Mettler Toledo MD/ME/MES/KD/KE/KES Installation guide

Mettler Toledo
Brand
Mettler Toledo
Model
MD/ME/MES/KD/KE/KES
Type
Installation guide
lenght
width
height
Standard equipmentStandard equipment
Standard equipmentStandard equipment
Standard equipment
2 Pit angle, lengthwise
2 Pit angle, crosswise
4 Hex bolts M12x30 DIN 933
4 Nuts M12 DIN 934
1 Pit construction diagramm
8 Climping plates by KES/MES
6 Climping plates by KD/MD/KE/ME
Pit construction diagramm 00703609D
Dry pit (part 2)
KD/MD/KE/ME/KES/MES - line
1. Determine location of weighing platform
4. Concrete forming
3. Prepare framework pit
Pit construction diagram
00703609D
METTLER TOLEDO MultiRange
Dry pit (part 1)
KD/MD/KE/ME/KES/MES - line
Subject to technical changes © Mettler-Toledo (Albstadt) GmbH Printed in Germany 05/04 english
Load-bearing capacity of pit base:
min.1700kg / 25cm
2
2. Determine location of terminal
Detail Z
ZZ
ZZ
Z
Set up terminal to
ensure good access.
Length of connection cable
terminal 5 m (standard).
Dimensions pit frameDimensions pit frame
Dimensions pit frameDimensions pit frame
Dimensions pit frame
5. Dimension drawings
5.1 Dry pit
Dimensions in cm
Excavate framework pit as specified in the table below, depth approx. 25 cm.
Excavate channel of depth approx. 23 cm for cable conduit.
The cable conduit ends in the base of the pit (see illustration).
Pipe diameter min. 4 cm.
Do not use a right-angled pipe, rather two pipes of 45°
6
60
60
length x width
25
min. 4
AA
AA
A
150
150
AA
AA
A
width
length
supporting surface
min. 4
cross section A-Across section A-A
cross section A-Across section A-A
cross section A-A
cable conduit
height
weighing platform lenght x width x height
KD/MD 127 x 102 x 20
KE/ME 152 x 127 x 20
KES/MES 152 x 152 x 22
weighing platform length x width
KD/MD 165 x 140
KE/ME 190 x 165
KES/MES 190 x 190
a) Prepare stable wooden frame.
Check that the frame is rectangular.
Check diagonal. Dimensions see table.
b) Assemble steel pit frame, and fasten to
wooden frame with nails.
c) Install wooden frame together with pit frame
in the framework pit. The pit frame must be
leveled exactly.
Position for cable conduitPosition for cable conduit
Position for cable conduitPosition for cable conduit
Position for cable conduit
ideal
possible
weighing platform length x width
KD/MD 127 x 102
KE/ME 152 x 127
KES/MES 152 x 152
  • Page 1 1

Mettler Toledo MD/ME/MES/KD/KE/KES Installation guide

Mettler Toledo
Brand
Mettler Toledo
Model
MD/ME/MES/KD/KE/KES
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents