1
GMC-60 Gooseneck Microphone Audio Convertor
GMC-60 Audio convertor
Parts and functions
1. Power on/off
2. Power indicator
3. Port ① indicator
4. Port ② indicator
5. Port ③ indicator
6. Port ④ indicator
7. Port ⑤ indicator
8. Port ⑥ indicator
9. Chairman-Delegate switch
10. GMC-60 series connection jack
11. Unbalanced audio output (Φ6.3mm)
12. Balanced audio output (XLR)
13. Port ⑥
14. Port ⑤
15. Port ④
16. Port ③
17. Port ②
18. Port ①
19. DC input (15V 4.3V)
Note: Port ①~⑥ indicators function with GM-143 RJ-45 lockable versions only.
Instructions
1. Installation with GM-143 series
There are six ports on the back of convertor. Each port can be connected with a GM-143
series of up to 10 units. Each convertor can support 60 units at most.
2. System expansion
When more than 60 units are required or the ports aren’t enough, GMC-60 can link to
another convertor via its rear port ⑩ to support more GM-143 units.
IMPORTANT! Each system expansion max covers two GMC-60 convertors and 120 GM-143
units. For more-unit installation, please set up another system with GMC-60 to cover the rest
GM-143 units.
3. CHAIRMAN-DELEGATE switch ⑨
If the convertor’s connected units include GM-143C (chairman unit), please slide the switch
to ‘C’ position. In other cases, please slide it to ‘S’ position.
4. Audio output
There are two audio connecters on the rear of this unit, LINE-level unbalanced ⑪ and MIC-
level balanced ⑫. Use shielded audio cable for the connection between this unit and the
mixer/amp or audio source. If the mixer/amp has a LINE IN phone jack (1/4", 6.3mm),
connect a cable from the 1/4"(6.3mm) unbalanced audio output ⑪ from the convertor to the
mixer/amp. If the mixer has a MIC IN XLR jack, connect a cable from the balanced XLR
audio output ⑫ from the convertor to the mixer/amp.
POW ER P WR POR T1 PORT 2 POR T3 POR T4 PO RT5 P OR T6 SYS TEM
C S
Gooseneck Microphone ConverterGMC-60
12 3 4 5 6 7 8 9
POR T1POR T2P ORT 3PO RT4POR T5P ORT 6LINK DC INLINE OU T BALAN CED
15V 4.3A
10 11 12 13 14 15 16 17 18 19