides lifting capability on any

axle at any point on the rails

Simple controls and large lifting capacity.

HD Pit Jack (133-77-2)

4 32,500 lbs. (14,742 kg) total capacity or

17,500 lbs. (7,938 kg) per cylinder

4 Air powered and hydraulically driven

4 Cylinders can be individually adjusted side to side

4 Suitable for PT pit and PF pit with optional T-extension

Turnplates:

Stainless Steel Electronic

Truck Turnplates (shown)

(25-158-1)

Electronic Truck Turnplates

(25-139-1)

Heavy-Duty Truck Turnplates

for Audit Purposes (shown)

(25-71-1)

Standard Heavy-Duty

Truck Turnplates

(25-24-1)

Model PT shown with optional Rolling Jack Support

Model PF with optional T-Extension

Model PT Heavy-Duty Alignment T-Pit System Model PE Medium-Duty Alignment System with beam

Model PF Heavy-Duty Alignment System with beam

T-extension

Because of continuing technological advancements, speciﬁcations,

models and options are subject to change without notice.

Form 3057-T, 03/15

Supersedes 3057-T, 11/14

Speciﬁcations and site requirements

Model PT

For Model PT blueprint, order 4731-T

15 ft.

(4,572 mm)

10 ft. max.

(3,048 mm)

20 ft.

(6,096 mm)

61.625 in.

(1,565 mm)

Minimum:

12 ft. 10 in.

(3,911 mm)

34 in.

(864 mm)

Pit Depth - 58 in.

(1,473 mm)

18 in.

(457 mm)

Model PF with T-extension

For Model PF blueprint, order 3507-T

15 ft.

(4,572 mm)

10 ft. max.

(3,048 mm)

20 ft.

(6,096 mm)

61.625 in.

(1,565 mm)

Minimum:

12 ft. 10 in.

(3,911 mm)

34 in.

(864 mm)

Pit Depth - 58 in.

(1,473 mm)

18 in.

(457 mm)

For information on Hunter

WinAlign Alignment Systems,

see Form 995-T.

For information on Hunter

Heavy-Duty Power Racks,

see Form 4986-T.

0315M

11250 Hunter Drive, Bridgeton, MO 63044 U.S.A.

Tel: 1-314-731-3020 • Fax: 1-314-731-0132

E-mail: [email protected]

Models PE and PF without T-extension

For Model PF blueprint without T-extension, order 752-T

For Model PE blueprint, order 744-T

15 ft.

(4,572 mm)

10 ft. max.

(3,048 mm)

61.625 in.

(1,565 mm)

Minimum:

12 ft. 10 in.

(3,911 mm)

PE - 36 in.

(914 mm)

PF - 58 in.

(1,473 mm)

Pit Depth

18 in.

(457 mm)

Important:

Refer to construction blueprints before starting project.

Dimensions shown here are abbreviated for clarity.

Hunter Engineering Heavy-Duty Quick start guide

Hunter Engineering Heavy-Duty Quick start guide

Hunter Engineering Heavy-Duty Quick start guide

Related papers

Other documents