HP Color LaserJet Enterprise M651 series User guide

Brand: HP

Model: Color LaserJet Enterprise M651 series

Type: User guide

HP Trusted Platform Module

User Guide

Development Company, L.P.

Reproduction, adaptation, or translation

without prior written permission is prohibited,

except as allowed under the copyright laws.

The information contained herein is subject to

change without notice.

The only warranties for HP products and

services are set forth in the express warranty

statements accompanying such products and

services. Nothing herein should be construed

as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or

omissions contained herein.

Part number: F5S62-90901

Edition 1, 11/2014

Table of contents

1 Product overview .......................................................................................................................................... 1

Product views ........................................................................................................................................................ 2

Product specifications ........................................................................................................................................... 3

Technical specifications ...................................................................................................................... 3

Operating environment specifications ............................................................................................... 3

Supported printers and MFPs ............................................................................................................. 3

Product Dimensions ............................................................................................................................ 3

Product hardware setup and software installation .............................................................................................. 4

2 Manage the product ....................................................................................................................................... 7

View TPM status via HP Embedded Web Server (EWS) ......................................................................................... 8

How to access the HP Embedded Web Server (EWS) .......................................................................... 8

Product security features ................................................................................................................... 8

Installation confirmation .................................................................................................. 8

Certificates and the TPM ................................................................................................... 8

EWS .................................................................................................................................... 8

Stop using TPM ...................................................................................................................................................... 9

Install a new or re-enable an existing TPM after disabling a previous TPM ...................................................... 14

3 Solve problems ........................................................................................................................................... 17

HP TPM related error codes ................................................................................................................................. 18

Software and firmware updates ......................................................................................................................... 19

4 Service and Troubleshooting ........................................................................................................................ 21

Customer support ................................................................................................................................................ 21

Index ............................................................................................................................................................. 23

ENWW iii

iv ENWW

1 Product overview

The HP Trusted Platform Module Accessory (TPM) provides secure device identity with certificate private keys

generated and protected by the TPM. The TPM strengthens protection of encrypted credentials and data

stored on the printer or MFP by automatically sealing device encryption keys to the TPM.

The TPM automatically pairs with the printer at installation. Once installed, the printer and the TPM are

sealed and the printer owns the TPM. The TPM may not be moved to another device without losing its

ownership from the original printer. If moved and ownership is transferred to a new printer, the data on the

original printer will be cryptographically erased.

The TPM can create, use and store encryption keys. It automatically protects drive lock password, stored

passwords, and certificate private keys. Keys are sealed to the master encryption key stored in the TPM and

only accessible through the TPM.

The TPM prevents the printer from starting if the TPM is missing. If the TPM is removed from the printer, a

front control panel error message will appear to indicate that the TPM is missing.

If the Stop Using TPM process is performed, firmware will be reinstalled when the printer is restarted. All

other installed applications or solutions will need to be reloaded and the printer reconfigured.

NOTE: In some situations, a hard drive error might be seen requiring printer firmware to be manually

restored with a USB flash drive at the preboot menu.

ENWW 1

Product views

2 Chapter 1 Product overview ENWW

Product specifications

Technical specifications

Part number F5S62A

What’s in the box HP Trusted Platform Module, Install Guide

Warranty One-year, onsite limited warranty

Standards and certifications Designed to the TPM 1.2 standard set by the Trusted Computing

Group.

The Trusted Computing Group (TCG) is an international industry standards group that develops specifications amongst its members.

The TCG publishes the specifications for use and implementation by the industry.

Learn more at www.hp.com/go/printsecurity.

Operating environment specifications

Temperature Operating: 13 to 30° C (56 to 86° F); Storage: 0 to 40° C

Humidity Humidity: Operating: 10 to 80% RH; Storage: 10 to 90% RH

Supported printers and MFPs

HP LaserJet: M806

HP LaserJet MFP: M630, M830

HP Color LaserJet: M651, M855

HP Color LaserJet MFP: M680, M880

HP Officejet: X555

HP Officejet MFP: X585

If your printer is not listed, please refer to the printer datasheet to confirm if the HP Trusted Platform Module

is a compatible accessory.

Product Dimensions

Dimensions 21.62 x 18.03 x 6.2 mm (0.85 x 0.71 x 0.24 in)

Weight 1.71 g (0.06 oz)

ENWW Product specifications 3

Product hardware setup and software installation

1. Go to www.hp.com/support and download the latest firmware version for your printer. Update the

firmware on your printer. Refer to the printer documentation for instructions. After the latest firmware

is installed successfully, go to Step 2.

2. Turn the printer off, and then unplug the power cord and network cables.

3. Remove the formatter from the printer. Formatter appearance and removal procedure will vary from

printer to printer. Refer to the product support page for your printer on

www.hp.com/support for

additional information, if needed.

4. Remove the TPM from packaging.

4 Chapter 1 Product overview ENWW

5. Locate the correct connector on the formatter. The outline of a white square the same size as the TPM is

printed on the formatter and surrounds the connector and a hole in the formatter.

NOTE: The letters AUX might not appear on some older boards. The location of the connector on your

formatter might be different from the location shown.

6. Hold the TPM by the edges as shown and align the connector on the TPM with the connector on the

formatter. Gently position the TPM on the connector on the formatter. Apply slow, steady, downward

pressure. You will hear a click when the connectors are fully engaged.

7. Reinstall the formatter into the printer.

NOTE: It is recommended to secure the formatter with a Kensington Lock.

ENWW Product hardware setup and software installation 5

8. Plug in the power cords and network cable, and then turn the printer on.

9. After the printer has initialized, print a configuration page. Refer to the printer documentation for

instructions. Look under the Installed Personalities and Options heading on this page and verify that

HP TPM Accessory: Enabled is listed. For additional TPM user information and troubleshooting, go to

www.hp.com/support/.

6 Chapter 1 Product overview ENWW

2 Manage the product

●

View TPM status via HP Embedded Web Server (EWS)

●

Stop using TPM

●

Install a new or re-enable an existing TPM after disabling a previous TPM

ENWW 7

View TPM status via HP Embedded Web Server (EWS)

●

How to access the HP Embedded Web Server (EWS)

●

Product security features

NOTE: The HP Embedded Web Server is not accessible beyond the network firewall.

How to access the HP Embedded Web Server (EWS)

Refer to the printer user guide for information on how to access the HP Embedded Web Server.

Product security features

The product includes several security features to ensure that the information it holds is made more secure

from external software attack and physical theft.

●

Installation confirmation

●

Certificates and the TPM

●

EWS

Installation confirmation

After the printer has initialized, print a configuration page. Refer to the printer documentation for

instructions. Look under the Installed Personalities and Options heading on this page and verify that

HP TPM Accessory: Enabled is listed.

Certificates and the TPM

The TPM provides secure device identity with certificate private keys generated and protected by the TPM. It

strengthens protection of encrypted credentials and data stored on the printer or MFP by automatically

sealing device encryption keys to the TPM.

NOTE: New certificate keys will be generated by the TPM unless marked as exportable. Exportability is

specified at the time the key is generated.

EWS

The Embedded Web Server (EWS) can be used to perform the following tasks:

●

Determine which certificates on the printer are protected by the TPM

●

Create certificates using the TPM

●

Export the certificate and private keys if they are marked as exportable

NOTE: Refer to the printer user guide for information on how to access the HP Embedded Web Server

(EWS).

8 Chapter 2 Manage the product ENWW

Stop using TPM

WARNING! By performing this procedure, all customer data will be lost, including at installed solutions on

the device.

1. Access the preboot menu by pressing the HP logo when the initializing screen has reached 1/8 for Multi

Function Printers. Press the HP logo before 1/8 for Single Function Printers.

ENWW Stop using TPM 9

2. From the preboot menu on the control panel, navigate to Administrator and press OK. If prompted,

enter the Administrator password.

3. Navigate to F: TPM Config and press OK.

10 Chapter 2 Manage the product ENWW

4. Press Stop Using and then OK.

5. The control panel displays Data will be lost Firmware reinstall may be needed. Press any key.

ENWW Stop using TPM 11

6. Press Disable TPM then OK.

7. The control panel displays TPM Disable was Successful. Press any key.

NOTE: Once disabled, the TPM may be left on the formatter or removed. If left installed, it can be re-

enabled by following the steps in the Install a new or re-enable an existing TPM after disabling a

previous TPM section.

12 Chapter 2 Manage the product ENWW

8. The printer restarts and displays Upgrading FW and progress bar on the control panel.

9. Verify the TPM is disabled by printing a configuration page and looking for HP TPM Accessory: Disabled.

ENWW Stop using TPM 13

Install a new or re-enable an existing TPM after disabling a

previous TPM

1. Install the TPM on the formatter and then install the formatter in the printer.

2. Access the preboot menu by pressing the HP logo when the initializing screen has reached 1/8 for Multi

Function Printers. Press the HP logo before 1/8 for Single Function Printers.

14 Chapter 2 Manage the product ENWW

3. At the preboot menu, navigate to Administrator and press OK. If prompted, enter the Administrator

password.

4. Navigate to F: TPM Config and press OK.

ENWW Install a new or re-enable an existing TPM after disabling a previous TPM 15

5. Press Enable and Use and then OK.

6. The printer restarts.

7. After the printer has initialized, print a configuration page. Look under the Installed Personalities and

Options heading on this page and verify that HP TPM Accessory: Enabled is listed.

16 Chapter 2 Manage the product ENWW

Page is loading ...

HP Color LaserJet Enterprise M651 series User guide

HP Color LaserJet Enterprise M651 series User guide

HP Color LaserJet Enterprise M651 series User guide

Related papers

Other documents