aspenhome I356-6640S-BRB Assembly Instructions

  • Hello! I'm a chat assistant, and I've reviewed the assembly instructions for the aspenhome Dining Side Chair I356-6640S-BRB. This document contains a full list of the components and hardware needed for assembly, and guides you through each stage of assembly by step-by-step instructions. I'm ready to answer your questions about the assembly process or the chair itself.
  • What tools are required for assembly?
    What are the main components of the chair?
    What is included in the hardware list?
Page 1/2
ITEM NO: I356-6640S-BRB Dining Side Chair w/ Uph Seat (2/Ctn)
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN MALAYSIA
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
FUNCTIONALITY INSTRUCTION
HARDWARE LIST:
No.
B
C
D
Description Sketch Quantity
Spring Washer 1/4"
Flat Washer 1/4" x 3/4"
Spanner
A
COMPONENTS LIST:
No.
1Description Sketch Quantity
2 Chair Seat
3
1 PC
1 PC
1 PC
Left Front Leg
E
Hex. Bolt M6 x 3-1/8"
10 PCS
10 PCS
Chair Back
F
2 PCS
4 PCS
4 PCS
4 Left Side Stretcher
G4 PCS
PHRS Screw #8 x 1-1/4"
5
Right Front Leg 1 PC
1 PC
1 PC
1 PC
6 Right Side Stretcher
Hex. Bolt M6 x 2-3/8"
Hex. Bolt M6 x 1-9/16"
12-13-2021
Page 2/2
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN MALAYSIA
ah
Right Front Leg
STEP 2: Attach the left front leg and right
front leg to chair seat by using 4 bolts(B),
lock washers(D), flat washers(E), Do not
tighten bolts until STEP 3.
Chair Seat
Right Front Leg
B
D
E
Chair Seat
Chair Back
D
E
D
E
A
C
STEP 3: Attach the left side stretcher and right
side stretcher to the front legs and chair back
with wood screws(G). Completely tighten all
wood screws and bolts. Turn the assembled
chair to the upright position.
G
G
Left Front Leg
Left Side Stretcher
Right Side Stretcher
STEP 1: Attach the chair seat to chair back by using 4
bolts(A), 2 bolts(C), 6 lock washers(D), 6 flat washers(E)
with a spanner(F), Do not completely tighten bolts.
12-13-2021
/