2. Durabook
  3. R11
R11

Durabook R11 User manual

  • Hello! I've reviewed the user manual for the DURABOOK R11 Rotating Hand Strap. This document provides installation instructions and details about the included components. I'm ready to answer your questions about the installation and usage of this hand strap, designed to secure your tablet.
  • What items are included in the package?
    How do I install the rotating hand strap?
    Where does one insert their hand?
©2021 Twinhead International Corp and/or its affiliates. All rights reserved.
1
R11 Rugged Tablet
Rotating Hand Strap
P/N: 62+031030+00
Rotating Hand Strap
2
Package Contents
If any of following items is damaged, please contact your retailer.
Rotating hand strap
Bracket (4)
Screw (8)
NOTE
The pictures are for reference only, actual items may slightly differ.
Rotating Hand Strap
3
Installation
This section will guide you on how to install the rotating hand strap of your
tablet.
Installing the Rotating Hand Strap
To install the rotating hand strap, follow the steps below:
1. Remove the 4 strap mylars (A) at the corner of the device
2. Align the strap bracket (B) with the notch facing out.
3. Mount on the corner bracket with 2 small screws in place. please repeat this
procedure on the others.
Rotating Hand Strap
4
4. Buckle the steel loop (C) of rotating strap to the corner bracket, there are 4
places to buckle.
5. Adjust and tighten the strap.
Rotating Hand Strap
5
6. Insert your hand to (D) part of the rotating strap.
7. Fix the rotating strap firmly so that the tablet does not come off, and then
turn it over.
Twinhead International Corp.
11F, No.550, Ruiguang Rd., Neihu, Taipei 11492, Taiwan, R.O.C.
/