BMW N55 User manual

Brand: BMW

Model: N55

Category: Engine

Type: User manual

Revision Date:

N55 Engine

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Engine Components/Systems Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Te c h n i c a l Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Full Load Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Current Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Engine Designation and Engine Identification . . . . . . . . . . . . . . . . . . . . .11

Engine Designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Breakdown of N55 Engine Designation . . . . . . . . . . . . . . . . . . . . . . . .12

Engine Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Engine Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Engine Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Engine Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Crankcase and Bedplate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Crankshaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Crankshaft Main Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Pistons and Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Connecting Rod and Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Oil Pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Electrionic Volume-controlled Oil Pump . . . . . . . . . . . . . . . . . . . . . . . . . .23

Oil Pump and Pressure Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Oil Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Oil Filtration and Oil Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Oil Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Oil Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Oil Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Oil Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Cylinder Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Cylinder Head Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Crankcase Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Naturally Aspirated Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Boost Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Valvetrain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Intake and Exhaust Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Valve Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Subject Page

Table of Contents

Initial Print Date: 02/10

Camshafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Valve Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

VANOS System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

VANOS Solenoid Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Cam Sensor Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Valvetronic III . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Phasing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Masking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Combustion Chamber Geometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Valve Lift Adjustment Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Valvetronic Servomotor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Belt Drive and Auxiliarly Components . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Vibration Damper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Air Intake and Exhaust System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Air Intake System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Intake Manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Fuel Ta n k Ventilation System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Exhaust Manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Tu rbo c h arg e r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Function of the twin scroll turbocharger . . . . . . . . . . . . . . . . . . . .65

Diverter valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Catalytic Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Exhaust System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Vacuum System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Vacuum Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Fuel Injection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Fuel Pressure Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

High Pressure Fuel Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Fuel Injectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

N55, Cooling System Components . . . . . . . . . . . . . . . . . . . . . . . . . . .77

Oil Cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Coolant Passages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Engine Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

Circuit Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83

Engine Cooling Circuit Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Digital Motor Electronics (DME/ECM) . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Digital Motor Electronics Circuit Diagram . . . . . . . . . . . . . . . . . . . . . .88

N55, MEVD17.2 Circuit Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Subject Page

Fuel supply system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Fuel quantity control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Boost pressure control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Engine cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91

System Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

Crankshaft Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

Ignition Coil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94

Oil Pressure Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95

Oxygen Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95

Oxygen sensor before catalytic converter . . . . . . . . . . . . . . . . . . .96

Oxygen sensor after catalytic converter . . . . . . . . . . . . . . . . . . . . .96

Hot-film air mass meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97

High Pressure Fuel Injector Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97

Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

Cylinder Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

Cylinder Head Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

Fuel Injectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

Ignition Coils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

Subject Page

N55 Engine

Model: All with N55

Production: From Start of Production

After completion of this module you will be able to:

• Describe the features of the N55B30M0 engine

• Describe the specifications of the N55 engine

• Identify the internal and external components of the N55 engine

• Understand the function of the crankcase ventilation on the N55 engine

• Understand the function of the electronic volume control oil pump

N55 Engine

The N55 engine is the successor to the N54. Re-engineering and modifications have

made it possible to now use only one exhaust turbocharger. Against the backdrop of

reduced costs and improved quality, the technical data have remained virtually the same.

N55 Engine

Introduction

N55 Engine

Engine Components/Systems Overview

The following provides an overview of the features of the N55 engine:

Crankcase:

• Large longitudinal ventilation holes inter-connect the crankcase lower chambers

and relieve unwanted crankcase pressure between cylinders.

• Modified oil galleries enhance the supply of oil to vacuum pump.

Crankshaft: Is light weight design and has an asymmetric counterweight arrangement.

Pistons and connecting rods:

• A specially formed bushing/bore in small end of the connecting rods evenly

distributes the force of the pistons on the power stroke.

• Lead-free bearing shells are installed on the big-end of the connecting rods.

Cylinder head:

• Specially designed water passages intergraded into the cylinder head enhance

injector cooling.

• The combustion chambers are machined to work in conjuction with the Valvetronic

III system with regard to promoting air turbulence and mixture formation.

Crankcase ventilation:

• In contrast to the N54, the N55 crankcase ventilation does not use cyclone

separators.

• The cylinder and head cover have integrated blow-by passages that connect the

crankcase ventilation directly to the intake ports.

VANOS:

• The N55 VANOS oil passages are simplified compared to the N54 engine.

• The solenoid valves have integrated non-return valve and 3 screen filters.

• The VANOS units are of a lightweight design for increased adjustment speed

and have a reduced susceptibility to soiling.

Valvetrain:

• The N55 is the first BMW turbo engine to incorporate Valvetronic.

• The valvetrain is a new designed that combines Valvetronic III with Double VANOS.

• With Valvetronic III the 3rd generation brushless servomotor is introduced.

• The position detection sensor of eccentric shaft is now integrated in the servomotor.

N55 Engine

Oil supply:

• An enhanced and simplified oil circuit design is used.

• The inlet pipe, oil deflector, and oil collector are combined in one component.

• Oil pump uses a Duroplast slide valve and it is electronically controlled based on

a characteristic map within the engine management.

Forced induction:

• The N55 uses a single twin scroll turbocharger with vacuum operated,

electronically controlled wastegate valve.

• The electric diverter valve is intergraded into the turbocharger compressor housing.

Air intake and exhaust system:

• Air intake system is similar in configuration as the N54 with the exception of the

intake manifold and the use of a single turbo.

• The intercooler is an air to air type mounted in the lower area of the front bumper

cover.

• The exhaust system uses no underbody catalytic converter.

Vacuum system:

• The N55 engine has a two-stage vacuum pump as on the N54.

• The vacuum system has the vacuum reservoir built into the cylinder head cover.

Fuel injection:

• HDE (high pressure fuel injection) system is installed on the N55.

• The HDE system uses solenoid valve fuel injectors instead of the piezoelectric

type used on HPI.

• The high pressure pump and pressure sensors are similar in design and function

in both the HDE and HPI systems.

Digital Motor Electronics (DME):

• The DME is mounted on the intake manifold and cooled by intake air.

• The location of the DME facilitates the installation of the N55 engine in several

current BMW platforms/models.

N55 Engine

Te c hn i cal Data

Unit

N54B30O0 (E71/X6

xDrive35i)

N55B30M0

(F07/535i)

Configuration

6 inline 6 inline

Cylinder capacity

[cm³] 2979 2979

Bore/stroke

[mm] 84.0/89.6 84.0/89.6

Power output at

engine speed

[kW/bhp] [rpm] 225/306 5800 - 6250 225/306 5800 - 6400

Power output per liter

[kW/l] 75.53 75.53

Tor qu e at engine speed

[Nm] [rpm] 400 1300 - 5000 400 1200 - 5000

Compression ratio

[ε]

10.2 10.2

Valves/cylinder

4 4

Fuel consumption,

EU combined

[l/100 km] 10.9 8.9

CO2 emission

g/km 262 209

Digital Motor Electronics

MSD81 MEVD17.2

Exhaust emission

legislation, US

ULEV ULEV II

Engine oil specification

BMW Longlife-01 BMW

Longlife-01 FE BMW

Longlife-04

Top speed

[km/h] 240 250

Acceleration

0 - 100 km/h/62mph

[s] 6.7 6.3

Vehicle curb weight DIN/EU

[kg] 2070/2145 1940/2015

* = Electronically governed

N55 Engine

Full Load Diagram

Compared to its predecessor, the N55 engine is characterized by lower fuel consumption

with the same power output and torque data.

Full load diagram E90 335i with N54B30O0 engine

compared to the F07 535i with N55B30M0 engine

N55 Engine

Current Models

N54B30O0 engine variants

* The enhanced engine management system of the BMW Z4 sDrive35is and the 335is include

an electronically controlled overboost function to briefly increase torque under full load by

another 37 ft-lbs. This temporary torque peak of 369 ft-lbs gives the car a significant increase

in acceleration for approximately 5 seconds.

Model Version Series

Displace-

ment in

cm³

Stroke/

bore in

Power

output in

kW/bhp at

rpm

To rq u e i n

Nm at rpm

135i

US E82, E88 2979 89.6/84.0

300 SAE hp

5800 - 6250

407

(300 ft-lbs)

1400 - 5000

335i

E90, E92,

E93

2979 89.6/84.0

300 SAE hp

5800 - 6250

407

(300 ft-lbs)

1400 - 5000

335i xDrive

US E90, E92 2979 89.6/84.0

300 SAE hp

5800 - 6250

407

(300 ft-lbs)

1400 - 5000

335is

US E92, E93 2979 89.6/84.0

320 SAE hp

5800 - 6250

450

(332 ft-lbs)

1400 - 5000

Z4 sDrive35i

US E89 2979 89.6/84.0

300 SAE hp

5800 - 6250

407

(300 ft-lbs)

1400 - 5000

sDrive35is

US E89 2979 89.6/84.0

335 SAE hp

5800 - 6250

450

(332/369 ft-lbs)

*1400 - 5000

535i

US E60 2979 89.6/84.0

300 SAE hp

5800 - 6250

407

(300 ft-lbs)

1400 - 5000

535i xDrive

US E60, E61 2979 89.6/84.0

300 SAE hp

5800 - 6250

407

(300 ft-lbs)

1400 - 5000

X6 xDrive35i

US E71 2979 89.6/84.0

300 SAE hp

5800 - 6250

407

(300 ft-lbs)

1400 - 5000

740i

US F01, F02 2979 89.6/84.0

315 SAE hp

5800 - 6250

450

(330 ft-lbs)

1600 - 4500

N55 Engine

Engine Designation and Engine Identification

Engine Designation

This training material describes the N55B30M0 in detail.

In the technical documentation, the engine designation is used for unique identification of

the engine. In the technical documentation you will also find the abbreviated engine des-

ignation, i.e. N55, that only indicates the engine type.

Item Meaning Index / explanation

1 Engine developer

M, N = BMW Group

P = BMW Motorsport

S = BMW M mbH

W = Non-BMW engines

2 Engine type

1 = R4 (e.g. N12)

4 = R4 (e.g. N43)

5 = R6 (e.g. N55)

6 = V8 (e.g. N63)

7 = V12 (e.g. N73)

8 = V10 (e.g. S85)

3 Change to the basic engine concept

0 = basic engine

1 – 9 = changes, e.g. combustion process

Working method or fuel type and

possibly installation position

B = Gasoline, longitudinal installation

D = Diesel, longitudinal installation

H = Hydrogen

5 Displacement in liters 1 = 1 liter (whole number of liters)

6 Displacement in 1/10 liter 8 = 0.8 liter (tenth of liter)

7 Performance class

K = Smallest

U = Lower

M = Middle

O = Upper (standard)

T = Top

S = Super

8 Revision relevant to approval

0 = New development

1 – 9 = Revision

Breakdown of N55 Engine Designation

Engine Identification

The engines are marked on the crankcase with an engine identification code for unique

identification. This engine identifier is also required for approval by the authorities. The

N55 engine further develops this identification system and the code has been reduced

from previously eight to seven characters. The engine serial number can be found under

the engine identifier on the engine. To g e t h e r with the engine identifier, this consecutive

number enables unique identification of each individual engine.

Index Explanation

BMW Group Development

Straight 6 engine

Engine with direct injection, Valvetronic and exhaust turbocharger

Gasoline engine, longitudinal

3.0-liter capacity

Medium performance class

New development

Item Meaning Index / explanation

Engine developer

M, N = BMW Group

P = BMW Motorsport

S = BMW M GmbH

W = Non-BMW engines

Engine type

1 = R4 (e.g. N12)

4 = R4 (e.g. N43)

5 = R6 (e.g. N55)

6 = V8 (e.g. N63)

7 = V12 (e.g. N73)

8 = V10 (e.g. S85)

Change to the basic engine concept

0 = basic engine

1 – 9 = changes, e.g. combustion process

Working method or fuel type and

possibly installation position

B = Gasoline, longitudinal installation

D = diesel, longitudinal installation

H = hydrogen

Displacement in liters 1 = 1 liter (whole number of liters)

Displacement in 1/10 liter 8 = 0.8 liter (tenth of liter)

Typ e test concerns (changes that

require a new type test)

A = Standard

B – Z = Depending on requirement, e.g. RON 87

N55 Engine

N55 engine, engine identification and engine serial number

Index Explanation

08027053

Individual consecutive engine serial number

Engine developer, BMW Group

Engine type, straight 6

Change to basic engine concept, turbocharging, Valvetronic, direct fuel injection

Operating principle or fuel supply and installation position, petrol engine longitudinal

Displacement in 1/10 liter, 3 liter

Typ e approval requirements, standard

N55 Engine

Engine Housing

The engine housing consists of the engine block (crankcase and bedplate), cylinder

head, cylinder head cover, oil pan and gaskets.

Engine Block

The engine block is made from an aluminum die-casting and consists of the crankcase

with bedplate.

Crankcase and Bedplate

The crankcase features cast iron cylinder liners (2). A new feature is that the webs

between two cylinders on the deck of the block now have a grooved cooling passage

(3). Coolant can flow along these grooves from one side of the crankcase to the other,

thus enhancing cooling of this area.

Five oil return ducts on the exhaust side (4) now permit oil to return from the cylinder

head into the oil pan. These oil return channels extend into the bedplate up to below the

oil deflector. They help reduce churning losses as the returning engine oil can no longer

reach the crankshaft even at high transverse acceleration.

Five oil return channels on the intake side (5) also ensure that the blow-by gasses can

flow unobstructed from the crankshaft area into the cylinder head and to the crankcase

breather in the cylinder head cover.

The cooling duct (1) in the engine block is split and coolant flows directly through it.

Engine Components

N55 Engine

N55, crankcase with web cooling

Index Explanation

Cooling duct

Cylinder liner

Grooved cooling passage

Oil return ducts, exhaust side

Oil return ducts, intake side

N55 Engine

The crankcase has large longitudinal ventilation holes bored between the lower chambers

of the cylinders. The longitudinal ventilation holes improve the pressure equalization,

between the oscillating air columns that are created in the crankcase, by the up and down

movement of the pistons.

This enhances power by relieving the unwanted pressure that acts against the downward

movement of the pistons. It also enhances crankcase ventilation and adds to oil service

life by promoting the movement of blow-by gasses within the engine.

N55, ventilation holes in crankcase

N55 Engine

Crankshaft

The crankshaft of the N55 is of lightweight design, at 20.3 kg it’s approximately 3 kg

lighter than the crankshaft in the N54 engine.

The crankshaft is made from cast iron (GGG70). The counterweights are arranged asym-

metrically. There is no incremental wheel installed on the crankshaft. The timing chains

are mounted by means of an M18 central bolt.

N55 Crankshaft

Crankshaft Main Bearings

As on the N54 engine, the main bearings on the crankshaft are designed as two

component bearings free of lead. The thrust bearing is mounted at the fourth bearing

position.

Index Explanation

Counterweights

Main bearing journal 7

Oil hole from big-end bearing to main bearing

Oil hole from main bearing to big-end bearing

Big-end bearing journal, cylinder 4

N55 Engine

Pistons and Rings

A full slipper skirt type piston with a diameter of 82.5 mm is used. The first piston ring is a

plain rectangular compression ring with a chrome-ceramic coating on the contact surface.

The second piston ring is a tapered faced Napier type ring. The oil scrape ring is

designed as a steel band ring with spring that is also known as VF system.

N55 piston with piston rings

Index Explanation

Plain rectangular compression ring

Ta p e r e d faced Napier ring

VF system ring

Steel inlay for first piston ring

Groove for first piston ring

Groove for second piston ring

Groove for oil scraper ring

Hole for lubricating oil drain

Graphite coating

N55 Engine

Connecting Rod and Bearings

The size of the connecting rod of the N55 engine is 144.35 mm. A new feature is the

specially formed hole in the small end of the connecting rod. This formed hole is

machined wider on the lower edges of the wrist pin bushing/bore. This design evenly

distributes the force acting on the wrist pin over the entire surface of the rod bushing and

reduces the load at the edges, as the piston is forced downward on the power stroke.

N55, small end of the connecting rod

Index Explanation

Bushing

Connecting rod

N55 Engine

The following graphic shows the surface load on a standard connecting rod without the

formed hole. Due to combustion pressure, the force exerted by the piston via the wrist

pin is mainly transmitted to the edges of the rod bushing.

N54, connecting rod small end without formed hole

Index Explanation

Low surface load

High surface load

N55 Engine

Page is loading ...

BMW N55 User manual

Brand: BMW

Model: N55

Category: Engine

Type: User manual

Download PDF

report

BMW N55 User manual

BMW N55 User manual

Related papers

Other documents