Winners Only DQT145224W Assembly Instructions

Brand: Winners Only

Model: DQT145224W

Type: Assembly Instructions

ALR-10255D-SHM Page 1 of 2 MADE IN MALAYSIA

PART NO FIGURE DESCRIPTION Q'TY

Wood Seat

Chair Back

PARTS LIST

1 Pce

Seat Frame 1 Pce

1 Pce

Hardware Bag

DQT145224-01

DQT145224-02

DQT145224-03

DQT145224-04

DQT145224-05 Front Leg (Right)

1 Pce

DQT145224-06 Front Leg (Left)

RAKE BACK BARSTOOL

DQT145224

DQT145224-02

DQT145224-03 DQT145224-04

DQT145224-05

DQT145224-06

DQT145224-10

DQT145224-07

1 Pce

DQT145224-10 Front Stretcher (Short)

2 Pcs

DQT145224-07 Side Stretcher (Right / Left)

ALR-10255D-SHM MADE IN MALAYSIA

Page 2 of 2

RAKE BACK BARSTOOL

Turn the chair upright. Check its balance and tighten all screws and bolts to complete the assembly.

STEP 3

HARDWARE PARTS:

JCBC Bolt

(Short)

2 pcs

Pan Head

Screw

6 pcs JCBC Bolt

(Long)

8 pcs Lock Washer

10 pcs Flat Washer

10 pcs Allen Key

1 pce Glue

1 pce

ASSEMBLY:

1. Position the chair back on a soft surface such as a carpet. Place the box system assembly (Hardseat is pre-attached to the seat

frame in assembly) on to the middle rail of the chair back with the dowel fully inserted into the pre-drilled hole.

1.1. Insert JCBC Bolt (Long) through a Lock Washer and a Flat Washer into the pre-drilled holes on the apron frame at rear corners.

1.2. Insert the JCBC Bolt (Short) through a Lock Washer and a Flat Washer into the pre-drilled holes on the apron frame at rear rail.

2. Apply Glue to all the pre-drilled holes before attaching all stretchers. Insert each side stretcher into pre-drilled holes on both of the

rear legs, make sure that screw holes on the stretcher are facing down. Insert the front stretcher into the pre-drilled holes on the front

legs. Place the assembled front legs to corner block of the frame, and insert side stretcher into the legs.

2.1. Insert the JCBC Bolt (Long) through a Lock Washer, a Flat Washer and the pre-drilled holes of corner block into the pre-drilled holes

on the front leg, tighten the JCBC Bolt with Allen Key provided. But do not fully tighten the bolts yet.

2.2. Insert Pan Head Screw into front stretcher and side stretcher through the pre-drilled holes, tighten with screw driver. (Not Provided)

Chair Back

Dowel

STEP 1

(Fig 1)

Allen Key

JCBC Bolt(Long)

Lock Washer

Flat Washer

Allen Key

JCBC Bolt(Short)

Lock Washer

Flat Washer

(Fig.1.1)

(Fig.1.2)

Box

System

Assembly

Flat Washer

Lock Washer

JCBC Bolt (Long)

Allen Key

(Fig.2.1)

STEP 2

Apply Glue and insert stretcher

with screw holes facing down.

DQT145224

CARE INSTRUCTION

~ Be sure to use the same type of polish consistenly.

Your furniture will appear cloudy or streaky if oil

based or wax based polishes are interchanged.

~ Spray your furniture surface evenly. Wipe in a

circular motion with a soft clean cloth.

Left Leg

Left & Right

Side Stretcher

Right Leg

Front

Stretcher

(Fig.2.2)

Pan Head Screw

(Fig 2)

Apply Glue

Winners Only DQT145224W Assembly Instructions

Winners Only DQT145224W Assembly Instructions

Winners Only DQT145224W Assembly Instructions

Related papers

Other documents