aspenhome I349-464-WST Assembly Instructions

Type
Assembly Instructions
Page 1/2
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
ITEM NO: I349-464-WST Round Mirror w/ Metal Base
COMPONENTS LIST:
No. Description Sketch Quantity
1 Mirror 1 PC
2 Metal Base 1 PC
HARDWARE LIST:
2 PCS
1 PC
No.
A
B
C
D
E
Description Sketch Quantity
Bolt Ø1/4" x 3/4" (20)
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 5/8"
Allen Wrench M4
Option 1: Wall Mount
Option 2: Dresser Mount
2 PCS
2 PCS
F Metal Plate
Wood Screw #4x1-1/4" 2 PCS
8 PCS
06-06-2022
Page 2/2
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
FOR OPTION 1 (Wall Mount)
STEP 1: Position the metal base on the dresser.
Attach the metal plates(E) to the back of dresser
with wood screws(F) as shown below.
FOR OPTION 2 (Dresser Mount)
STEP 1: After attaching nail/hanger to wall, place wire
over nail/hanger and slowly lower the mirror into place.
Make sure the wire catches on the nail/hanger.
Note: Ensure the nail/hanger is in a wall stud or wall solid
enough to support mirror.
Wire
ITEM NO: I349-464-WST Round Mirror w/ Metal Base
Dresser Back
Metal Plate
Wood Screw
Dresser Back
STEP 2: Attach the mirror to the metal base
by using 2 bolts(A), lock washers(B), and flat
washers(C). Completely tighten all bolts. Mirror
B
CAD
Metal Base
06-06-2022
Metal Base
  • Page 1 1
  • Page 2 2

aspenhome I349-464-WST Assembly Instructions

Type
Assembly Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI