2. Living Spaces
  3. RNMR-03-65

Living Spaces RNMR-03-65 User manual

  • Hello! I've reviewed the assembly instructions for the Reagan Mirror RNMR-03-65. This document provides a parts list, hardware list and step by step instructions for assembling the mirror and attaching it to a dresser. A Phillips head screwdriver is required for the assembly. I'm ready to assist you with any questions you might have about the assembly process or the included parts.
  • What tool is required for the assembly?
    What size screws should be used to attach the supports to the mirror?
    What size screws should be used to attach the mirror to the dresser?
Reagan Mirror
Assembly Instrucons
Please make sure to check all packaging materials carefully for small hardware
that may have come loose inside the carton during shipment. Refer to the chart
above to ensure you have all the parts before assembling.
We recommend assembling your piece on carpet, area rug or oor padding to
reduce the likelihood of your furniture being damaged.
RNMR-03-65
No Item Qty
1Screws 6x1-1/4
Aaching Supports to Mirror 4
2Screws 6x1-1/2
Aaching Mirror to Dresser 4
No Item Qty
1 Mirror 1
2Support
Brackets 2
PARTS LIST HARDWARE LIST
TOOLS REQUIRED (not provided)
1. Phillips head screwdriver
www.livingspaces.com • 1-877-266-7300
Use only the screws included in the package. Using dierent
sizes could cause the wood to split or come out.
www.livingspaces.com • 1-877-266-7300
STEP 1
Position the mirror frame face down on a carpeted oor and position the wood supports on the back of the
mirror frame so that half of the wood support is below the post. Use the 6 x 1-1/4 screws.
STEP 2
Place mirror frame on dresser and center the mirror on the dresser top.
STEP 3
Attach the mirror frame assembly using the 6 x 1-1/2 wood screws. The mirror is now attached.
/