2. Burkert
  3. 8692
8692

Burkert 8692, 8693 User manual

  • Hello! I am an AI chatbot trained to assist you with the Burkert 8692 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Quickstart
Type 8692, 8693
Positioner and process controller
Positioner und Prozessregler
Positionneur et régulateur de process
We reserve the right to make technical changes without notice.
Technische Änderungen vorbehalten.
Sous réserve de modications techniques.
© Bürkert Werke GmbH & Co. KG, 2008 - 2021
Quickstart 2107/08_EU-ML_00805803 / Original DE
3
1 QUICKSTART GUIDE ............................................................ 4
1.1 Denitionoftheterm'Device' ..................................... 4
1.2 Symbols ....................................................................... 5
2 AUTHORIZED USE ............................................................... 5
3 BASIC SAFETY INSTRUCTIONS .......................................... 6
4 GENERAL INFORMATION .................................................... 7
4.1 Contact address .......................................................... 7
4.2 Warranty ...................................................................... 7
4.3 InformationontheInternet .......................................... 7
5 SYSTEM DESCRIPTION ....................................................... 7
5.1 Functions ..................................................................... 8
6 TECHNICAL DATA ................................................................. 9
6.1 Conformity ................................................................... 9
6.2 Standards .................................................................... 9
6.3 Licenses ...................................................................... 9
6.4 Operating conditions ................................................... 9
6.5 Rating plate ................................................................ 9
6.6 Mechanicaldata ........................................................ 10
6.7 Pneumaticdata ......................................................... 10
6.8 Electrical data ............................................................ 11
7 OPERATION ........................................................................ 12
7.1 Descriptionoftheoperatinganddisplayelements ... 12
7.2 Functionofthekeys ..................................................... 13
8 OPERATING STATES .......................................................... 14
8.1 Changingtheoperatingstate .................................... 14
8.2 DisplaysintheAUTOMATICoperatingstate ............... 14
8.3 Master code .............................................................. 15
9 OPERATING LEVELS .......................................................... 16
9.1 Switchingbetweentheoperatinglevels .................... 16
10 INSTALLATION .................................................................... 16
10.1 InstallationofdevicesfortheExarea............................. 16
10.2 Safetyinstructions ..................................................... 16
10.3 Installationonprocessvalves,types2103,2300and
2301 ................................................................................. 17
10.4 Installationonprocessvalves,series26xxand27xx .... 18
10.5 Pneumaticconnection ............................................... 20
11 ELECTRICAL INSTALLATION ............................................. 21
11.1 Safetyinstructions ..................................................... 21
11.2 Electricalinstallationwithcircularplug-inconnector 22
11.3 Electricalinstallationwithcablegland ...................... 27
11.4 Electricalinstallationofuidquantitycontroller
 Type8750 .................................................................. 28
12 PROFIBUS DP / DEVICENET ............................................. 28
12.1 Electrical installation .................................................. 28
13 START-UP ............................................................................ 31
13.1 Safetyinstructions ..................................................... 31
13.2 Starting-upType8692 ............................................... 31
13.3 Starting-upType8693 .............................................. 33
14 SAFETY END POSITIONS .................................................. 35
15 DISASSEMBLY OF TYPE 8692/8693 .................................. 36
Contents
Type 8692, 8693
English
4
Quickstart guide
Type 8692, 8693
1 QUICKSTART GUIDE
Thequickstartguidecontainsthemostimportantinformationand
notesregardingtheuseofthedevice.Adetaileddescriptioncan
befoundintheoperatinginstructionsforType8692/8693.
Keepthequickstartguideinalocationwhichiseasilyaccessibleto
everyuserandmakeitavailabletoeverynewownerofthedevice.
Important Safety Information!
ReadQuickstartcarefullyandthoroughly.Studyinparticular
thechaptersentitled"Basicsafetyinstructions",and"Autho-
rized use".
▶Quickstartmustbereadandunderstood.
The operating instructions can be found the Internet at:
www.burkert.com
1.1 Denition of the term 'Device'
Intheseinstructions,theterm"device"alwaysreferstothe
Type8692,8693.
15.1 Disconnectingthepneumaticconnections ............... 36
15.2 Disconnecting electrical connections........................ 37
15.3 RemovingType8692/8693 ........................................ 37
16 ACCESSORIES ................................................................... 38
16.1 Communicationssoftware......................................... 38
16.2 USBinterface ............................................................ 38
16.3 Download .................................................................. 38
17 TRANSPORT, STORAGE, DISPOSAL ................................. 38
English
5
Authorized use
Type 8692, 8693
2 AUTHORIZED USE
Non-authorized use of the positioner Type 8692 and the
process controller Type 8693 can be dangerous to people,
nearby equipment and the environment.
Thedeviceisdesignedtobemountedonpneumaticactuators
ofprocessvalvesforthecontrolofmedia.
▶In a potentially explosive atmosphere, Type 8692 and 8693
maybeusedonlyinaccordancewiththespecicationonthe
separateExtypelabel.Fortheuse,observetheATEXmanual
withsafetyinstructionsfortheExarea.
▶DeviceswithoutaseparateExtypelabelmaynotbeusedina
potentiallyexplosiveatmosphere.
▶Donotexposethedevicetodirectsunlight.
▶Apulsatingdirectvoltage(rectiedalternatingvoltagewithout
smoothing)mustnotbeusedastheoperatingvoltage.
▶Useaccordingtotheauthorizeddata,operatingconditions,and
conditionsofusespeciedinthecontractdocumentsandoper-
atinginstructions.ThesearedescribedinChapter"6Technical
data".
▶Usethedeviceonlyinconjunctionwiththird-partydevices
andcomponentsrecommendedandauthorizedbyBürkert.
▶Inviewofthelargenumberofoptionsforuse,beforeinstal-
lation,itisessentialtostudyandifnecessarytotestwhether
thedeviceissuitablefortheactualuseplanned.
▶Correcttransportation,storageandinstallation,aswellascareful
useandmaintenanceareessentialforreliableandfaultless
operation.
▶UseType8692and8693onlyasintended.
1.2 Symbols
Thefollowingsymbolsareusedintheseinstructions.
DANGER!
Warns of an immediate danger!
▶Failuretoobservethewarningwillresultinafatalorserious
injury.
WARNING!
Warns of a potentially dangerous situation!
▶Failuretoobservethewarningmayresultinseriousinjuries
ordeath.
CAUTION!
Warns of a possible danger!
▶Failuretoobservethis warningmayresultina moderateor
minorinjury.
NOTE!
Warns of damage to property!
Importanttipsandrecommendations.
Referstoinformationintheseoperatinginstructionsorin
otherdocumentation.
→Designatesaprocedurewhichyoumustcarryout.
English
6
Basic safety instructions
Type 8692, 8693
3 BASIC SAFETY INSTRUCTIONS
Thesesafetyinstructionsdonotmakeallowanceforany
•Contingenciesandeventswhichmayariseduringtheassembly,
operation,andmaintenanceofthedevices.
•Localsafetyregulations–theoperatorisresponsibleforobserving
theseregulations,alsoinrelationtotheinstallationpersonnel.
Risk of injury from high pressure in the system/device.
▶Beforeworkingonthesystemordevice,switchothepres-
sureandvent/drainlines.
Risk of electric shock!
▶Beforereachingintothedeviceortheequipment,switcho
thepowersupplyandsecuretopreventreactivation.
▶Observeapplicableaccidentpreventionandsafetyregula-
tionsforelectricalequipment.
General hazardous situations.
Topreventinjuries:
▶Ensurethatthesystemcannotbeactivatedunintentionally.
▶Thedevicemustonlybeoperatedwheninaperfectcondi-
tionandinconsiderationoftheoperatinginstructions.
▶Installationandmaintenanceworkmaybecarriedoutonly
byauthorizedtechnicianswiththeappropriatetools.
▶Afteraninterruptionintheelectricalorpneumaticsupply,
ensurethattheprocessisrestartedinadenedorcontrolled
manner.
▶Thegeneralrulesoftechnologymustbeobservedforappli-
cationplanningandoperationofthedevice.
Topreventdamagetothedevice:
▶Whenunscrewingandscrewingthehousingjacket
(withtransparentcap)in,donotholdtheactuatorbutthe
electricalconnectionhousingofType8692/8693.
▶Donotsupplythepilotairportwithaggressiveorammable
mediaoruids.
▶Donotphysicallystressthehousing(e.g.byplacingobjects
onitorstandingonit).
▶Donotmakeanyexternalalterationstothehousingofthe
device.Donotpainthousingpartsorscrews.
NOTE!
Electrostatic sensitive components/modules!
Thedevicecontainselectroniccomponentswhichreactsen-
sitivelytoelectrostaticdischarge(ESD).Contactwithelectro-
staticallychargedpersonsorobjectsarehazardoustothese
components.Intheworstcasescenario,theywillbedestroyed
immediatelyorwillfailafterstart-up.
•ObservetherequirementsinaccordancewithDINEN
61340-5-1tominimizeoravoidthepossibilityofdamage
causedbysuddenelectrostaticdischarge!
•Donottouchelectroniccomponentswhiletheoperatingvoltage
isswitchedon!
English
7
System description
Type 8692, 8693
4 GENERAL INFORMATION
4.1 Contact address
Germany
BürkertFluidControlSystems
Sales Center
Christian-Bürkert-Str.13-17
D-74653Ingelngen
Tel.+49(0)7940-1091111
Fax+49(0)7940-1091448
E-mail:[email protected]
International
Contactaddressescanbefoundonthenalpagesoftheprinted
operating instructions.
AndalsoontheInternetat:
www.burkert.com
4.2 Warranty
The warranty is only valid if the Types 8692/8693 are used as
intendedinaccordancewiththespeciedapplicationconditions.
4.3 Information on the Internet
TheoperatinginstructionsanddatasheetsforTypes8692/8693
canbefoundontheInternetat:
www.burkert.com
5 SYSTEM DESCRIPTION
Positioner or
process controller
(pneumatic)
Actuator
Valvebody
Processvalve
(controlvalve)
Fig. 1: Structure, Type 8692/8693 with process valve
ThepositionerType8692andtheprocesscontrollerType8693are
electropneumaticpositioncontrollersforpneumaticallyactuated
controlvalveswithsingle-actingordouble-actingactuators.
Togetherwiththepneumaticactuatorthepositionerandprocess
controllerformanopticalandfunctionalunit.
Thecontrolvalvesystemscanbeusedforawiderangeofcontrol
tasksinuidtechnologyand,dependingontheapplicationcon-
ditions, dierent process valves from the Bürkert range can be
combinedwiththepositionerortheprocesscontroller.Angleseat
valves,straightseatvalves,controlvalves,diaphragmorballvalves
aresuitable.
English
8
System description
Type 8692, 8693
Pilot air port
(Label:1)
Exhaustairport
(Label:3)
Electricalconnectionhousing
(Connectionoptionwithcircular
plug-inconnector)
Transparentcap
(belowcontrolmodulewithdisplay
andkeys)
Housingjacket
Additionalexhaustairport
(Label:3.1)
onlyforTypes23xxand2103withpilot-controlledcontrol
systemforahighairowratefromactuatorsizeø125/130
Airintakelter
Pressurelimitingvalve
Electricalconnectionhousing
(Connectionoptionwithconnection
terminals)
Fig. 2: Structure Type 8692/8693
5.1 Functions
Type8692-Positioner(positioncontroller)
Thepositionoftheactuator(stroke)isregulatedaccordingtothe
positionset-pointvalue.Thepositionset-pointvaluecanbe
speciedbyanexternalstandardsignal(orviaeldbus).
Type8693-Processcontroller
Theprocesscontrollerislinkedtoacontrolcircuit.Theposition
set-pointvalueofthevalveiscalculatedfromtheprocessset-
pointvalueandtheprocessactualvalueviathecontrolparam-
eters
(PIDcontroller).Theprocessset-pointvaluecanbesetbyan
externalsignal.
English
9
Technical data
Type 8692, 8693
6 TECHNICAL DATA
6.1 Conformity
Types8692/8693conformtotheEUdirectivesaccordingtotheEU
DeclarationofConformity.
6.2 Standards
Theappliedstandardswhichareusedtodemonstratecompliance
withtheEUDirectivesarelistedintheEU-TypeExaminationCer-
ticateand/ortheEUDeclarationofConformity.
6.3 Licenses
Theproductisapprovedforuseinzone2and22inaccordance
withATEXdirective2014/34/EUcategory3GD.
Observeinstructionsonoperationinanexplosion-risk(Ex)
area.ObservetheATEXadditionalinstructions.
TheproductiscULusapproved.InstructionsforuseintheUL
areaseechapter"6.8 Electrical data".
6.4 Operating conditions
WARNING!
Solar radiation and temperature uctuations may cause mal-
functions or leaks.
▶Ifthedeviceisusedoutdoors,donotexposeitunprotected
totheweatherconditions.
▶Thepermittedambienttemperaturemaynotexceedthe
maximumvalueordropbelowtheminimumvalue.
Ambienttemperature:  Thepermittedtemperaturerange
isgivenontheratingplateofthe
device.
Degreeofprotection
Evaluatedbythemanufacturer: EvaluatedbyUL:
IP65/IP67accordingtoEN60529* ULType4xRating
indoor only*
* only if cables, plugs and sockets have been connected correctly and
in compliance with the exhaust air concept (see Chapter "10.5 Pneu-
maticconnection",page20).
Operatingaltitude  upto2000mabovesealevel
Relativeairhumidity  max.90%at55°C(noncondensing)
6.5 Type label
Explanationofthedevice-specicspecicationsonthetypelabel:
Example:
8692-E3-...-0PU02
Single act Pilot 3.0 24V
Pmax7bar
Tamb-10-+55°C
S/N1001
00123456
D-74653Ingelfingen
Identicationnumber;date
ofmanufacture(encoded)
Type;featuresofthetypecodeapplicableto
ULandATEX
Maximumoperating
pressure
Controlfunction;pilotvalve
Supplyvoltagepilotvalve
Bar code
Serialnumber/CEmark
Max.ambienttemperature
W15MA
Fig. 3: Example of type label
English
10
Technical data
Type 8692, 8693
6.5.1 UL additional label
Type4Xenclosure
NECClass2only
Supplyvoltage:24V Supplyvoltagedevice
Circuitwithlimitedpower
Degreeofprotection
Fig. 4: UL additional label (example)
6.6 Mechanical data
Dimensions  seedatasheet
Housingmaterial   outside:PPS,PC,VA,interior:
PA6;ABS
Sealingmaterial  NBR/EPDM
Strokerangevalvespindle 3...45mm
6.7 Pneumatic data
Controlmedium  Neutralgases,air
  QualityclassesasperISO8573-1
 Dustcontent Qualityclass7,
max.particlesize40µm,
max.particledensity10mg/m³
Watercontent  Qualityclass3,
max.pressuredewpoint-20°C
ormin.10°Cbelowthelowestoper-
atingtemperature
Oilcontent QualityclassX: max.25mg/m3
Temperaturerange
controlmedium  0...+50°C
Pressure range
controlmedium  3...7bar
Airowratepilotvalve  7lN/min(foraerationanddeaer-
ation)
(QNn-valueaccordingtodenition
forpressuredropfrom7to6bar
absolute)
optional:130lN/min(foraeration
anddeaeration)(onlysingle-acting
connections)
Connections  Plug-inhoseconnectorø6mm/
  1/4"socketconnectionG1/8
English
11
Technical data
Type 8692, 8693
6.8 Electrical data
WARNING!
OnlycircuitswithlimitedpowermaybeusedforUL
approvedcomponentsaccordingto“NECClass2”.
Protectionclass  IIIasperDINEN61140(VDE0140-1)
Connections  CableglandM16x1.5,SW22
(clampingarea5...10mm)
withconnectionterminalsforcablecross-
sections0.14...1.5mm²(24VDC)or
circularplug-inconnector(M12x1)
(24VDC,PROFIBUSDP,DeviceNet)
Operatingvoltage 24VDC±10%-max.residualripple10%
Powerconsumption <5W
Inputdataforactualvaluesignal
4...20mA: Inputresistance  180 Ω
Resolution  12bit
 Frequency: Measurementrange0...1000Hz
Inputresistance  17kΩ
Resolution  1‰ofmeasurement
 value
Inputsignal  >300mVss
Waveform  sine,square,
triangle
Pt100: Measurementrange -20...+220°C
Resolution  <0.1°C
Measurementcurrent<1mA
Inputdataforset-pointvaluesignal
0/4...20mA: Inputresistance 180Ω
Resolution  12bit
0...5/10V: Inputresistance 19kΩ
Resolution  12bit
Analoguefeedback 
 Max.current 10mA
(forvoltageoutput0...5/10V)
Burden(load)  0...560Ω
(forcurrentoutput0/4...20mA)
Inductive
proximityswitches  100mAcurrentlimitation
Binaryoutputs  galvanicallyisolated,PNP
Currentlimitation  100mA,outputisclockedifoverload
occurs
Binaryinput  galvanicallyisolated,PNP
0...5V=log"0",10...30V=log"1"
invertedinputinreverseorder
(inputcurrent<6mA)
Communication
interface  DirectconnectiontoPCviaUSB
adapterwithintegratedinterfacedriver
Communications
software  Communicator
English
12
Operation
Type 8692, 8693
7 OPERATION
7.1 Description of the operating and
display elements
Operating elements:
Abbreviateddesignationforthe
displayedprocessvalue
Processvalue*
Unitofthedisplayedprocess
value
Designationforthefunctionof
thekeys
Rightselectionkey
Arrowkey ,arrowdown
Arrowkey ,arrowup
Leftselectionkey
Display elements of the process level:
Savesymbol
Symbolforpositioncontrol
Symbolforprocesscontrol
SymbolfortheAUTOMATICoperatingstate
Othersymbolsaredisplayedaccordingtotheactivatedfunc-
tions.Seeoperatinginstructionstype8692/8693
Fig. 5: Display elements of the process level; operating elements
EXIT ENTER
1
MAIN
ACTUATOR
X.TUNE
ADD.FUNCTION
INPUT
Submenu
Designationforthefunction
ofthekeys
Display elements of the
setting level:
Menu designation
Operating elements:
For description see "Fig. 5"
Fig. 6: Display elements of the setting level
Thedisplayisadjustedtothesetfunctionsandoperatinglevels.
Inprinciple,adistinctioncanbemadebetweenthedisplayview
fortheprocesslevelandthesettinglevel.
Whentheoperatingvoltagehasbeenapplied,theprocesslevel
is displayed.
* TheprocessvalueswhichcanbedisplayedintheAUTOMATIC
operating state depend on type.
Adetaileddescriptioncanbefoundintheoperatinginstruc-
tionsforType8692/8693.
English
13
Operation
Type 8692, 8693
7.2 Function of the keys
Thefunctionofthe4keysinthecontrolelddiersdepending
ontheoperatingstate(AUTOMATICorMANUAL)and
operatinglevel(processlevelorsettinglevel).
Thefunctionofthekeysisdisplayedinthegraytexteldwhich
isabovethekey.
Function of the keys on the process level:
Key Function of
the keys
Description of the
function
Operating
state
Arrowkey MENU
OPN
(OPEN)
Manualopeningofthe
actuator MANUAL
Changethedisplayedvalue
(e.g.POS-CMD-TEMP-...) AUTOMATIC
Arrowkey MENU
CLS
(CLOSE)
Manualclosingofthe
actuator MANUAL
Changethedisplayedvalue
(e.g.POS-CMD-TEMP-...) AUTOMATIC
Selection
key
MENU
MENU Changetothesettinglevel
Note:Presskeyfor
approx.3s.
AUTOMATIC
orMANUAL
Selection
key
MENU
AUTO ReturntoAUTOMATIC
operating state MANUAL
MENU
MANUAL ChangetoMANUAL
operating state AUTOMATIC
Function of the keys on the setting level:
Key Function of the
keys Description of the function
Arrowkey Scrollupinthemenus
MENU
+Increasenumericalvalues
Arrowkey Scrolldowninthemenus
MENU
–Decreasenumericalvalues
MENU
←Changebyonedigittotheleft;
whenenteringnumericalvalues
Selection
key
MENU
EXIT (BACK) Returntotheprocesslevel
Graduallyreturnfromasubmenu
option
MENU
ESC Leaveamenu
MENU
STOP Stopasequence
Selection
key
MENU
ENTER
MENU
SELEC
MENU
OK
MENU
INPUT
Select,activateordeactivatea
menuoption
MENU
EXIT (BACK) Graduallyreturnfromasubmenu
option
MENU
RUN Startasequence
MENU
STOP Stopasequence
Tab. 1: Function of the keys
English
14
Operating states
Type 8692, 8693
8 OPERATING STATES
Type8692/8693has2operatingstates:
AUTOMATICandMANUAL.
AUTOMATIC
MENU CMD POS MANU
POS 0.0
IntheAUTOMATICoperatingstate
normalcontrolledoperationis
implemented.
(ThesymbolforAUTOMATIC
isshownonthedisplay.(Abarruns
alongtheupperedgeofthedisplay).
MANUAL
MENU OPN CLS AUTO
POS 0.0
IntheMANUALoperatingstatethe
valvecanbemanuallyopenedor
closedviathearrowkeys (key
function OPN and CLS ).
(ThesymbolforAUTOMATIC
ishidden.Nobarrunningalongthe
upperedgeofthedisplay).
8.1 Changing the operating state
ChangetoMANUALoperating
state
(onlyavailableforprocessvalue
display:POS, CMD, PV, SP)
MANU Press
ReturntoAUTOMATICoperating
state
AUTO Press
8.2 Displays in the AUTOMATIC operating
state
Type 8692 Description of the display Type 8693
MENU
CMD/POS
CMD MANU
POS 0.0
Actualpositionofthevalve
actuator(0...100%)
MENU SP/PV CMD MANU
POS
0.0
MENU POS TEMP MANU
CMD 0.0
Set-pointpositionofthevalve
actuator(0...100%)
MENU POS TEMP MANU
CMD
0.0
MENU CMD
CMD/POS
TEMP
0.0
C
Internaltemperaturein
thehousingofthetype
8692/8693(°C)
MENU CMD PV
TEMP
0.0
C
Processactualvalue
MENU TEMP SP MANU
PV
0.0
m3/min
Processset-pointvalue
MENU PV PV
(t)
INPUT
SP
0.0
m3/min
Simultaneousdisplayofthe
set-pointpositionandthe
actualpositionofthevalve
actuator(0...100%)
MENU
CMD/POS
POS MANU
0.0
SP
PV
0.0
m3/min
m3/min
English
15
Operating states
Type 8692, 8693
Type 8692 Description of the display Type 8693
GraphicaldisplayofSP and
PVwithtimeaxis
MENU HOLD
SP/PV(t)
MENU HOLD
CMD/POS(t)
GraphicaldisplayofPOS
and CMDwithtimeaxis
MENU HOLD
CMD/POS(t)
MENU
CMD/POS
CLOCK
INPUT
4.0
mA
Inputsignalfor
set-pointposition
(0...5/10V/0/4...20mA)
MENU
INPUT X.TUNE
INPUT
12:00
00
Thu. 01 . 09 . 11
CLOCK
Time,weekdayanddate
MENU
POS
(t)
X.TUNE
INPUT
12:00
00
Thu. 01 . 09 . 11
CLOCK
MENU CLOCK
CMD/POS
RUN
X.TUNE
Automaticadjustmentofthe
positioner(positioncontroller)
MENU CLOCK P.TUNE RUN
X.TUNE
Automaticoptimization
oftheprocesscontroller
parameters
MENU X.TUNE P.LIN RUN
P.TUNE
Type 8692 Description of the display Type 8693
Automaticlinearizationofthe
processcharacteristics
MENU P.TUNE
CMD/POS
RUN
P.LIN
MENU X.TUNE POS MANU
0.0
CMD
POS
0.0
Simultaneousdisplayofthe
set-pointpositionandthe
actualpositionofthevalve
actuator(0...100%)
MENU P.LIN SP/PV MANU
0.0
CMD
POS
0.0
8.3 Master code
Operationofthedevicecanbelockedviaafreelyselectableuser
code.Inaddition,thereisanon-changeablemastercodewithwhich
youcanperformalloperatoractions onthe device.This4-digit
mastercodecanbefoundonthelastpagesofthisquickstartguide
intheChapter"Master code".
Ifrequired,cutoutthecodeandkeepitseparatefromthisquick-
start guide.
English
16
Operating levels
Type 8692, 8693
9 OPERATING LEVELS
Thereistheprocesslevelandthesettinglevelfortheoperation
andsettingoftype8692/8693.
Process level:
Therunningprocessisdisplayedandoperatedonthislevel.
Operatingstate: AUTOMATIC –Displayingtheprocessdata
MANUAL –Manuallyopeningandclosing
thevalve
Setting level:
Thebasicsettingsfortheprocessaremadeonthesettinglevel.
  –Inputtingtheoperatingparameters
–Activatingauxiliaryfunctions
If the device is in the AUTOMATIC operating state when
changingtothesettinglevel,theprocesscontinuesrunning
duringthesetting.
9.1 Switching between the operating
levels
Changetothesettinglevel MENU Pressfor
3 seconds
Returntotheprocesslevel EXIT Pressbriey
10 INSTALLATION
Onlyforpositionersandprocesscontrollerswithout
pre-assembledprocessvalve.
10.1 Installation of devices for the Ex area
Wheninstallingdevicesintheexplosion-protectedarea,observethe
"ATEXmanualforuseintheExarea"enclosedwiththeEx-devices.
10.2 Safety instructions
DANGER!
Risk of injury from high pressure in the system/device.
▶Beforeworkingonthesystemordevice,switchothepres-
sureandvent/drainlines.
Risk of injury due to electrical shock!
▶Beforereachingintothedeviceortheequipment,switcho
thepowersupplyandsecuretopreventreactivation!
▶Observeapplicableaccidentpreventionandsafetyregula-
tionsforelectricalequipment!
WARNING!
Risk of injury from improper assembly!
▶Assemblymaybecarriedoutbyauthorizedtechniciansonly
andwiththeappropriatetools!
Risk of injury from unintentional activation of the system and
uncontrolled restart!
▶Securesystemagainstunintentionalactivation.
▶Followingassembly,ensureacontrolledrestart.
English
17
Installation
Type 8692, 8693
10.3 Installation on process valves, types
2103, 2300 and 2301
NOTE!
When mounting on process valves with a welded body,
follow the installation instructions in the operating instruc-
tions for the process valve.
Theinstallationoftheswitchspindleandtheform
sealisdescribedintheoperatinginstructionsforType
8692/8693.YoucanndtheinstructionsontheBürkert
homepage.
Types8692/8693
Actuator
Processvalve
(example:Type
2103)
Valvebody
Housingjacket
Electrical
connectionhousing
Fig. 7: Installation on process valve, example type 2301
Duringtheinstallation,thecolletsofthepilotairportsmust
notbettedtotheactuator.
→Aligningactuatorwithtype8692/8693:
 1.Alignthepilotairportsoftheactuatorwiththe
connectionpiecesofType8692/8693(see"Fig. 8").
Connection piece
Pilot air ports
Fastening screws
max.1.5Nm
Fig. 8: Aligning the pilot air ports
 2.Alignthepuckoftheactuatorwiththeguiderailof
Type8692/8693(see"Fig. 9")
English
18
Installation
Type 8692, 8693
Guiderail
Puck
Fig. 9: Aligning the puck
NOTE!
Damage to the PCB or malfunction!
▶Ensurethatthepuckliesatontheguiderail.
→PushType8692/8693withoutturningitontotheactuatoruntil
nogapisvisibleontheformseal.
NOTE!
To comply with the degree of protection IP65 / IP67, do not
fasten the fastening screws too tightly.
▶Maximumtighteningtorque:1.5Nm.
→AttachType8692/8693totheactuatorusingthetwosidefas-
teningscrews.Indoingso,tightenthescrewsonlyhand-tight
(max.tighteningtorque:1.5Nm).
10.4 Installation on process valves, series
26xx and 27xx
Theinstallationoftheswitchspindleisdescribedinthe
operatinginstructionsforType8692/8693.Youcannd
theinstructionsontheBürkerthomepage.
→PlaceType8692/8693ontotheactuator.Indoingso,align
thepuckoftheactuatorwiththeguiderailofType8692/8693
(see"Fig. 10").
Guiderail
Puck
Fig. 10: Aligning the puck
NOTE!
Damage to the PCB or malfunction!
▶Ensurethatthepuckliesatontheguiderail.
→PressType8692/8693allthewaydownasfarastheactuator
andturnitintotherequiredposition.
English
19
Installation
Type 8692, 8693
EnsurethatthepneumaticconnectionsofType
8692/8693andthoseofthevalveactuatoraresituated
preferablyverticallyoneabovetheother(see"Fig. 11").
NOTE!
To comply with the degree of protection IP65 / IP67, do not
fasten the fastening screws too tightly.
▶Maximumtighteningtorque:1.5Nm.
→Attach Type 8692/8693 to the actuator using the two side
fasteningscrews.Indoingso,tightenthescrewsonlyhand-tight
(max.tighteningtorque:1.5Nm).
Pilot air outlet 21
Pilot air outlet 22
Upperpilotairport
Lower pilot air port
Fastening screws
max.1.5Nm
Type
8692/
8693
Actuator
Fig. 11: Installation of the pneumatic connections, series 26xx and 27xx
→Observethepneumaticconnectionthatmatchesthedesired
controlfunction.See"Tab.2:Pneumaticconnectionto
actuator".
→EstablishthepneumaticconnectionbetweenType8692/8693
andtheactuator.
NOTE!
Damage or malfunction due to ingress of dirt and moisture!
▶TocomplywiththedegreeofprotectionIP65/IP67,connect
thepilotairoutletwhichisnotrequiredtothefreepilotairport
oftheactuatororsealwithaplug.
"Inrestposition"meansthatthepilotvalvesofType8692/
8693 are isolated or not actuated.
If the ambient air is humid, a hose can be connected
betweenpilotairoutlet22ofthepositioner/processcon-
trollerandtheunconnectedpilotairportoftheactuatorfor
controlfunctionAorcontrolfunctionB.
Asaresult,thespringchamberoftheactuatorissupplied
withdryairfromtheventductofType8692/8693.
English
20
Installation
Type 8692, 8693
Control function Pneumatic connection Type 8692, 8693
with actuator
Pilot air
outlet
Types 8692
and 8693
Pilot air port actuator
A
Processvalve
closed in rest
position
(byspring
force)
21
lowerpilotairportofthe
actuator
22
shouldbeconnectedto
theupperpilotairportof
theactuator
B
Processvalve
open in rest
position
(byspring
force)
21
upperpilotairportofthe
actuator
22
shouldbeconnectedto
thelowerpilotairportof
theactuator
I
Processvalve
closed in rest
position
21
lowerpilotairportofthe
actuator
22
upperpilotairportofthe
actuator
Processvalve
open in rest
position
21
upperpilotairportofthe
actuator
22
lowerpilotairportofthe
actuator
Tab. 2: Pneumatic connection to actuator
10.5 Pneumatic connection
DANGER!
Risk of injury from high pressure in the system/device.
▶Beforeworkingonthesystemordevice,switchothepres-
sureandvent/drainlines.
Observe the following for the proper functioning of the
device:
▶Theinstallationmustnotcausebackpressuretobuild
up.
▶Tomaketheconnection,selectahosewithsucient
cross section.
▶Designtheexhaustairlineinsuchawaythatnowater
orotherliquidcangetintothedevicethroughthe
exhaustairport(3or3.1).
Exhaust air concept:
▶IncompliancewiththedegreeofprotectionIP67,an
exhaustairlinemustbeinstalledinthedryarea.
▶Alwaysmaintainanappliedcontrolpressureofat
least0.5...1barabovethepressurewhichisrequired
tomovethepneumaticactuatortoitsendposition.
Thisensuresthatthecontrolbehaviorisnotnegatively
aectedintheupperstrokerangeonaccountoftoo
littlepressuredierence.
▶Duringoperation,keeptheuctuationsofthecontrol
pressureaslowaspossible(max.±10%).
Ifuctuationsaregreater,thecontrolparametersmea-
suredwiththeX.TUNEfunctionarenotoptimum.
English
/