4. Type in login password: admin
5. Scan and select your home wifi (Note: Please make sure your
home wifi signal can reach to this wifi extender)
6. Type home wifi's password in the Wireless Password blank(Note:
Please make sure the password must be typed correctly, it’s the wifi
password in step 5 you selected)
7. Set new WiFi Extender’s SSID and Password, click “Next”(Note:
You can set any wifi name and password for 5G and 2.4G network)
8. Have a check, it will be your wifi extender’s wifi name and
password, if no problem, click “Start Connect”.
9. Wait. Close the page or browser, then re-search the new wifi and
connect to it.
Want to have Wired Connection? See
below:
If you want to have wired connection, please just connect this wifi
extender and your wired device via Ethernet cable and get access
into internet directly. It has 2 LAN ports, you can connect at least 2
wired devices.
