Identification:
Technical Bulletin:
Date:
Issuer:
Factory:
D02-D03-D04-D05
CGX2007-24 (page 1 of 2)
19 December 2007
R. Sartor (DWS Customer Support)
CGX – Dishwashing – Pordenone (I)
Subject
User Interface in UC, FL, HT and PW
Model
Undercounter LS5 / WT4 and LS6E / WT30E, Front Loading LU7 / WTU40,
Hood Type LS10EA-14EA / WT65E and Pot&Pan Washer PW1M-2M /
WT830M-850M / WT830EA-850EA.
Problem
Dead or not starting cycle.
Reason
Moisture or broken switch (push button)
Action in
Factory
From serial number 74900001 (for UC) / 75000001 (for FL, HT and Automatic
P&PW) we have introduced plastic box with embedded extensions for
switches:
Painted UI Tall switch Plastic actuactor
Painted UI + plastic box Short switch Integrated plastic actuactor
ELECTROLUX PROFESSIONAL SPA
MAILING ADDRESS TELEPHONE WEBSITE VAT NO.
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
++39 0434 380650 www.electrolux.com 00072220932
OFFICE ADDRESS TELEFAX E-MAIL ADDRESS
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
++39 0434 380636
++39 0434 385646
Share more of our thinking at www.electrolux.com
Technical Bulletin (User Interface).doc
LS9 / WT55 machines have not been involved in this change since their user
interface will be soon out of production (LS14 / WT65 and LS9 / WT55 will
have the same user interface).
WHERE
OLD code
(RoHS compliant)
NEW code
(user interface + plastic box)
NEW code
(user interface only)
NEW code
(plastic box only)
PW1-2 / WT830-850
not available yet
Not available yet Not available yet
WT65
WT830EA-850EA
0L1240
LS14EA
0L1237
0L1627
(UI 0L1566 + PB 0L1568)
0L1566
(user interface only)
0L1568
(plastic box only)
LS5 / WT4 &
LS6E / WT30E
(Until s/no. 52300099)
0L1242
not available
not available not available
LS5 / WT4 &
LS6E / WT30E
(From s/no. 52400001)
LS5WS / WT4WS
0L1241
0L1626
(UI 0L1565 + PB 0L1567)
0L1565
(user interface only)
0L1567
(plastic box only)
LS9 / WT55
0L1235
not available
not available not available
For time being the new user interface 0L1627 does not fit in Front Loading
Pot&Pan Washer machines because of interference with studs. A new frontal
panel will be soon released.
Action in
Field
New user interfaces with plastic box are interchangeable towards old user
interfaces unless by taking away all plastic extensions 002670 and all brass
spacers 088653 from machines with old user interface.
Be aware that new user interfaces cannot be used without the plastic
box. Therefore new user interfaces without plastic box are NOT
interchangeable towards old user interfaces.
However you don’t need to replace user interface and plastic box in case of
failure so also spare part codes for new user interface without plastic box are
available (see table above).
Remove brass spacers to fit new
user interface with plastic box
Share more of our thinking at www.electrolux.com
2
/
