Samsung SONOACE PICO User manual

Brand: Samsung

Model: SONOACE PICO

Category: Water pumps

Type: User manual

Samsung SONOACE PICO is a high-quality ultrasound imaging system designed to meet the needs of a wide range of clinical applications. With its advanced imaging capabilities and user-friendly interface, the SONOACE PICO is an ideal choice for both experienced and novice users.

Some of the key features of the SONOACE PICO include:

High-resolution imaging: The SONOACE PICO produces clear and detailed images, making it an excellent choice for a variety of applications, including abdominal, cardiac, obstetric, and vascular imaging.
Wide range of probes: The SONOACE PICO is compatible with a wide range of probes, allowing you to customize the system to meet your specific needs.

Some of the key features of the SONOACE PICO include:

High-resolution imaging: The SONOACE PICO produces clear and detailed images, making it an excellent choice for a variety of applications, including abdominal, cardiac, obstetric, and vascular imaging.
Wide range of probes: The SONOACE PICO is compatible with a wide range of probes, allowing you to customize the system to meet your specific needs.

Chapter 3

Setting

Application Selection & Probe Setting Change .............................................................. 3

Application Change................................................................................................................... 3

Probe Setting Change .............................................................................................................. 3

Editing Bodymarker .................................................................................................................. 4

Entering Patient Data ..................................................................................................... 6

Registering a New Patient ........................................................................................................ 6

Finding Patient Information....................................................................................................... 7

Modifying Patient Information ...................................................................................................9

Setting System ............................................................................................................. 10

Title ......................................................................................................................................... 10

Display .................................................................................................................................... 12

MISC. ...................................................................................................................................... 14

Setting Measurements ................................................................................................. 17

General ................................................................................................................................... 17

Obstetrics Measurement Setup .............................................................................................. 20

Fetal Echo Measurement Setup ............................................................................................. 24

Cardiac Measurement Setup.................................................................................................. 24

Urology Measurement Setup.................................................................................................. 25

Vascular Measurement Setup ................................................................................................ 26

Setting DICOM (Optional)............................................................................................. 27

DICOM Setup Method ............................................................................................................ 27

3 - 2 SONOACE PICO Operation Manual

DICOM Device Setup ..............................................................................................................28

Setting Option ...............................................................................................................30

Setting Peripheral Devices............................................................................................31

Setting Information........................................................................................................32

Utilities ..........................................................................................................................33

Application...............................................................................................................................33

Biopsy......................................................................................................................................34

B/W Post..................................................................................................................................36

Color Post................................................................................................................................38

Preset ......................................................................................................................................39

3D ............................................................................................................................................40

Miscellaneous..........................................................................................................................40

Chapter3. Setting 3 - 3

Application Selection & Probe Setting Change

Before scanning, select an application and change probe setting. Refer to ‘Chapter 8. Probe’ for

further information on available probes and applications in this product.

Press the [A] key on the alphanumeric keyboard, and an application window appears. You can

also choose the application by pressing the [Menu] dial button and selecting [Utility] from the

menu. You can select and change the applications and setting of the connected probe. If you

use the Two - probe connector, the probe can be selected as well.

[Figure 3.1 Application Window]

Application Change

1. After checking the currently selected probe, select an application using the Trackball

and Set button.

2. After selecting it, click Ok in the probe selection window. To cancel the selection, press

Cancel.

Probe Setting Change

While the probe settings are preset with the optimal values for each application, the user may

change the preset values using the following method.

3 - 4 SONOACE PICO Operation Manual

1. After checking the currently selected probe/application, change the probe setting

using the Trackball and Set button. Click Save to save the changed values.

2. Click Ok in the probe selection window. To cancel the selection, press Cancel.

3. Change the names of the user-definable settings other than ‘Default’ values using the

Rename.

To change the probe setting values, see ‘Utility’.

Editing Bodymarker

Press Bodymarker in the application window to bring up the bodymarker manager. Select

some bodymarkers to use in the system or change the order of bodymarkers.

[Figure 3.2 Bodymarker Manager]

‘Group’ shows system supporting bodymarkers with the application. Use Prev or Next to

display Bodymarkers of other applications.

‘User defined Bodymarker preset’ shows selected bodymarekrs.

▐ Add Bodymarkers

Select a bodymarker on ‘Group’ using the Trackball. Press Set button to add to the ‘User

defined Bodymarker preset’.

▐ Delete Bodymarkers

Select a bodymarker on ‘User defined Bodymarker preset’ using the Trackball. Press Set

button to delete.

Chapter3. Setting 3 - 5

▐ Change the order of Bodymarkers

Select a bodymarker on ‘User defined Bodymarker preset’ using the Trackball. Press Set

button to delete. With pressing the Change button on the control panel, move the position

using the Trackball. Release the Change button to finish changing the order.

▐ Back to default Bodymarker

Press the Default on ‘User defined Bodymarker preset’ to back to default Bodymarker.

▐ Delete all Bodymarkers

Press the Clear on ‘User defined Bodymarker preset’ to delete all bodymarkers. It deletes

bodymarkers only in ‘User defined Bodymarker preset’.

▐ Save Bodymarkers

Press the Save on ‘User defined Bodymarker preset’ to save current setting. When you press

the B button on the alphanumeric keyboard using the system, this setting will be displayed.

NOTE

Refer to `Chapter 6 Image managements’ for more information about

displaying Bodymarker.

3 - 6 SONOACE PICO Operation Manual

Entering Patient Data

Be sure that the patient information has been correctly entered before scanning.

The patient information includes basic information such as patient ID, patient name, birth date,

gender as well as other application specific data.

NOTE

Patient ID and name are mandatory information when registering a new

patient.

All patient data are classified according to the patient ID. If the ID is not entered, the Ok is not

activated. (Extra information can be entered when needed.)

Press the ID button on the control panel, and the Patient Information window appears. You can

[Figure 3.3 the Patient Information window]

Registering a New Patient

1. After clicking the New, enter the patient name, ID and other information using the

Trackball, Set button and keyboard.

– While Auto ID Creation is checked, click the New. A new Patient ID is

automatically provided by the system.

– When an existing ID is entered, the ID field icon changes to

2. After entering patient information correctly, click Ok. Or click Cancel to cancel.

Chapter3. Setting 3 - 7

Finding Patient Information

▐ Finding Patient Information using ID

Enter the Patient ID to change his or her information.

▐ Finding Patient Information using the Search Function

Click Search in the Patient Information window, and the Search window appears.

[Figure 3.4 Patient Search Window]

- Type in patient ID or name, and the list of registered patients appears.

- If there is no patient that satisfies the search key, the Select and Ok are not activated.

- To display all registered patients, click Show All. To select all patients on the list, click

Select All.

- To delete the ID and all other information of a registered patient, select the patient and

click Delete.

- To stop the search or close the current search dialog box, click Cancel or Close.

WARNING

If a patient ID is deleted, all related data and images stored in SonoView

are erased.

3 - 8 SONOACE PICO Operation Manual

▐ Finding Patient Information using Worklist

The system connects to the hospital’s DICOM Modality Worklist server and obtains

information on scheduled patients and examinations. Searching a patient by Worklist

allows you to enter the patient information automatically.

[Figure 3.5 Modality Worklist Window]

1. Press Worklist in the Patient Information screen and the Modality Worklist window will

appear. (If “Open MWL on Patient Key” is selected under the DICOM server settings,

pressing the Patient button opens the Modality Worklist window first.)

2. Select Worklist Server, enter one or more search conditions in “Search Criteria”, and

then press Search button. A list of scheduled patients that match the search conditions

will appear.

3. Select a patient and press OK. The patient information will appear.

4. Press the Close button to quit searching patients and close the Modality Worklist

window. If you wish to enter patient information directly without using Worklist data,

press Manual Entry.

NOTE

Use the DICOM tab in the Settings screen to select the Worklist

server. For more information, see “DICOM Settings.”

NOTE

ID, Name, Accession #, Birth, Age, or Gender cannot be changed

when entering patient information by using Worklist.

Chapter3. Setting 3 - 9

Modifying Patient Information

To modify information in the Patient Information window:

1. Modify the information using the Trackball, Set button and keyboard.

2. After modifying patient information correctly, click Ok. To cancel editing, click Cancel.

The Resume Exam will be turned on when the window opens to enter the patient ID after

acquiring the measurement data, if the ID has not been previously entered. Enter the patient ID

and press the Resume Exam to add the measurement data to the newly entered patient ID, or

press the Ok instead of the Resume Exam to discard the measurement data.

The Resume Exam is activated when there is a new calculation result. The button is also used

to add calculation results to another patient or a new patient.

NOTE

For more details on patient backup, see the ‘Information Management’

section in ‘Chapter 6. Image Managements’.

3 - 10 SONOACE PICO Operation Manual

Setting System

This mode is used for system settings. It does not affect image output. The setup may be

modified depending on specific needs or preferences.

1. Press the SetUp button on the keyboard.

2. Select System in the Setup menu.

3. Set the specific system values according to each item on the screen.

4. Press Ok to finish the setup. To close the screen, press Cancel or Close.

Title

To change the hospital name, and date/time, select the Title tab in the System menu as shown

above.

[Figure 3.6 Title setting]

■ Institution

Enter the name of the hospital/institution.

■ Date

Set the date and its format.

Chapter3. Setting 3 - 11

■ Time

Set the time and its format.

※ How to set the date and time

1. Click Set in the Title tab of System menu.

[Figure 3.7 Date/Time Setting]

2. Set the Date/Time using the Trackball and Set button.

3. After finishing setup correctly, click Ok. To cancel setup, click Cancel or Close.

3 - 12 SONOACE PICO Operation Manual

Display

To set the information about images and related data, select the Display tab in the System

menu.

■ Auto Freeze

After the preset time span (Minute) of inactivity, the scan mode is automatically

frozen.

■ Post Map

This sets the display of the Post Map in the Feedback section at the bottom of the

screen.

■ Image Info.

This sets the display of the image information on the screen e.g. 2D Gain, Power,

Dynamic Range, Frame Average.

■ TGC Line

This sets whether or not the TGC line is displayed. If ‘Off’ is selected, the TGC Line

is not shown. If ‘Off after 3 seconds’ is selected, the TGC value appears when a TGC

value is adjusted, but disappears after 3 seconds. If ‘On’ is selected, the TGC Line is

always shown.

■ 2D Image Size

The Image size can be set to 100%, 95% or 90%.

■ TI Display

The system sets TI values automatically. However, this menu allows the user to

choose manually from one of the three TI parameters as desired: Default, TIs or TIb.

■ Language

This sets the language to be used. English, Deutsch, Français, Español, and Italiano

are available. To display the screen in the selected language, reboot the system after

completing setup.

The keyboard layout setup is automatically updated.

■ Bodymarker After Freeze

Determine whether the system will automatically switch to the Body Marker mode

when the Freeze button is pressed. If it is set to ‘On,’ a Body Marker appears when

the Freeze button is pressed during scanning. If it is set to ‘Off,’ a Body Marker

appears when [B] is pressed during scanning.

Chapter3. Setting 3 - 13

■ Body Marker Position

When entering a Body Marker, set the position where the marker will appear. In the

thumbnail shown on the screen, set the initial position of the Body Marker by using

the Trackball and the Set button. Press Default to disable the setting and initialize

the position.

■ Cursor Position

When entering text, set the position where the cursor will appear. In the thumbnail

shown on the screen, set the initial position of the text cursor by using the Trackball

and the Set button. Press Default to disable the setting and initialize the position.

[Figure 3.8 Display setting]

3 - 14 SONOACE PICO Operation Manual

MISC.

[Figure 3.9 Misc. setting]

■ Boot Up Caps Lock Status

This is used to set up the default status of the Caps Lock after system booting. It is

normally set as ‘Off’. The Caps Lock function is used to enter capital letters even

when not pressing the Shift button on the keyboard. After setting, you have to

reboot the system.

■ Simultaneous Mode

This menu determines whether or not simultaneous mode is enabled in PW Spectral

Doppler Mode.

- ‘Off’: Select this if you do not wish use simultaneous mode.

- ‘Allow 2D/PW: Select this if you do not wish to use simultaneous mode in

2D/C/PW modes but do wish to use it in 2D/PW mode.

- ‘Allow 2D/C/PW: Select this to use simultaneous mode in 2D/PW modes and

2D/C/PW modes.

■ Brief Set

Select Brief Set to use the brief text function. Its default value is ‘Off’.

Using the brief text function allows fast and easy input of text statements. For

example, to enter the text ‘Tumor’, you only need to enter ‘Tu’ and the system will

search the word from the abbreviation list and automatically enter the word ‘Tumor’.

Chapter3. Setting 3 - 15

※ How to edit the Brief Set.

Press the Edit button on the screen. The Brief Table Edit table window will be

appeared. To add a new abbreviation, click New, and to completely delete an existing

abbreviation, click the entry to be deleted and then click Delete.

‘Delay(msec)’ sets seconds to input the full word after enter the abbreviation. The unit

value is msec, and 1000msec is 1second.

[Figure 3.10 Brief Set Edit]

■ Customizing Pop-up Menu

You can set up the system’s pop-up menus. Press User Defined to set up a pop-up

menu as desired. Press Default to return a pop-up menu to its initial state.

1. Press the Edit button. The Customizing Pop-up Menu screen will appear.

2. Select a menu to set up in Step 1. The selected menu will appear in Step 2.

3. Select item(s) to use in Step 2.

- Select item(s) by using the Trackball and the Set button, and press

- The selected item(s) will appear in Step 3.

- To delete item(s) in Step 3, press

3 - 16 SONOACE PICO Operation Manual

4. To change the order of items in Step 3, press or .

5. Press the Save button to save and finish settings. Press the Close button to

cancel.

[Figure 3.11 Customizing Pop-up Menu]

Chapter3. Setting 3 - 17

Setting Measurements

Select Measure in the Setup menu to set up measurement functions.

1. Press the SetUp button on the keyboard.

2. Select Measure in the Setup menu.

3. Set the specific system values according to each item on the screen.

4. Press Ok to finish the setup. To close the screen, press Cancel or Close.

General

Select the General tab in the Measure menu to set general measurement settings.

[Figure 3. 12 General Measurement Settings]

▐ General

Select General tab.

■ Measure Item Display Count

Select the number of measurement items to be between 1 and 4. If you select ‘Hide’,

measurement items are not displayed.

3 - 18 SONOACE PICO Operation Manual

■ Circ/Area Method

Select either the ‘Ellipse’ or ‘Trace’ caliper to be the default tool for measurement.

■ Default Volume Method

Select either the ‘3 Distance’, ‘1 Distance’ or ‘Distance + Ellipse’ items to be used as the

default tool in volume measurement.

■ Distance Method

Set either ‘Line’ or ‘Trace’ as the distance measurement method.

■ Caliper Display Unit

Set either ‘cm’ (centimeter) or ‘mm’ (millimeter) as the caliper display unit.

■ Trackball Speed

Set the Trackball speed to either ‘Fast’, ‘Medium’ or ‘Slow’.

■ Result Display

This menu sets up the output format of measurement results. When ‘Average Value’ is

selected, the average value of the last three measurement results is displayed on the

report. When ‘Last Measured Value’ is selected, the last measurement value is shown.

▐ Doppler

Select the Doppler tab in the General tab.

[Figure 3.13 Doppler Setting]

Chapter3. Setting 3 - 19

■ Y-Axis Unit

This sets the vertical (Y) axis unit in Spectral Doppler Mode.

■ Trace Direction

When Auto Trace and Limited Trace functions are used in Spectral Doppler Mode, this

sets the range of the measurement values.

■ Control Threshold

The trace threshold can be adjusted by rotating the Menu dial-button when tracing is

not finished after Auto trace / Limited trace.

■ Mean Trace

This menu specifies the use of Mean Trace Line on the screen for a frozen spectrum

trace.

※ How to change measure method under during measurement

Press the space bar after pressing the Calculator button to bring up the Setting

Measure Method window shown below.

[Figure 3.14 Setting Measure method]

▐ Report

Select the Report tab in the General tab.

3 - 20 SONOACE PICO Operation Manual

Select items to mark the header on the report. The header will be shown only the item has

its data.

[Figure 3.15 Report Setting]

Obstetrics Measurement Setup

To set up obstetrics related measurement, select the OB tab in the Measure menu.

[Figure 3.16 OB Measurement Settings]

Page is loading ...

Samsung SONOACE PICO User manual

Brand: Samsung

Model: SONOACE PICO

Category: Water pumps

Type: User manual

Some of the key features of the SONOACE PICO include:

High-resolution imaging: The SONOACE PICO produces clear and detailed images, making it an excellent choice for a variety of applications, including abdominal, cardiac, obstetric, and vascular imaging.
Wide range of probes: The SONOACE PICO is compatible with a wide range of probes, allowing you to customize the system to meet your specific needs.

Download PDF

report

Samsung SONOACE PICO User manual

Samsung SONOACE PICO User manual

Related papers

Other documents