Graymills Immersion Liftkleen Connection Diagram

I've reviewed the connection instructions for the Liftkleen LKR36, LKR48, LKR60, LKD60, LKD72, and LKD84 parts washers. This document provides specific details on how to connect these models to the Turbo Boost Filtration System, including the necessary steps and connection points. I'm ready to answer any questions you have about this process.
What is the purpose of this document?

What should I do before connecting the filtration system?

What is provided for making the connection?

Graymills Corporation 3705 N Lincoln Ave Chicago, IL 60613 773-248-6825 fax 773-477-8673 [email protected] www.graymills.com

The information contained in this manual is intended to be accurate. However, the manufacturer retains the right to make changes in design which may not be included herein.

795-09525 GM0612

Connection Instructions

Liftkleen™ LKR36, LKR48, LKR60, LKD60, LKD72, LKD84

Connecting your Liftkleen Parts Washer to a Turbo Boost Fitration System

See Turbo Boost Filtration System Operations and Maintenance Instructions for basic guidelines in setting up the ﬁltration system.

This information is speciﬁc to the models mentioned above only. To attach the Turbo Boost Filtration System to this LiftKleen model,

follow instructions. Before starting up, ﬁll the parts washer according to the instruction manual that accompanies your speciﬁc

model.

View of tank top showing LiftKleen inlet.

Attach hose (provided) with clamps (provided) to

Turbo Boost intake.

LKR36