Apro AP-B9511SKTL User manual

Brand: Apro

Model: AP-B9511SKTL

Category: Security cameras

Type: User manual

USER'S MANUAL

High Resolution Camera

1. Specifications

2. Features

1) SUPER HIGH

2) EXCELLENT

It can clearly distinguish the outline and color of a

subject in an extremely low luminance environment with

enhancementof Sens-Up feature.

4) D-WDR(Digital Wide Dynamic

5) DAY/NIGHT

The camera identifies whether it is day or night, and

automatically switches to the appropriate mode

according to its external environment.

Please read this manual thoroughly before operation and

keep it handy for further reference.

3. Camera OSD Control

RIGHTLEF

DOWN

SETUP(MENU):Push Down

4. OSD Menu Structure

SETUP MENU

Press this control To do this

UP, DOWN Select a new item

LEFT, RIGHT

Select a menu item

SETUP(MENU)

Access a submenu

New Sony Super HAD II 410K CCD combined with an

innovated new DSP Technology will enable to achieve

Super High Resolution 580TVL with high S/N Ratio.

3) 3DNR

3 Dimensional Digital Noise Reduction Technology will

dramaticallyreduce the Gain noise in digital image

processing and enable to produce clear, sharp images

in low light conditions.

With the newly innovated DSP Technology, the camera

enable to obtain clear, high quality pictures even in

strong backlight.

6) MOTION DETECT

The camera detects motion and generates signals

without additional external sensors, which enable to

monitor activity efficiently by connecting to an alarm

5. SETUP Menu Functions

1) LENS

Selects Lens Type.

BRIGHTNESS : Adjust Brightness of the lens (DC Lens only)

2) EXPOSURE

<SHUTTER/ BRIGHTNESS /AGC / SENS-UP / BLC /

D-WDR / RETURN>

SHUTTER : Adjust shutter settings : AUTO/FLK/MANUAL

FLK : Flicker - Less Mode

BRIGHTNESS : Adjust Brightness of the lens (Manual Lens

only).

AGC(Auto Gain Control) : To get brighter picture

- High / Middle / Low / Off

SENSE-UP : To get clear image under night or low lighting

level.

- AUTO : In condition of low light or night time, select this

feature.

Select proper level from X2 to X256

- OFF : Deactivate Sense-Up feature

BLC (Back Light Compensation) : To distinguish a subject

and background at the same time, even when the

subject is in backlight.

- OFF / BLC / HSBLC (High Suppress BLC)

* HSBLC : This feature is to enable a user to select Mask

ITEM High Resolution Camera

Power Source DC 12V & AC 24V ( Option )

Image Sensor 1/3

”

, SONY SUPER HAD CCD II 410,000 pixels

Effective Pixels 768(H) x 494(V) (NTSC) , 755(H) x 582(V) (PAL)

Maximum Aperture Ratio 1 : 1.3 ~2.0

Scanning System 2 : 1 Interlaced 525 Lines / 60 Fields / 30 Frames

Video Output 1.0V [p-p] NTSC Composite, 75Ω

Resolution 580 TV Line

Min. Illumination

0.3Lux (F.1.2), 0. 001Lux (Sens-Up : Auto),

0.00Lux(LED On)

S/N ( Y signal) 52dB (AGC Off, Weight On)

On Screen Display Built - in

Back Light Compensation OFF / BLC / HSBLC Selectable

D-WDR OFF / INDOOR / OUTDOOR

Gain Control OFF / LOW / MIDDLE / HIGH Selectable

Electric Shutter Speed

1/60 ~ 1/120,000 sec (NTSC)

1/50~1/100,000 sec (PAL)

WHITE BALANCE

ATW / AWB/ AWC – SET / MANUAL

/ INDOOR / OUTDOOR

DAY / NIGHT COLOR / AUTO / EXT / BW

3DNR ON / OFF

SENS-UP OFF / AUTO (0-256X Level Selectable)

Motion Detection MD4 Areas Selectable / OFF

PRIVACY Function ON / OFF (8 Programmable Zone)

D-EFFECT DIGITAL ZOOM (0~32X Level Selectable)

Operational Temperature -20

℃

~ +50

℃

( - 20

℉

~122

℉

)

Operational Humidity 30% ~90% RH

EXIT

3DNR

ON OFF

WHITE BALANCE

ATW INDOOR OUTDOO AWC- MANUAL

DAY/NIGHT

COLOR AUTO EXT

B/W

ADJUST

SHARPNESS

BLUE

RED RETURN

RESET

FACTORY

RETURN

CAMTITL D-

PRIVACY SYNC

RS-485

LANGUAGE

MOTION

RETURN

SPECIAL

LENS Option

MANUAL

EXPOSURE

SHUTTER

AGC SENSE-UP

RETURN

BLC

D-WDR

BRIGHTNES

VER.090701

4) DAY/NIGHT

To display picture in color or B/W.

COLOR : Display always color picture.

AUTO : Switched to color in a normal environment, but

switches to B/W automatically when ambient illumination

is low.

- DELAY : Set Delay time to switch color to B/W

- S-LEVEL : Set Start Level of luminance that you define.

- E-LEVEL : Set End Level of luminance that you define.

* Only certified technicians will be allow to this feature.

B/W : Display always B/W picture.

EXT : It enables user to control DAY/NIGHT by imputing

external signal.

3) WHITE BALANCE

<ATW / AWB / AWC-SET / MANUAL / INDOOR /

OUTDOOR >

9) EXIT(SAVE)

Save OSD settings and exit the SETUP menu.

(6-4) MOTION

To transmit a alert signal when it detects motion of an

object on the screen. 4 areas can be selectable.

OFF : Deactivate Motion Detection mode.

ON : Activate Motion Detection mode. Select motion

detection area where you want by using JOYSTICK S/W.

(6-7) LANGUAGE (English/

한국어

日本語

)

Choose language that should be displayed.

This manual is based on the date as shown in the right and

specifications are subject to change without notice for

quality improvement.

6) SPECIAL

(6-1) CAM TITLE

To display a title on the monitor

OFF : Deactivate CAM TITLE. No title will be appeared

on the monitor.

ON : Enter your desired title by using "JOYSTICK S/W"

with 4 direction.

Factory Reset : Set all values of OSD back to "FACTORY

DEFAULT"

ATW : Auto Tracking White Balance.

Use this mode when color temp. is between

1800k~10,500k.

AWB : Automatically adjust White Balance to your

specific conditions.

AWC->SET : To find the optimal setting for current

luminance environment in this mode. Set the point the

camera towards a sheet of white paper and press the

Joystick S/W. If the environment changes, readjust it.

MANUAL : To fine-tune White Balance manually. Set

White Balance first by using the ATW or AWC mode.

After that switch to Manual mode, fine-tune the White

Balance and then press Joystick S/W

INDOOR : Use this mode when color temp. is between

4,500k~8,500k.

OUTDOOR : Use this mode when color temp. is between

1,800k~10,500k (Sodium light included).

5) 3DNR

To reduce Noise on the screen.

OFF : Deactivate 3 DNR Mode.

ON : Activate 3 DNR. Select desired 3DNR Level.

(6-3) RS-485 (Option)

Check your camera can support this feature.

- Set proper BAUD RATE to communicate with other

(6-5) PRIVACY

(6-2) D-EFFECT

< FREEZE / MIRROR / D-ZOOM / GAMMA /

Use Digital Effect for your specific application.

FREEZE : To hold a stop picture.

MIRROR : Reverse the picture vertically or horizontally.

D-ZOOM : 32X Digital Zoom. Set your desirable Zoom

Ratio.

GAMMA : 0.45 is fixed. Do not adjust it unless certified

technician.

To mask area which you want to mask. 8 areas can be

selectable.

OFF : Deactivate PRIVACY mode.

ON : Activate PRIVACY mode. Set areas with JOYSTICK

S/W.

(6-6) SYNC

Two SYNCHRONIZATION modes are available, Internal /

Line Lock.

7) ADJUST

Adjust sharpness / RED and BLUE characteristics on the

picture.

8) RESET

Apro AP-B9511SKTL User manual

Brand: Apro

Model: AP-B9511SKTL

Category: Security cameras

Type: User manual

Download PDF

report

Apro AP-B9511SKTL User manual

Apro AP-B9511SKTL User manual

Other documents