RGBlink VSP5162pro Quick start guide

Category
Video converters
Type
Quick start guide
VSP 5162PRO Quick Start
VIEWSIZE THE WORLD
4K×1K output splicing resolution
Support different pixels mapping
Seamless switching between any inputs
Preview and program output separately
Cascade for sync mosaic
User-defined output resolution
Frame rate conversion supports 50Hz
and 60Hz
Improved media files player for USB
input with HD capacity
2 LED sending card install slot
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
1
CONTENT
Product Introduction ............................................................................................................................... 2
Packing Configuration ............................................................................................................................ 3
Hardware Orientation .............................................................................................................................. 4
Front Panel ......................................................................................................................................... 4
Back Panel ......................................................................................................................................... 5
Operating Instruction .............................................................................................................................. 6
Content ............................................................................................................................................... 6
How to Do Customized Output Resolution ................................................................................. 7
How to Program the Input Signal ................................................................................................ 7
How to Realize Single Image Switching ..................................................................................... 7
How to Set up the PIP ................................................................................................................. 8
How to Scale the Image .............................................................................................................. 9
How to Zoom the Image .............................................................................................................. 9
How to Realize the Screen Size Setting ................................................................................... 10
How to Realize the Text Overlay Setting .................................................................................. 11
How to Realize Mirror and Rotate Setting ................................................................................ 11
How to Realize 4K×1K Mapping ............................................................................................... 13
How to Realize Different Pixels Mapping.................................................................................. 13
How to Save the Parameter ...................................................................................................... 14
How to Load the Saved Parameter ........................................................................................... 14
Product Application ............................................................................................................................... 15
Single Image Preview and Program ................................................................................................ 15
Single Image Split and Preview ....................................................................................................... 16
Contact Information............................................................................................................................... 17
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
2
Product Introduction
VSP 5162PRO is the seamless switcher that
accepts a wide variety of video signals,
including analog RGB, Video, HDTV and
Digital video and graphic inputs.
It combines truly seamless, glitch-free
switching with advanced scaling technology
producing high quality, high resolution video
presentations. The VSP 5162PRO offers
seamless transition effects CUT and Fade
between the inputs switching, 4K×1K output
splicing and quick configuration local control
panel and remote control ports with free of
charge Window based software and open
protocol for system integration.
System Connection
RGBlink offers solutions to
demanding technical problems.
Any application questions, or
required further information,
please contact with our
customer Support Engineers.
VSP 5162PRO System Connection Diagram
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
3
Packing Configuration
Note: Chinese Standard, American Standard or European Standard power cord is option.
Power Cord
USB Disk
DB9 to RJ11
Cable
USB Cable
DVI HDMI 线
Certification
防静电袋
DVI-D Cable
Antistatic Bag
Screw Driver
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
4
Hardware Orientation
Front Panel
Button Instruction
ESC
Escape key
CUT
Seamless cut button
SEL
Enter key
FADE
Fade in fade out button
UP
Up arrow button
FREEZE
Freeze button
DOWM
Down arrow button
PIP
Single and double images switch button
LEFT
Left arrow button
SCALE
Scale button
RIGHT
Right arrow button
PRG
Program button
1~4
Program and preview signal
source button
MENU
Menu button
DVI3
DVI3 signal source button
BRT
Brightness button
SDI1
SDI1 signal source button
OUT
Output resolution selection button
BLK
Black button
LOAD
Load button
TP
Test pattern button
SAVE
Save button
TAKE
Seamless effect switch button
LCD Panel
Show operation menu items
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
5
Back Panel
Input Interface
1. 2. 3
CVBS Input BNC port
4. 5
VGA Input DB15 port
13. 14
Displayport Input port
15.16.17
DVI Input DVI-I port
18
3G-SDI input BNC port
19
SDI Loop Out BNC port
Other Interface
6
S. V. D. U Optional Module
7
Dial Switch
8
10/100M Interface RJ45
9
USB Interface
10
RS-232 Interface
11
Switch
12
Power IEC-3 port
Output Interface
20.21
DVI Output DVI-I port
22
VGA Output DB15 port
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
6
Operating Instruction
Content
How to Do Customized Output Resolution
How to Program the Input Signal
How to Realize Single Image Switching
How to Set up the PIP
How to Scale the Image
How to Zoom the Image
How to Realize the Screen Size Setting
How to Realize the Text Overlay Setting
How to Realize Mirror and Rotate Setting
How to Realize 4K×1K Mapping
How to Realize Different Pixels Mapping
How to Save the Parameter
How to Load the Saved Parameter
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
7
How to Do Customized Output Resolution
1. Push [MENU] button to enter the menu items, push the [UP/DOWN] button and choose <OUTPUT
FORMAT>, push the [SEL] button to confirm.
2. Push the [UP/DOWN] button and choose [CUSTOMIZED], push the [SEL] button to confirm.
3. Push the [SEL] or [LEFT/RIGHT] button, and choose the position that need to adjust. Then push the
[UP/DOWN] button to adjust the width.
4. Same operation for height and rate.
5. After adjust all the values, push the [SEL] button to enable VSP 5162PRO to output this resolution.
How to Program the Input Signal
1. Push any button of [1], [2], [3], [4] in Preview area, and choose the input signal.
2. Push [PRO] button, then finish the input signal program.
Note: If choose the same signal in Program and Preview area, the signal can not be programmed.
How to Realize Single Image Switching
VSP 5162PRO can realize seamless effects switch between two channels, choose the signal in
Preview area, then push [CUT] or [TAKE] button, the signal will be switched to LED display.
For example, switch the signal of channel 2 to LED display, first push the [2] button in Preview area,
then push the [CUT] or [TAKE] button, and the LED display will show channel 2 signal.
System default the switch time is 1 seconds for [TAKE] button, if need to adjust the fade in fade out time,
push the [FADE] button, then push the [UP/DOWN] or [LEFT/RIGHT] button for setting, and push the
[SEL] button to confirm. Push [TAKE] button again, the signal will be switched to the LED display with
the adjusted time.
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
8
User can also switch the signal by pushing the signal button in Program area, but the signal in monitor
will not change.
How to Set up the PIP
Push the [PIP] button, the button led light turn on, and enter the PIP function menu. Choose <PIP>,
and set <ON> to enable the PIP function.
LAYOUT: Can choose PIP layout, the corresponding results are as follows:
PIP L+T PBP L+R PBP T+B
ALPHA: Can set the image transparency, the regulating range is among 0 to 128.
SWAP IMAGE: It can set PIP to swap exchange, when choose ON, it can realize the IMAGE A and
IMAGE B exchange.
SELECT: Can choose to set the size or position of IMAGE A or IMAGE B individually.
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
9
How to Scale the Image
1. Push the [SCALE] button, and enter the SCALE menu items.
2. Push the [UP/DOWN] button to choose the items that need to adjust, push the [SEL] button to
confirm.
3. Push the [SEL] or [LEFT/RIGHT] button to choose the position that need to adjust, and adjust the
setting values by pushing the [UP/DOWN button], push the [SEL] button to confirm.
SCALE menu are as follows:
H SIZE: Width setting.
V SIZE: Height setting.
H POS: Horizontal position setting.
V POS: Vertical position setting.
RESET: If image quality distorts by improper operation, it can be recover by reset.
How to Zoom the Image
1. Push the [MENU] button, and enter the menu item.
2. Push the [UP/DOWN] button and choose <INPUT SETUP>, push the [SEL] button to confirm.
3. Choose <ZOOM>, push the [SEL] button to confirm, settings are as follows:
V UP: Enlarge the image from the bottom.
V DOWN: Enlarge the image from the top.
V UP/DOWN: Enlarge the image to the top and the bottom.
H LEFT: Enlarge the image from the right.
H RIGHT: Enlarge the image from the left.
H LEFT/RIGHT: Enlarge the image to the left and the right.
CENTER: Enlarge the image from the center.
RESET: If image quality distorts by improper operation, it can be recover by reset.
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
10
How to Realize the Screen Size Setting
VSP 5162PRO supports the screen parameters to meet the requirement where user want to switch
between scale screen size and full display size (like monitor). This is only enable for a single display
window. Following is an example of a screen size is1408 x 832.
Operator can defined the VSP 5162PRO output resolution from standard output resolution list or
customized the output resolution which is higher than 1408 x 832. For this application 1440x900 is an
example:
Push the [MENU] button to go into the menu items, turn the knob and choose <SCREEN
PARAMETERS>, push the knob and goes into the screen menus as following:
SCREEN H SIZE--Horizontal pixels, turn knob or use the digital button to input the value1408.
SCREEN V SIZE--Vertical pixels, turn knob or use the digital button to input the value 832.
SCREEN H POS--Horizontal position, default value is 0, set the value as the way of H SIZE and V
SIZE.
SCREEN V POS--Vertical position, default value is 0, set the value as the way of H SIZE and V SIZE.
MODE-- Mode option, choose SCREEN SIZE.
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
11
How to Realize the Text Overlay Setting
Before setting the text overlay, please make sure the input channel of the text. For example, choose
DVI3, the operations are as follows:
1. Choose the image input signal in Preview area, for example, choose SDI1.
2. Push the [MENU] button, push the [UP/DOWN] button and choose <SYSTEM> option, push the
[SEL] button to confirm. Again push the [UP/DOWN] button and choose <DSK SETUP> option,
choose <DSK> and set “ON” to enable the DSK function.
3. Push the [UP/DOWN] button and choose <SELECT INPUT>, push the [SEL] button to confirm,
choose the text input signal, for example, choose DVI3.
4. Set the size and position of DVI3: Push the [DVI3] button in Preview area, the button light is on, and
the image can be edited, push the [SCALE] button to set the size.
5. Push the [MENU] button, push the [UP/DOWN] button and choose <SYSTEM> option, push the
[SEL] button to confirm. Again push the [UP/DOWN] button and choose <DSK SETUP> option. Push
the [UP/DOWN] button and choose <PRESET>, push the [SEL] button to confirm, choose the preset
mode, for example, WhOnBk2, push the [SEL] button to confirm.
6. Push the [SAVE] button, and save the above settings.
How to Realize Mirror and Rotate Setting
1. Push the [MENU] button, and enter the menu items.
2. Push the [UP/DOWN] button, choose <INPUT SETUP>, push the [SEL] button to confirm.
3. Push the [UP/DOWN] button, choose <MIRROR AND ROTATE>, push the [SEL] button to confirm.
PROGRAM 90 ROTATE: Push [LEFT/RIGHT] button, user can choose NO ROTATE, LEFT ROTATE
and RIGHT ROTATE.
LEFT ROTATE:
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
12
RIGHT ROTATE:
PROGRAM MIRROR: Push [LEFT/RIGHT] button, user can choose NO MIRROR, H MIRROR, V
MIRROR and IMAGE MIRROR.
H MIRROR:
V MIRROR:
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
13
How to Realize 4K×1K Mapping
1. Connect the input signals that will map.
2. Push the [MENU] button to enter to the menu items, push the [UP/DOWN] button, and choose
<SPLIT>.
3. Push the [SEL] button to confirm. Push the [LEFT/RIGHT] button, choose “ON”, and enable the split
function.
4. Push the [UP/DOWN] button, choose <HORIZONTAL 1/2>, push the [SEL] button to confirm.
5. Set H TOTAL as 4096, V TOTAL as 1152, FIRST WIDTH as 2048, and 4K×1K mapping is finished.
How to Realize Different Pixels Mapping
1. Push the [MENU] button to enter to the menu items, push the [UP/DOWN] button, and choose
<SPLIT>.
2. Push the [SEL] button to confirm. Push the [LEFT/RIGHT] button, choose “ON”, and enable the split
function.
3. Push the [UP/DOWN] button, choose split mode, push the [SEL] button to confirm.
4. Push the [SCALE] button, and enter to the split image.
5. Choose the split image that need to scale, push the [SEL] button to confirm.
6. Scale the split image according to actual need.
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
14
How to Save the Parameter
1. VSP 5162PRO provides 13 kinds of save modes. After setting, push SAVE button, the LED light
flashes, and enable the save function.
2. Push the [LEFT/RIGHT] button to select the location that need to save, for example, save to SAVE2,
choose SAVE2, and push the [SEL] button to confirm.
How to Load the Saved Parameter
1. VSP 5162PRO provides 13 kinds of load modes. Push LOAD button, the LED light flashes, and
enable the load function.
2. Push LEFT/RIGHT button to select the location that need to load, for example, load from
SAVE1, choose SAVE1 and push the [SEL] button to confirm.
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
15
Product Application
Single Image Preview and Program
Choose the signal in Preview area in the front panel, user can preview the signal on the monitor. After it
has been confirmed, switch the signal to LED display by pushing [CUT] or [TAKE] button, and then the
monitor signal has been switched to LED display signal.
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
16
Single Image Split and Preview
User can do split with VSP 5162PRO, it supports HORIZONTAL 1/2 and VERTICAL 1/2.
AddressS603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
17
Contact Information
Warranty:
All video products are designed and tested to the highest quality standard and backed by
full 3 years parts and labor warranty. Warranties are effective upon delivery date to
customer and are non-transferable. RGBlink warranties are only valid to the original
purchase/owner. Warranty related repairs include parts and labor, but do not include
faults resulting from user negligence, special modification, lighting strikes,
abuse(drop/crush), and/or other unusual damages.
The customer shall pay shipping charges when unit is returned for repair.
Headquarter: S603~604 Weiye Building Torch Hi-Tech Industrial Development Zone
Xiamen, Fujian Province, P.R.C
Tel: +86-592-5771197
Fax: +86-592-5771202
Customer Hotline: 4008-592-315
Web:
~ http://www.rgblink.com
~ http://www.rgblink.cn
E-mail: support@rgblink.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

RGBlink VSP5162pro Quick start guide

Category
Video converters
Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI