aspenhome ICB-463-BCH Assembly Instructions

aspenhome
Brand
aspenhome
Model
ICB-463-BCH
Type
Assembly Instructions

This manual is also suitable for

10-26-2017
Page 1/2
ITEM NO: ICB-463-BCH/BLK/EGG/GRY Chesser Mirror
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
aspenhome RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
FOR INDOOR USE ONLY
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
HARDWARE LIST:
No. Description Sketch Quantity
A Bolt Ø1/4"*1-1/4" 8 PCS
B Lock Washer Ø1/4" 8 PCS
C Flat Washer Ø1/4" *3/4" 8 PCS
D Allen Wrench 4mm 1 PC
COMPONENTS LIST:
No. Description Sketch Quantity
1 Mirror 1 PC
2 Wood Strip 2 PCS
Option 1: Wall Mount
A (Portrait) B (Landscape)
ICB-463
Option 2: Dresser/Chesser Mount
ICB-463 ICB-463
ICB-454 ICB-455
10-26-2017
Page 2/2
aspenhome RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
ITEM NO: ICB-463-BCH/BLK/EGG/GRY Chesser Mirror
FOR OPTION 1 (Wall Mount)
STEP 1: The mirror is pre-assembled with the wire in position to hang the mirror in landscape
orientation as shown in Diagram B. If you refer to hang the mirror in portrait orientation, remove the
wire using a screwdriver (not included) and attach the wire as shown in Diagram A.
STEP 2: After attaching nail/hanger to wall, place wire over nail/hanger and slowly lower the mirror
into place. Make sure the wire catches on the nail/hanger.
Note: Ensure the nail/hanger is in a wall stud or wall solid enough to support mirror.
Wire for A
A (Portrait) B (Landscape) Wire for B
FOR OPTION 2 (Dresser/Chesser Mount)
STEP 1: Attach the wood strips to the dresser by using 4 bolts(A), lock washers(B), and flat washers(C). Do not tighten
bolts completely.
Note: Use inside threaded inserts for position A (portrait) and outside threaded inserts for position B (landscape).
Wood Strip
A
B
C
Wood Strip
D
Dresser/Chesser Back
STEP 2: Attach the wood strips to the mirror by using 4 bolts(A), lock washers(B), and flat
washers(C). Tighten all bolts on dresser and mirror with Allen wrench.
Mirror Back Wood Strip
A
B
C
D
Dresser/Chesser Back
Mirror Back
Dresser/Chesser Back
For ICB-462
For B
For A
  • Page 1 1
  • Page 2 2

aspenhome ICB-463-BCH Assembly Instructions

aspenhome
Brand
aspenhome
Model
ICB-463-BCH
Type
Assembly Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents