Analog Devices AD9574 Schematic

Type
Schematic

Analog Devices AD9574 is a programmable low jitter clock generator and frequency synthesizer ideal for high-performance communications, military, industrial, and test equipment applications. The device provides four differential LVPECL outputs, four differential LVDS outputs, and three 3.3-V/1.8-V CMOS outputs. The outputs can be independently programmed to generate frequencies from 10 MHz to 1.6 GHz with typical jitter below 100 fs RMS. The AD9574 also features a number of other advanced features, including:

  • Integrated voltage regulators for power supply flexibility
  • A programmable reference input for synchronization to an external clock source

Analog Devices AD9574 is a programmable low jitter clock generator and frequency synthesizer ideal for high-performance communications, military, industrial, and test equipment applications. The device provides four differential LVPECL outputs, four differential LVDS outputs, and three 3.3-V/1.8-V CMOS outputs. The outputs can be independently programmed to generate frequencies from 10 MHz to 1.6 GHz with typical jitter below 100 fs RMS. The AD9574 also features a number of other advanced features, including:

  • Integrated voltage regulators for power supply flexibility
  • A programmable reference input for synchronization to an external clock source
PPR1=0,2,4, C2=1NF, R2=0OHM
PPR1=1,3,5, C2=2NF, R2=0OHM
PPR1=6,7, C2=2NF, R2=4.75KOHM
PLEASE PLACE CLOSE TO THE PART
EXTERNAL LPF CIRCUITS
CURRENT ESTIMATION:180 MA
DEFAULT: CONNECT PIN2 AND PIN3
REF1
RESETB
REF0
PPR WITH MONITOR
DEFAULT: CONNECT PIN2 AND PIN3
AND ENABLE OR DISABLE XO OF REF_IN
THIS CONNECTOR IS USED FOR DEBUGGING
PPR W/O MONITOR
REF IN SELECT
REF MONITOR SELECT
IT'S BETTER TO PLACE THE POWER SUPPLY VIA BEFORE BYPASS CAP AND PART
CAN SUPPRESS THE SPUR OF CMOS OUPTUTS MORE THAN 10DB
REPLACING R103 AND R108 WITH 600OHM OR LARGER FERRIT BEAD
DEFAULT DISABLE: CONNECT XO0_EN AND XO1_EN WITH GND
XO IS DISABLED WHEN CONNECTED WITH GND
AD9574
1 4
<DESIGN_VIEW>
: N/A
Product(s): AD9574 Customer Board
HW TYPE : Customer Evaluation
1:1
A
02_036355
Liang Xu
0.47UF
2000PF
0
0
DNI
0
0
0
0
0
0
74LVC541APW
0
0.1UF
300
300
300
300
0.1UF
3.9K
SAMTECTSW10608GS3PIN
3.9K
300
3.9K
TLMS1100-GS08 (RED)
TLMS1100-GS08 (RED)
TLMS1100-GS08 (RED)
TLMS1100-GS08 (RED)
0.1UF
600OHM
0.1UF
TLMS1100-GS08 (RED)
TSW-106-08-G-D TSW-106-08-G-D
SAMTECTSW10608GS3PIN
3.9K
0.1UF 0.1UF 0.1UF 0.1UF 0.1UF 0.1UF 0.1UF 0.1UF 0.1UF
600OHM
7914J-1-000E
3.9K
AD9574BCPZ
C122
R115
P102
P103P103
DS102
C116
R108
C106
DS106
R125
P101
R112
C128
C129
R124
U301
U101
R116
S100
R103
C102C104C108C110C112C114C118C120
R130
DS103
DS104
DS105
R114R113
R127
R126
R129
R128
R118
R120
R119
R121
R122
R123
R2
C2
C123
LDREF_FREQ_L
REF0P
VDD_REF0
REF0N
VDD_REF1
REF1P
REF1N
PPR2
VDD_OUT0/1
OUT0N
OUT0P
OUT1P
OUT1N
GND
LDO_BYPASS
LF
VDD_PLL
LD
LF
LDO_BYPASS
VDD_VCO
VDD_RFDIV
PPR6
RESETB
OUT6P
OUT6N
VDD_OUT6
PPR5
OUT4N
VDD_OUT5
REF_FREQ_L
REF_FREQ_H
VDD_OUT2/3
OUT5N
OUT5P
OUT4P
VDD_OUT4
REFMON
PPR4
PPR3
PPR0
REF_SEL
GND
OUT2N
OUT2P
OUT3P
OUT3N
PPR1
VDD_MCLK_DIG
REF_SWITCH
REF_ACTIVE
MCLKP
MCLKN
3V3_9574
REF_ACTIVE
REF_FREQ_H
REF_FREQ_L
LD
REF_SWITCH
3V3_9574
GND
GND
GND
RESETB
GND
3V3_9574
3V3_9574
REF_SEL
GND
GND
3V3_9574
REF_ACTIVE
REF_SWITCH
XO0_EN
XO1_EN
REF_FREQ_H
GND
GND
GND
GND
VDD_OUT0/1
VDD_OUT6
GND
GND
GND
GND
REFMON
RESETB
REF_SEL
GND
REFMON
GND
VDD_OUT5
VDD_OUT4
VDD_OUT2/3
VDD_RFDIV
VDD_VCO
VDD_MCLK_DIG
VDD_PLL
VDD_REF0
VDD_REF1
GND
GND
GND
GND
GND
GND
GND
GND
GND
3V3_9574
3V3_9574
3V3_9574
3V3_9574
3V3_9574
3V3_9574
3V3_9574
3V3_9574
3V3_9574
3V3_9574
3V3_9574
3
2
1
12
10
8
6
4
2
11
9
7
5
3
1
A C
21
A C
3
2
1
20
11
12
13
14
15
16
17
18
9
8
7
6
5
4
3
2
10
191
17
18
4
3
13
36
23
31
30
8
42
20
25
43
48
34
35
44
6
5
1
2
19
24
26
27
7
41
47
PAD
22
21
32
33
29
28
39
40
38
37
11
12
10
9
45
46
15
16
14
2B
2A
1B
1A
21
A C
A C
A C
PAD
REF_SEL
PPR0
MCLK_N
MCLK_P
REF_ACT
REF_SW
VDD_MCLK
PPR1
OUT3_N
OUT3_P
OUT2_P
OUT2_N
VDD_OUT23
REF_FHI
REF_FLO
OUT5_N
OUT5_P
VDD_OUT5
VDD_OUT4
OUT4_P
OUT4_N
PPR3
PPR4
REFMON
PPR5
VDD_OUT6
OUT6_N
OUT6_P
RESET_N
PPR6
VDD_RFDIV
VDD_VCO
LDO_BYP
LF
LD
VDD_PLL
OUT1_N
OUT1_P
OUT0_P
OUT0_N
VDD_OUT01
PPR2
REF1_N/XTAL1_B
REF1_P/XTAL1_A
VDD_REF1
REF0_N/XTAL0_B
VDD_REF0
REF0_P/XTAL0_A
EN2_NEN1_N
O7
O6
O5
O4
O3
O2
O1
O0
I7
I6
I5
I4
I3
I2
I1
I0
GNDVCC
D
THIS DRAWING IS THE PROPERTY OF ANALOG DEVICES INC.
IN PART, OR USED IN FURNISHING INFORMATION TO OTHERS,
OR FOR ANY OTHER PURPOSE DETRIMENTAL TO THE INTERESTS
THE EQUIPMENT SHOWN HEREON MAY BE PROTECTED BY PATENTS
A
C
IT IS NOT TO BE REPRODUCED OR COPIED, IN WHOLE OR
DRAWING NO.
2
SCALE
D
D
D
SIZE
D
REV
SHEET
1
1
A
2
3
4
3
5
8
D
7
67
8
A
B
C
C
D
5
4
APPROVED
B
6
DESCRIPTION
REVISIONS
OF
OL G
E
OWNED OR CONTROLLED BY OWNED ANALOG DEVICES.
E
AN
V
OF ANALOG DEVICES.
SCHEMATIC
S
PTD ENGINEER
DESIGN VIEW
REV
DATE
EXTERNAL SMA INPUT
DEFAULT: XO INPUT
MONITOR CLOCK INPUT
SOLDER DOWN C226,C227
SOLDER DOWN C211,C222
XTAL INPUT
DEFAULT: XO INPUT
EXTERNAL SMA INPUT
XTAL INPUT
STANDARD XO INPUT
FOR 1.8V CMOS INPUT: REMOVE R222,R223,R221,T202. SOLDER DOWN R219,R220
FOR 3.3V CMOS INPUT: REMOVE R222,R223,R221,T202. SOLDER DOWN R219,R220
STANDARD XO INPUT
PLEASE DO USE HIGH PERFORMACE XO FOR REFERENCE INPUT!
FOR XTAL INPUT: REMOVE R224,R225. SOLDER DOWN R222,R223
SOLDER DOWN C226,C227 WITH 0OHM RESISTOR
FOR DIFFERENTIAL INPUT: REMOVE R222,R223,SOLDER DOWN C226,C227
OUT2:(156.25M),(155.52M),(160M);HSTL
OUT1:(25M),(19.44M)
3.3V CMOS/HSTL/OD
OUT0:(25M/50M),(19.44M/38.88M)
3.3V CMOS/HSTL/OD
OUT3:(156.25M),(155.52M),(160M);HSTL
LVDS/HCSL/HSTL
(312.5M/125M),(160M/80M)
OUT5:(125M/100M),(77.76M/38.88M)
LVDS/HCSL/HSTL
(312.5M/125M),(160M/80M)
OUT4:(125M/100M),(77.76M/38.88M)
LVDS/3.3V CMOS/1.8V CMOS/OD
OUT6:(33.3M),(66.6M),(133.3M)
REF1/XTAL1 INPUT
PLEASE DO USE HIGH PERFORMACE XO FOR REFERENCE INPUT!
FOR 1.8V CMOS INPUT: REMOVE R215,R216,R214,T201. SOLDER DOWN R212,R213
SOLDER DOWN C221,C222 WITH 0OHM RESISTORS
FOR 3.3V CMOS INPUT: REMOVE R215,R216,R214,T201. SOLDER DOWN R212,R213
FOR DIFFERENTIAL INPUT: REMOVE R226,R227,SOLDER DOWN T203
PLEASE CONFIGURE THE MONITOR INPUT FORMAT WITH DIFFERENTIAL MODE (PPR6)
WHEN MONITOR CLOCK IS 3.3V CMOS INPUT.
DEFAULT: 3.3V CMOS INPUT
FOR BETTER OUTPUT PERFORMANCE,
FOR DIFFERENTIAL INPUT: REMOVE R215,R216,SOLDER DOWN C221,C222
REF0/XTAL0 INPUT
CLOCK OUTPUTS
FOR XTAL INPUT: REMOVE R217,R218. SOLDER DOWN R215,R216
2 4
<DESIGN_VIEW>
: N/A
Product(s): AD9574 Customer Board
HW TYPE : Customer Evaluation
1:1
A
02_036355
Liang Xu
49.9
142-0701-201
0
DNI
MABA-007159-000000
0
DNI
0
142-0701-201
DNI
MABA-007159-000000
330
49.9
1UF
1UF
49.9
DNI
0.1UF
DNI
0.1UF
12PF
25MEGHZ
12PF
0
DNI
DNI
0 0
142-0701-201
MABA-007159-000000
DNI
0
0
DNI
49.9
0.1UF
DNI
0.1UF
DNI
12PF
12PF
0
DNI
0
DNI
0
DNI
0
100
0.1UF
0.1UF
MABA-007159-000000
0
DNI
0
DNI
3.9K
0.1UF
0
100
0.1UF
0.1UF
DNI
0
10PF
DNI DNI
10PF
DNI
10PF100
DNI
0.1UF
0.1UF
142-0701-851
10PF
DNI
DNI
100
0.1UF
142-0701-851
142-0701-851
142-0701-851
0
DNI
10PF
0.1UF
DNI
0.1UF
0
100
DNI
49.9
0.1UF
DNI
49.9
25.000MEGHZ
3.9K
0
0.1UF
DNI
10PF100
DNI
0.1UF
0.1UF
142-0701-851
0
0
100
0.1UF
49.9
DNI
0.1UF
142-0701-851
142-0701-851
142-0701-851
142-0701-851
142-0701-851
142-0701-851
142-0701-851
MABA-007159-000000
25.000MEGHZ
25MEGHZ
Y204
T204
J205
J209
J210
J211
J212
J213
J214
C213
R206
R235
J201
R201
C203
C225
R241
Y202
R207
C215
R209
R208
R236
C217
C219
R237
J203
J204
C218
C220
C205
C206
R202
C204C207
R230
C209
C210
R203
R225
R242
R231
T205
C211
C212
R204
R217
R216
C223
C224
C221
C222
R214
R212
R213
T201
J217
R224R222
C228
Y203
C229
C227
R221
C232
R228
R226
T203
J216
R227
T202
J215
Y201
R220
C214
R205
R234C201
C202
R218
C216
R210
J202
R211
J207
C208
C230
R232
R233
R215
R223
C226
C231
R219
GND
GND
REF1P
REF1N
GND
GND
REF1N
REF1P
GND
REF0P
REF0N
GND
GND
REF0P 3V3_9574
XO0_EN
MCLKP
MCLKN
XO1_EN
OUT3P
OUT3N
GND
GND
REF1P
OUT2N
OUT2P
GND
GND
OUT1P
GND
OUT1N
GND
GND
GND
OUT6P
GND
GND
GND
GND
GND
OUT5N
GND
GND
OUT6N
OUT5P
GND
GND
GND
GND
REF0P
OUT0N
OUT0P
GND
GND
OUT4P
OUT4N
GND
GND
GND
GND
GND
GND
GND
3V3_9574
REF0N
4
1 3
2
5
4 3
1
5432
1
5432
1
5 4 3 2
1
5432
1
5 4 3 2
1
5432
1
5 4 3 2
1
4
1 3
2
5432
1
5 4 3 2
1
5
4 3
1
5
4 3
1
5432
1
31
42
5
4 3
1
5432
1
5
4 3
1
5432
1
31
42
5432
1
GND
OUTPUT
VDD
GND
TRISTATE
SECPRI
OUTPUT
VDD
GND
TRISTATE
SECPRI
SECPRI
SECPRI
SECPRI
GND
D
THIS DRAWING IS THE PROPERTY OF ANALOG DEVICES INC.
IN PART, OR USED IN FURNISHING INFORMATION TO OTHERS,
OR FOR ANY OTHER PURPOSE DETRIMENTAL TO THE INTERESTS
THE EQUIPMENT SHOWN HEREON MAY BE PROTECTED BY PATENTS
A
C
IT IS NOT TO BE REPRODUCED OR COPIED, IN WHOLE OR
DRAWING NO.
2
SCALE
D
D
D
SIZE
D
REV
SHEET
1
1
A
2
3
4
3
5
8
D
7
67
8
A
B
C
C
D
5
4
APPROVED
B
6
DESCRIPTION
REVISIONS
OF
OL G
E
OWNED OR CONTROLLED BY OWNED ANALOG DEVICES.
E
AN
V
OF ANALOG DEVICES.
SCHEMATIC
S
PTD ENGINEER
DESIGN VIEW
REV
DATE
PPR CONTROL SECTION
PPR3 --- OUT4 AND OUT5 OPTIONS
PPR1 --- FREQUENCY TRANSLATION OPTIONS
PPR0 --- REFERENCE INPUT OPTIONS
PPR4 --- OUT6 OPTIONS
DEFAULT:PPR0=0,PPR1=1,PPR2=3,PPR3=0,PPR4=1,PPR5=6,PPR6=4
PPR6 --- MCLK INPUT OPTIONS
PPR5 --- REFERENCE MONITOR THRESHOLD OPTIONS
PPR2 --- OUT0 AND OUT1 OPTIONS
GNDGNDVCC VCCVCC GNDGND GNDGND VCCVCCVCC VCC GND
3 4
<DESIGN_VIEW>
: N/A
Product(s): AD9574 Customer Board
HW TYPE : Customer Evaluation
1:1
A
02_036355
Liang Xu
1.8K
SAMTECTSW10608GS3PIN SAMTECTSW10608GS3PIN
SAMTECTSW10608GS3PIN
3.9K
820
8.2K
1.8K
3.9K
820
SAMTECTSW10608GS3PIN
SAMTECTSW10608GS3PIN
3.9K
820
SAMTECTSW10608GS3PIN SAMTECTSW10608GS3PIN SAMTECTSW10608GS3PIN SAMTECTSW10608GS3PIN SAMTECTSW10608GS3PIN
SAMTECTSW10608GS3PIN
SAMTECTSW10608GS3PIN
1.8K
8.2K
SAMTECTSW10608GS3PIN
3.9K
820
SAMTECTSW10608GS3PIN
8.2K
1.8K
SAMTECTSW10608GS3PIN
3.9K
820
SAMTECTSW10608GS3PIN
8.2K
1.8K
SAMTECTSW10608GS3PIN
3.9K
820
SAMTECTSW10608GS3PIN
8.2K
1.8K
SAMTECTSW10608GS3PIN
3.9K
820
SAMTECTSW10608GS3PIN
8.2K
1.8K
SAMTECTSW10608GS3PIN
8.2K
R408
P402
R428
P426
P427
R422
P422P418
R419
P419
P414
R413
R415R412
R410
P424P420P416P412
R409
P406
P407
R405
R404
R401
R403
R426
P423
R418
R416
P410
P411
R425R421R417
R411R407
R402
P403
P408P404
R427R424R423R420
R414
P415
P428
R406
3V3_9574 GND
PPR0
3V3_9574 GND
PPR1
3V3_9574 GND
PPR2
3V3_9574 GND
PPR3
3V3_9574 GND
PPR4
3V3_9574 GND
PPR5
3V3_9574 GND
PPR6
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
D
THIS DRAWING IS THE PROPERTY OF ANALOG DEVICES INC.
IN PART, OR USED IN FURNISHING INFORMATION TO OTHERS,
OR FOR ANY OTHER PURPOSE DETRIMENTAL TO THE INTERESTS
THE EQUIPMENT SHOWN HEREON MAY BE PROTECTED BY PATENTS
A
C
IT IS NOT TO BE REPRODUCED OR COPIED, IN WHOLE OR
DRAWING NO.
2
SCALE
D
D
D
SIZE
D
REV
SHEET
1
1
A
2
3
4
3
5
8
D
7
67
8
A
B
C
C
D
5
4
APPROVED
B
6
DESCRIPTION
REVISIONS
OF
OL G
E
OWNED OR CONTROLLED BY OWNED ANALOG DEVICES.
E
AN
V
OF ANALOG DEVICES.
SCHEMATIC
S
PTD ENGINEER
DESIGN VIEW
REV
DATE
6V EXTERNAL POWER
POWER SUPPLY SECTION
DC TO DC STEP DOWN 6V TO 4V
DEFAULT CONNECT PIN1 AND PIN2
YOU CAN USE EXTERNAL 4V POWER SUPPLY FROM PIN2 AND PIN3
IT'S BETTER TO USE A LC FILTER TO SUPPRESS THE SWITCH FREQUENCY OF DC/DC POWER SUPPLY.
NOTE: AD9574 HAS INTERNAL LDOS, SO 3.3V DC/DC POWER SUPPLY CAN BE DIRECTLY USED FOR AD9574
YOU CAN USE EXTERNAL 3.3V POWER SUPPLY FROM PIN2 AND PIN3
DEFAULT CONNECT PIN1 AND PIN2
3.3V REGULATOR FOR AD9574
4 4
<DESIGN_VIEW>
: N/A
Product(s): AD9574 Customer Board
HW TYPE : Customer Evaluation
1:1
A
02_036355
Liang Xu
10UF
ADP7104ARDZ-3.3
PJ-102A
470UF
10UF
1UH
470UF 10UF
100K
10UF 1UF
10UH
SAMTECTSW10608GS3PIN
0.1
10UF
100UF
0
DNI
1UF 0
0.1UF
10K 40.2K
1UF
4.7UH
1UF
22UF
SAMTECTSW10608GS3PIN
B230A-13-F
ADP2300AUJZ
U500
CR501
C513
L501
C505
R504
C507
C512
R506
P502
C500
P500
U501
C508
R501C504
R502
L502
P501
C506
R503
C514
C510C509
R505
C503C502
L500
C501
4VDC_IN
GND
6VDC
GND
6V_FILT
GND
GND
GND
3V3_LDO
GND
GND GND
GND
GND
4VDC_IN
GND
3V3_9574
5
6
2
3
4
1
A C
3
2
1
N
P
3
2
1
18
27
PAD
4
6 3
5
3
2
1
N
P
SW
VIN
EN
FB
GND
BST
SENSE
PAD
VIN
PG
GND
EN NC
GND
VOUT
D
THIS DRAWING IS THE PROPERTY OF ANALOG DEVICES INC.
IN PART, OR USED IN FURNISHING INFORMATION TO OTHERS,
OR FOR ANY OTHER PURPOSE DETRIMENTAL TO THE INTERESTS
THE EQUIPMENT SHOWN HEREON MAY BE PROTECTED BY PATENTS
A
C
IT IS NOT TO BE REPRODUCED OR COPIED, IN WHOLE OR
DRAWING NO.
2
SCALE
D
D
D
SIZE
D
REV
SHEET
1
1
A
2
3
4
3
5
8
D
7
67
8
A
B
C
C
D
5
4
APPROVED
B
6
DESCRIPTION
REVISIONS
OF
OL G
E
OWNED OR CONTROLLED BY OWNED ANALOG DEVICES.
E
AN
V
OF ANALOG DEVICES.
SCHEMATIC
S
PTD ENGINEER
DESIGN VIEW
REV
DATE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Analog Devices AD9574 Schematic

Type
Schematic

Analog Devices AD9574 is a programmable low jitter clock generator and frequency synthesizer ideal for high-performance communications, military, industrial, and test equipment applications. The device provides four differential LVPECL outputs, four differential LVDS outputs, and three 3.3-V/1.8-V CMOS outputs. The outputs can be independently programmed to generate frequencies from 10 MHz to 1.6 GHz with typical jitter below 100 fs RMS. The AD9574 also features a number of other advanced features, including:

  • Integrated voltage regulators for power supply flexibility
  • A programmable reference input for synchronization to an external clock source

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI