Page is loading ...
User Manual
The color and the appearance may differ depending on the product,
improve the performance.
SBB-IS08E
IL015E IL020F IL025E
IS015F IS020F IS025F
Table of contents
Before Using the Product
Copyright 4
Safety Precautions 5
Electricity and Safety 5
Installation 6
Operation 7
Cleaning 8
Storage 8
Preparations
Parts 9
Reverse Side (SBB-IS08E) 9
Reverse Side (IL015E IL020F IL025E IS015F
IS020F IS025F) 10
Remote Control 11
Remote Control (SBB-IS08E model only) 13
Connection 14
Control Codes 15
Connecting and using devices
Before Connecting 19
Pre-connection Checkpoints 19
Connecting to a PC 19
Connecting to a Video Device 22
Connecting the LAN Cable 23
Installing the cabinets 24
Precautions when handling the cabinets 26
Restrictions when installing cabinets 26
Connecting to cabinets 27
connection for each input voltage 28
Changing the Input source 29
Source 29
Using LED Signage Manager
Home feature
Player 31
N Channel
Local Channel
N File
My Templates
Player
Player page Settings
When Content is Running 40
Player 42
Schedule 47
Schedule page 47
Template 49
Clone Product 52
ID Settings 53
Device ID
PC Connection C
Device ID Auto Set
Network Status 54
On/Off Timer 55
On Timer 55
Off Timer 56
Holiday Management 56
Ticker 57
More settings 58
URL Launcher 59
2
Table of contents
OSD (On Screen Display) menus
Screen Adjustment 60
OnScreen Display 63
Network 64
N Status 64
N Settings 64
Multimedia Device Settings 67
Server N Settings 67
Device Name 67
System 68
Support 71
Playing photos and
videos (Media Play)
Read the following before using media play
with a USB device 72
Using a USB device 74
Features provided in the media content list
page 75
Menu items in the media content list page 76
Available buttons and features during photo
playback 77
Available buttons and features during video
playback 78
Supported Subtitle and Media play file
formats 79
Supported image resolutions 79
Supported Video Formats 80
Requirements Before Contacting Samsung
Customer Service Center 82
Testing the Product 82
Checking the Resolution and Frequency 82
Q & A 88
Specifications
General 90
Preset Timing Modes 92
Appendix
Responsibility for the Pay Service
(Cost to Customers) 94
Not a product defect 94
customer's fault 94
Others 94
License 95
4
Copyright
© 2016 Samsung Electronics
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Before Using the Product
Chapter 01
5
Safety Precautions
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
Electricity and Safety
Warning
An electric shock or fire may result.
An unsecure connection may cause a fire.
Damage to the cord may result in a fire or electric shock.
A fire or electric shock may result.
A fire may result.
Caution
A fire or electric shock may result.
occurs.
the remote.
An electric shock or fire may result.
6
Installation
Warning
NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
A fire may result.
An increased internal temperature may cause a fire.
An increased internal temperature may cause a fire.
Keep the plastic packaging out of the reach of children.
Children may suffocate.
etc.)
oil, or smoke.
A fire or electric shock may result.
a kitchen or near a kitchen counter.
Caution
of the product is not protruding.
Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical
performance.
such a place.
7
Operation
Warning
yourself.
A fire or electric shock may result.
Contact Samsung Customer Service Center for repairs.
Damage to the cord may result in a fire or electric shock.
cord immediately and contact Samsung Customer Service Center.
An electric shock or fire may result.
Continued use can result in a fire or electric shock.
A fire or electric shock may result.
A fire or electric shock may result.
immediately.
Sparks can cause an explosion or fire.
An explosion or fire may result.
An increased internal temperature may cause a fire.
Center.
Product failure, an electric shock or fire may result.
the product.
Center.
Product failure, an electric shock or fire may result.
Caution
extended period of time (vacation, etc).
An electric shock or fire may result.
8
malfunction.
Do not use humidifiers or stoves around the product.
A fire or electric shock may result.
Store small accessories out of the reach of children.
damage due to leakage of the internal liquid.
at the same time.
a leakage of the internal liquid.
Cleaning
LED elements may fall off.
Storage
9
Parts
Preparations
Chapter 02
Reverse Side (SBB-IS08E)
Parts Description
IR
Using other display devices in the same space as the remote
inadvertently controlled.
Turn the product on or off.
Parts Description
SOURCE
Select the connected input source.
SERVICE
Dedicated to service technicians.
RJ45
USB
Connect to a USB memory device.
DP OUT
DVI IN
HDMI IN
DP IN
HDBT OUT
Connects to an IL015E, IL020F, IL025E, IS015F, IS020F or IS025F device,
DC 14V
10
Reverse Side (IL015E IL020F IL025E IS015F IS020F IS025F)
―
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Thumbscrew
Parts Description
DP OUT
Connect to the DP IN port on the next cabinet, using a DP cable.
DP IN
Connect to the DP OUT port on the previous cabinet, using a DP cable.
―
This port can be used if an issue occurs with the HDBT video signal.
UART OUT
Connect to the UART IN port on the previous cabinet.
UART IN
Connect to the UART OUT port on the first cabinet and the UART IN port
on the next cabinet.
―
This port can be used if an issue occurs with the HDBT control
signal.
HDBT OUT
Connect to the HDBT IN port on the previous cabinet.
HDBT IN
Connect SBB-IS08E to multiple cabinets, using the HDBT cable.
―
Refer to "Connecting to cabinets" on page 27 for details.
SWITCH
Select the connected input source (HDBT or DP).
LIGHT SENSOR
Connect to the external light sensor.
―
After initial installation and servicing, tightly fasten the thumb screws using the appropriate
tool.
11
–
may differ for different products.
Remote Control
Mute the sound.
Unmuting the sound: Press MUTE again or
Go to Home Launch Button.
Display or hide the onscreen display menu, or
return to the previous menu.
Change the input source.
Use this hotkey to directly access MagicInfo.
is connected.
12
source.
Confirm a menu selection.
Exit the current menu.
Manually select a connected input source
from DVI, HDMI, or DisplayPort.
Return to the previous menu.
It sets safe lock function.
Used in multimedia mode.
–
may differ for different products.
To place batteries in the remote control
pointing at the sensor on the front
of the product to perform the
corresponding function.
– Using other display devices in the
same space as the remote control
of this product can cause the other
controlled.
10 m from the sensor on the product at
from the left and right.
–
children and recycle.
–
the same time.
–
extended period of time.
Remote Control (SBB-IS08E model only)
Cable Connection
LAN Cable
Pin assignment
1 2 3 4 5 6 7 8
Pin No Standard Color Signal
1 White and orange
2 Orange TX-
White and green
4 Blue NC
5 NC
6 RX-
7 NC
8 NC
Connector : RJ45
Direct LAN cable (PC to HUB)
RJ45
RJ45 MDC
HUB
P1
P1P2
P2
Signal
P1 P2 Signal
1 <--------> 1
TX-
2 <--------> 2 TX-
<-------->
RX-
6 <--------> 6 RX-
14
Cross LAN cable (PC to PC)
RJ45
P1 P2
Signal
P1 P2 Signal
1 <-------->
TX-
2 <--------> 6 RX-
<--------> 1
RX-
6 <--------> 2 TX-
Connection
Connection 1
RJ45 HDBT OUT
HDBT IN
HDBT IN HDBT OUT
Connection 2
RJ45 HDBT OUT
UART INHDBT IN UART OUT
15
Control Codes
Viewing control state (Get control command)
Header Command ID Data length Checksum
0xAA Command
type
0
Controlling (Set control command)
Header Command ID Data length Data Checksum
0xAA Command
type
1 Value
Command
No. Command type Command Value range
1
Power control 0x11 0~1
2
Input source control 0x14 -
3
Screen mode control 0x18 -
4
Safety Lock 0x5D 0~1
• All communications take place in hexadecimals. The checksum is calculated by adding
up all values except the header. If a checksum adds up to be more than 2 digits as shown
below (11+FF+01+01=112), the first digit is removed.
E.g. Power On & ID=0
Header Command ID Data length Data 1 Checksum
0xAA 0x11 1 "Power"
Header Command ID Data length Data 1 12
0xAA 0x11 1 1
• To control all devices connected by a serial cable simultaneously irrespective of IDs, set
the ID as "0xFE" and transmit commands. Commands will be executed by each device but
ACK will not respond.
16
Power control
Function
Header Command ID Data length Checksum
0xAA 0x11 0
Header Command ID Data length Data Checksum
0xAA 0x11 1
Ack
Header Command ID Data length r-CMD Val1 Checksum
0xAA 0xFF 'A' 0x11
Nak
Header Command ID Data length r-CMD Val1 Checksum
0xAA 0xFF 'N' 0x11 "ERR"
Input source control
Function
Header Command ID Data length Checksum
0xAA 0x14 0
Setting the input source (Set Input Source)
Header Command ID Data length Data Checksum
0xAA 0x14 1 "Input Source"
0x0C Input source
0x20 MagicInfo
0x1F DVI_video
0x21 HDMI1
0x22 HDMI1_PC
0x25 DisplayPort
This model does not support HDMI1 and HDMI1_PC.
MagicInfoMagicInfo function.
17
Ack
Header Command ID Data length r-CMD Val1 Checksum
0xAA 0xFF 'A' 0x14 "Input
Source"
Nak
Header Command ID Data length r-CMD Val1 Checksum
0xAA 0xFF 'N' 0x14 "ERR"
Screen mode control
Function
Video Wall
Header Command ID Data length Checksum
0xAA 0x18 0
Header Command ID Data
length
Data Checksum
0xAA 0x18 1 "Screen
Mode"
"Screen Mode": A code that sets the product status
0x01 16 : 9
0x04 Zoom
Wide Zoom
0x0B
Ack
Header Command ID Data
length
r-CMD Val1 Checksum
0xAA 0xFF 'A' 0x18 "Screen
Mode"
"Screen Mode": A code that sets the product status
Nak
Header Command ID Data
length
r-CMD Val1 Checksum
0xAA 0xFF 'N' 0x18 "ERR"
18
Safety Lock
Function
Safety Lock function on or off on a product.
Header Command ID Data length Checksum
0xAA 0x5D 0
Header Command ID Data length Data Checksum
0xAA 0x5D 1 "Safety
Lock"
Ack
Header Command ID Data
length
r-CMD Val1 Checksum
0xAA 0xFF 'A' 0x5D "Safety Lock"
Nak
Header Command ID Data
length
r-CMD Val1 Checksum
0xAA 0xFF 'N' 0x5D "ERR"
19
Connecting and using devices
Chapter 03
Before Connecting
Pre-connection Checkpoints
Connecting to a PC
Connecting parts may differ in different products.
Connection using a DVI cable
DVI IN
DVI IN
20
Connection Using a DVI-HDMI Cable
DVI IN
Connection Using an HDMI Cable
HDMI IN
Connection Using an HDMI-DVI Cable
To properly display images from the computer that is connected to the product via an HDMI-DVI
PictureText under Picture Mode
SystemGeneralHDMI Hot Plug to Off
HDMI IN
/