Kellfri 28-V+ is a generously sized trailer with rubber balloon wheels and a 250 x 100 cm loading area. The floor is 50 cm from the ground and is made of mesh pattern so that material does not get caught on the floor. It has an impact-resistant surface through hammerlack. The tow bar has a handle and hitch for a 50 mm ball coupling allowing the trailer to be pulled both by towing vehicles or by hand. There is a 50 mm ball coupling at the back of the trailer to connect more trailers if and when the need arises.
Kellfri 28-V+ is a generously sized trailer with rubber balloon wheels and a 250 x 100 cm loading area. The floor is 50 cm from the ground and is made of mesh pattern so that material does not get caught on the floor. It has an impact-resistant surface through hammerlack. The tow bar has a handle and hitch for a 50 mm ball coupling allowing the trailer to be pulled both by towing vehicles or by hand. There is a 50 mm ball coupling at the back of the trailer to connect more trailers if and when the need arises.
Read this manual carefully
before using the product!
Translated from the original
28 V+
POLE RACK TRAILER PLUS
Table of contents
CONTENTS
Introduction 3
Product information 3
Intended use 3
Safety instructions 4
Instruction for emergencies 5
Personal protective equipment 5
Warning decals 5
Symbol 5
Surroundings 6
Before use 6
Connecting the trailer 6
Operating the machine 7
Transport and storing 7
Maintenance and service 7
Assembly - trailer 8-10
Complaint form 11
Warranty terms and conditions 12
EC-declaration of conformity, original 12
3
Table of contents
INTRODUCTION
Thank you for choosing a product from Kellfri AB. By following the general safety information,
instruction manual and common sense, you will get many years of enjoyable use of the prod-
uct. Kellfri’s tools and machines are aimed for farmers with high demands on functionality.
PRODUCT INFORMATION
Generously sized trailer with rubber balloon wheels and 250 x 100 cm loading area, oor is 50
cm from ground.
The oor is made of mesh pattern so that material does not get caught on the oor. Impact
resistant surface through hammarlack.
The tow bar has a handle and hitch for a 50 mm ball coupling allowing the trailer to be pulled
both by towing vehicles or by hand. There is a 50 mm ball coupling at the back of the trailer to
connect more trailers if and when the need arises.
The trailer can be supplemented with Kellfri’s galvanised pole rack, which gives you a versatile
solution for both transport and storage of jump equipment!
INTENDED USE
Trailer entended to transport lighter materials such as poles for horse jumps.
28VBS+
Trailer with jump racks Technical Specications
Floor dimensions 2,500 x 1,000 mm
Floor height from the ground 500 mm
L x W x H 4000 x 1000 x 500 mm
Coupling 50 mm
Wheels 16x 6.5-8
Weight 102 kg
Table of contents
SAFETY INSTRUCTIONS
Before using the equipment or product, and for the safety of yourself and others, you must
read the safety instructions and the instruction manual and understand its contents. Always
keep the safety instructions and instruction manual handy for users of the equipment or prod-
uct. For the safety of both yourself and others, it may be a good idea to read through the safety
instructions every now and then. If the safety instructions or instruction manual gets dam-
aged or in any other way cannot be used, new copies may be ordered from:
Kellfri AB, Munkatorpsgatan 6, 532 37 SKARA
Sweden. Tel.: +46 (0)511 242 50 (Pls. contact the retailer) https://www.kellfri.co.uk/
Do not use the equipment or product if you feel ill, tired or are under the inuence of alcohol.
Do not use the equipment or product if you are taking prescribed medication or drugs.
Always comply with general rules of the road and applicable rules stipulated by your country’s
Protection of Animals Act. People under the age of 15 are not allowed to use the equipment.
• Read the trailers instruction manual. Always check combination and performance of the
towing vihecle and trailer to be used to ensure safety during operation. Always inspect
the trailer before each use
• Take caution during transport and always follow the trac rules. Make sure the towing
vehicle has enough weight on the front for safe driving. Avoid sudden movements or
sharp turns. Always adapt the driving speed hilst driving maximum speed10km / h. Never
overload the trailer!
• When servicing, place the implement on a hard and at surface.
• Only those driving may be in the vicinity of the trailer whilst driving.
• The trailer is not made for transporting humans or animals. Do not let anyone ride on the
trailer!
• The trailers movement is operated from the driver’s eat of the towing vehicle.
• Risk area 5 meters.
• Be sure to secure the wheels if the trailer is parked on a slope.
• Make sure that the trailer is securely attached on the towing vehicle before driving. Check
all bolts and tighten if necessary.
• The poles can slide from the racks when driving up or down a hill or a slope. It is the
driver’s responsibility to ensure that the load secured and can not slip whilst driving.
• When detaching the trailer, it must be done on at surfaces and the wheels of the trailer
shall be secured with appropriate brake pads.
DANGER!
IMPORTANT!
When transporting poles, this must be secured! Make sure the poles can not
slide from the racks! Maximum speed during transport is 10 km /h.
Warning!
For security to be met, the product should be used only in the manner
prescribed in this instruction. User is responsible for the instruction is
read through and followed.
5
Table of contents
INSTRUCTION FOR EMERGENCIES
In case of an emergency please dial 112.
Keep cell phone or emergency phone available specially when working alone. First aid kit and
re extinguishers must be kept easily accesable during all work, maintenance and service.To
stop winch movements, release the starter cord.
rvice.
To stop the trailers movement, stop the towing vehicle.
PERSONAL PROTECTIVE EQUIPMENT
Wear suitable clothing and footwear. Do not wear loose clothing or jewelry when working with
the equipment. Remember to put up long hair when working with equipment that rotates.
WARNING DECALS
Make sure that the warning labels are always visible, clean the warning labels if necessary. Do
not wash with high pressure washer directly on the warning label. If any part of the decal is
worn or label becomes frayed or otherwise unreadable, order new decals.
SYMBOL
EXPLANATION
Read the instruction manual carefully before using
this product!
WARNING! Risk of accident!
Danger Zone 5m
WARNING! No one is allowed to stand under sus-
pended load!
WARNING! Risk of pinching!/crushing of bodyp-
arts
The product is CE-marked
Table of contents
SURROUNDINGS
Check and make sure that the area is clear of people, children and objects before switching on
or using the equipment. Risk of serious personal injury.
Be especially careful if children are in the area where the equipment is being use or stored.
Check that there are no low-hanging power lines within the work area. Be careful when work-
ing on slopes and near ditches.
Always work alone with equipment designed for single - purpose tools/products. Never have
junk/debris lying in your work area. Have workspaces clean. Always respect the risk zone.
DANGER!
Children in the area should be supervised
BEFORE USE
Read the instruction manual carefully. Be sure that you understand the safety information, in-
struction manual and warning labels. Use common sense when using and use the appropriate
personal protective equipment.
Always check the performance of the machine combination to be used. Importantly, these
harmonize and match in a satisfactory manner. This is to ensure the implement function and
your and others’ safety.
Visually inspect the gear or the product before use. Fix or replace damaged and worn parts
immediately to reduce the risk of injury. Lubricate moving parts and check that all screw-nuts
and bolts are tightened. Clearing when necessary.
Learn and remember the correct working methods. Beginners should always keep a low
speed, use extreme caution before routine and product knowledge is achieved. The user/cus-
tomer is responsible to handle the situation correctly. The product should not be taken into
use unless it can be done in a safe way for the user.
CONNECTING THE TRAILER
• Check that the trailer is not damaged before connecting it to the vehicle.
• Attach the trailer to the towing vehicle (e.g. ATV). Lock it in place make sure it cannot
come loose
• Drive and check the trailers movement.
Never use faulty safety equipments!
Warning!
7
Table of contents
OPERATING THE MACHINE
Only people who understand the safety information and instructions in this manual may oper-
ate the equipment. Be alert and careful when working with the trailer and only use the quip-
ment or product in the manner described in this manual. When working with equipment that
has moving parts, there is always the risk of injury. Always work alone with the equipment that
are dened as single purpose tools. Respect the equipment’s danger zone.
• Secure poles or other materilas that are transported on the trailer
• Reduce speed at work when driving on slopes and or uneven terrain.
• Maneuvering takes place from the towing vehicles driver’s seat.
• Maximum speed when driving is 10 km / h.
TRANSPORT AND STORING
Make sure there are no people, children and foreign objects around the area before transport-
ing the machine. Always take an extra caution during the transport. Ensure that the product
is well secured and that transport brackets are mounted. Always place the load as low as pos-
sible. Respect the danger zone even during transport. When lifting the equipment, never go
underneath suspended loads. Trailer used for transport should have working brakes.
Always store the machine in a dry place preferably underneath a cover when not in use. Ensure
that the product is stable and not likely to tip over. Never let children play where the machine
is being stored. Always keep in mind the risk of tipping!
MAINTENANCE AND SERVICE
Ensure that the unit is stable and cannot tip over during maintenance and service. Replace
damaged or worn parts immediately to reduce the risk of abrasion. Always perform mainte-
nance, service and inspection, as recommended. Use only original replacement parts or spare
parts with equivalent performance to reduce the risk of damage. All repairs and connections
with electricity must be performed by an authorized person.
Check wheel bolts regularly. Tighten if necessary.
• Regularly check the condition of the trailer and the racks before failure is a fact. When
cracks, twisting, bending, glitches or fatigue of parts are discovered, stop the operation
and rectify the error. Worn parts shall be replaced. Disconnect the machine from the ve-
hicle when repairing faults.
• Rinse the trailer with water if necessary.
Table of contents
ASSEMBLY TRAILER
Prepare all parts:
Trailer chassis: divided into 2 parts, this parts hall be connected and secures with bolts
Metal tube: 1 pcs for assembling of trailer chassis
Towing bar: divided into 2 pieces; drawbar part 1 joints mounted under the trolley + a prole
for joining wheels, part 2 tie rod with ow coupling
Wheels: 4 pcs
Assembling kit :
4pcs M16 Lock nut - for the wheels
1pcs M10X110 mm - assembling av tow bar
8pcs M10x 65 mm - for the assembly of the chassis
3pcs M10x 45mm - assembling of tie rod behind the tow bar
1st M10x55 - for tow bar part2
Check so that all parts are available upon delivery
It is recommended that assembly be carried out by 2 persons due to its weight.
9
Table of contents
1. Turn the front of the carriage chassis upside down to for easier assembly of the wheels and
drawbar part 1, see pictures below:
3st - Bolt M10x45mm + washer and lock nut
1st - Bolt M10x110mm + washer and lock nut
2st - Wheel nut M16
8st - M10x 65 + washer and nuts
2st - wheelnuts M16
2. Mount the wheels on the rear part of the trailers chassis and then turn both parts side-
ways for easier assembly. The parts are connected together with a square tubes, secured
with bolts.
Table of contents
4st - Bolt M10x110mm + washer and lock nut
4st - Bolt M10x65 mm + washer and lock nut
4. Mount he tow bar (part 2 with the coupling)
5. Check all bolts and tighten, do not forget to lubricate wheel bearings.
1st - Bolt M10x65 mm + washer and lock nuts
3. NOTE! THIS IS OPTIONAL! (CONTINUE TO STEP 4) Turn the trailer up right and mount
the pole racks on the front and on the back of the atbed as shown in the picture.
11
Table of contents
KELLFRI AB
Munkatorpsgatan 6
SE-532 37 SKARA
Phone: +46 (0)511-242 50
Fax. +46 (0)511-168 33
Web
www.kellfri.se
E-mail
Utgåva: 2014-01-01
We are grateful for your help pointing out any inaccuracies in the Kellfri product delivered to you. Before making a complaint
read Kellfris general warranty and sales conditions in our catalog as well as the enclosed User’s manual that comes with the
machine.
Please ll in the details below and attach photo and other information in order to process your request.
Buyer: Customer number:
Adress: Invoice number:
E-mail: Phone nr:
Defect product / part:
Problem description:
Describe the sequence of events:
Other:
Submit Complaint form and photo to:
Kellfri AB
Division of Services : Contact Kellfri retailer
Or e-mail service.
Signiture: Date:
When was the product delivered? When was the product taken into
operation?
Did the product functioned as it should
upon the rst operation?
COMPLAINT FORM
KELLFRI AB
Phone no: +46 (0)511 - 242 50
Fax: +46 (0)511 - 168 33
E-post: [email protected]
Tina Baudtler, VD 2013-11-26
Latest update: 08.2018
WARRANTY TERMS AND CONDITIONS
Validity of the warranty - Kelifri’s Warranty is valid 12 months from the date of purchase.
This warranty replaces - Compensation for spare parts after acknowledgment that the
fault lies on the material or manufacturing defects.
This guarantee do not
cover
• Labour costs
• Travel expenses
• Any modification that the buyer himself has/had made.
• Any consequential damages that occurred due to damage to the machine.
• Damage due to normal deterioration of the machine, inadequate: service,
user inexperience or use of spare parts which are not original.
• Wear parts such as hoses, seals, oils, and mechanical belts
According to 2006/42/EC, Annex 2A
Kellfri AB
Munkatorpsgatan 6
532 37 Skara, Sweden
Declares that the machine
Name: 28-V+
Type: Pole Rack Trailer Plus
Complies with all applicable provisions of the Machinery Directive 2006/42/EC.
Other equipment must meet the hardware requirements of the Directive.
CUSTOMER SERVICE
You are always welcome to give your feedbacks, reviews or ask us about our equipment and products.
Kellfri AB is constantly working on further developing their products and therefore reserves the right to
modify, among other things the design and appearance without further notice.
EC-DECLARATION OF CONFORMITY, ORIGINAL
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Kellfri 28-V+ is a generously sized trailer with rubber balloon wheels and a 250 x 100 cm loading area. The floor is 50 cm from the ground and is made of mesh pattern so that material does not get caught on the floor. It has an impact-resistant surface through hammerlack. The tow bar has a handle and hitch for a 50 mm ball coupling allowing the trailer to be pulled both by towing vehicles or by hand. There is a 50 mm ball coupling at the back of the trailer to connect more trailers if and when the need arises.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Kellfri 28-VBS+ Owner's manual
-
Kellfri 27-V18ATV Owner's manual
-
Kellfri 16-PGF2000 Owner's manual
-
Kellfri 28-CVB Owner's manual
-
Kellfri 23-DATV Owner's manual
-
Kellfri 21-SV20.101 Owner's manual
-
Kellfri 21-KGR21 Owner's manual
-
Kellfri 23-VV800 Owner's manual
-
Kellfri 34-FHBTN Owner's manual
-
Kellfri 35-SKL145 User manual
Other documents
-
MQ Multiquip Trailers Operating instructions
-
MQ Multiquip Trailers Operating instructions
-
MQ Multiquip WT5HP/WTE5HP Operating instructions
-
MQ Multiquip MLT25-series User manual
-
MQ Multiquip MLT20DCA User manual
-
MQ Multiquip WT5HP Series Operating instructions
-
MQ Multiquip LT6K Operating instructions
-
MQ Multiquip LT6K5 Operating instructions
-
MQ Multiquip WT5C Series Operating instructions
-
MQ Multiquip GBX24BK Operating instructions
