LG 32LT662MBUC Installation guide

INSTALLATION MANUAL

LED TV*

Please read this manual carefully before operating your set

and retain it for future reference.

UT64**

UT34**

UT66**

UT56**

UT57**

LT66**

www.lg.com

ENGLISH

2

Table of contents

3 Location and Function of Controls

3 Parts and Button

3 Basic functions

4 First Use Wizard

5 Basic Settings

5 - Language & Location

6 - Network Settings

7 - Portal Settings

8 - Voice Service Coverage

9 Data Cloning

9 Solution Settings

9 - Language & Location selection

10 - Automatically for Setup

14 - Manually for Setup

17 Installation Menu Settings

18 Installation Menu

18 Introduction

19 Public Display Settings

19 - Public Display Settings Operation

19 - Power On Status

20 - Volume

20 - Key Management

21 - Limited Mode

22 - DTV Channel Update

22 - Power On Default

22 - Aux Source Setting

22 - Power Management

22 - Factory Reset

23 Network

23 - MAC Address

23 - Network Setting

24 - LG Connect

24 - IP Stream Control

24 - Wake On LAN

24 - VLAN ID

24 - Server Settings

25 - Ping Test

26 Pro:Centric

26 - Mode

26 - Update Event

26 - Room Number Setting

26 - Media Type

27 - Receive Data

28 General

28 - Configuration Setup

31 - External Speaker

32 - Set ID Setup

32 - Power Saving

33 - HCEC Setup

34 - Clock Setup

34 - Password Change

34 - Lock Mode

35 - Welcome Video Mode

35 - Crestron

35 - Developer Mode

35 Portal Settings

35 - Portal Mode

36 - Auto Start

36 - PreLoaded App

36 - Website Shortcut

36 - Input Shortcut

36 - Hotel Directory

37 - Portal Editor

37 - Portal Manager

39 Media Share

39 - SmartShare

39 - Screen Share

39 - Media Renderer

39 - DIAL

39 - TV Name

39 - SoftAP

41 - Beacon

42 TV Manager

42 - Diagnostics

47 - USB Download Menu

52 CONTENT MANAGER

52 - Web Login

52 - Content Manager

56 - Group Manager 2.0

58 IR Codes

59 External control device Setup

59 RS-232C Setup

59 Phone jack Type

59 Type of Connector : D-Sub 9-Pin Male

60 RS-232C Configurations

60 Communication Parameters

60 IR OUT Using Guide

60 - Suitable / Not Recommend remote-controller data

format

60 - IR Receiver specifications

61 Command Reference List

61 Transmission / Receiving Protocol

ENGLISH

3

Location and Function of Controls

Parts and Button

Basic functions

Power On (Press)

Power O

1

(Press and Hold)

Menu Control (Press

2

)

Menu Selection (Press and Hold

3

)

1 All running apps will close.

2 You can access and adjust the menu by pressing the button when TV is on.

3 You can use the function when you access menu control.

ENGLISH

4

First Use Wizard

* Image shown may differ from your TV.

(Depending on model)

• There are four options - Basic Settings, Data Cloning, Solution Settings, and Installation Menu Settings. Each menu can access by

START button.

ENGLISH

5

Basic Settings

* Image shown may differ from your TV.

This menu is for basic settings related to language, network, portal, voice service coverage and channel tuning without SI (Pro:Centric) setting. There

are four steps for it.

Language & Location

(Depending on model)

• Select the Language and Country. Some countries need to select the Time Zone.

ENGLISH

6

Network Settings

(Depending on model)

• Set Network connection. You can connect easily to wired/wireless network. (“Network Settings” on page 6)

ENGLISH

7

Portal Settings

(Depending on model)

• Set the Portal Mode and Portal Auto Start.

Portal Mode

(Depending on model)

• You can select ‘Default Portal’ (Use webOS default portal), ‘Customizable Portal’ (Use editable Portal), or ‘None’ (Do not use portal).

Portal Auto Start

• You can select ‘On’ or ‘O’. If you select ‘On’, Portal (Home Launcher) will be execute automatically after TV on.

ENGLISH

8

Voice Service Coverage

(Depending on model)

• Set the voice service coverage. You can set LG Service Country and Service Area Postcode for voice service.

ENGLISH

9

Data Cloning

(Depending on model)

Access Data cloning menu of TV Manager application for applying cloning le.

Solution Settings

(Depending on model)

The Pro:Centric Platform enables you to simply install, manage and use guest-centric solutions. The default Domain “procentric.local” and IP Server

Address are needed to be registered in DNS TV will contact the IP Server using the default Domain “procentric.local” via IP on server search page. If TV

doesn’t contact the Server, TV will search the pre-dened channel earlier than all channels.

Language & Location selection

(Depending on model)

• Please select the Language and Country. Some countries need to select the Time Zone.

ENGLISH

10

Automatically for Setup

(Depending on model)

1 From the TV Conguration Options screen, you can choose how to proceed with the conguration of this TV. Whether you will congure the TV

for Pro:Centric operation via the wizard or use a USB memory device to congure the TV, you may rst wish to set the Room Number on the TV.

Also, you can congure the network environment.

• Complete initial download of maintenance(On/O Toggle): you can choose the option whether to skip the maintenance les download during

the EZ-Manager process.

• If you intend to set Room Number as part of the TV conguration, use the Room Number option to assign the Room # for this TV before you

continue with additional conguration.

• In the Label eld, use the Left/Right arrow keys to specify a North, South, East, or West designation for this TV.

• In the Room Number eld, you can use the number keys on the Installation Remote to direct enter a room number or use the virtual keyboard

on the TV screen.

ENGLISH

11

• If you intend to apply the les via USB, use USB Conguration option to access TV Manager app. (“TV Manager” on page 42)

• To continue, move and select NEXT.

• If you intend to set network, use the Network Settings option. You can connect easily to wired/wireless network by this option. (“Network

Settings” on page 6)

ENGLISH

12

2 This step automatically searches for the Pro:Centric Server. If was found the Pro:Centric data channel, select the NEXT.

ENGLISH

13

3 Downloading the Pro:Centric application les takes few minutes.

4 After the installation is completed, the following screen will be displayed.

ENGLISH

14

Manually for Setup

(Depending on model)

1 Select a Label and/or enter the Room Number using the numeric keypad on the remotes or using the virtual keyboard on the TV screen. To

continue, move and select NEXT.

2 Please select the MANUAL PRO:CENTRIC.

ENGLISH

15

3 Congure the appropriate Pro:Centric settings in the TV.

ENGLISH

16

4 Downloading the Pro:Centric application les takes few minutes.

ENGLISH

17

5 After the installation is completed, the following screen will be displayed.

Installation Menu Settings

Access Installation menu for commercial feature settings.

ENGLISH

18

Installation Menu

* Image shown may differ from your TV.

Introduction

The abundant functions for Hotel TV linked with software installation can be projected on OSD as ‘Installation Menu’.

The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV’s easy installation and convenient

operation for Hotelier and System Integrators.

1 Press the Setting button for more than 5 seconds using the user remote control, banner will appear at top left on the screen.

2 Enter a four digit password and press ‘OK’ button.

-

The TV is set with the initial password “1-1-0-5”.

ENGLISH

19

Public Display Settings

-

When ‘Public Display Mode’ is set to On, all functions of Public Display Mode apply.

Public Display Settings Operation

-

Decide to work all functions of ‘Public Display Mode’ or not

-

When ‘Public Display Mode’ is set to Off, all functions of Public Display Mode Do Not apply.

Power On Status

-

Decide to select working status of TV Set when turn on main power.

-

You can select PWR, STD, LST.

-

PWR always make TV set On status when turn on main power .

-

STD make Stand-by status when turn on main power.

-

LST make TVSet work like previous power status. As same concept as Power Backup mode; If main power were turned off in Power On

status, TVSet would work in On status. If main power were turned off in Stand-by status, TVSet would work in Stand-by status.

-

If there Block All is both IR Operation and Local Key Operation from Key Management, In order to provide the Option that must be able

to turn on the TV in the TV turned off situation, change the value of the PWR. (Reference the Key Management)

ENGLISH

20

Volume

-

Decide to apply volume policy of ‘Start Volume’, ‘Maximum Volume’ and ‘Minimum Volume’ as On or Off.

-

(0 ≤ Min ≤ Start ≤ Max ≤ 100)

Start Volume

• This entry sets the start volume level when is power on.

-

The level is specified as a number between minimum volume to maximum value. (Min ≤ Start ≤ Max)

-

The default setting is ‘Off’.

-

When selected to 'On', if the value is lower then the minimum specified in the minimum volume entry, the minimum volume entry must

be used.

-

When selected to 'On', if the value is larger then the maximum specified in the maximum volume entry, the maximum volume value

must be used.

-

Access to a volume in ‘Timer Power On’ must be fixed to start volume when ‘Public Display Mode’ (On) and ‘Start Volume’ (Off, 0 ~ 100)

were set simultaneously.

Maximum Volume

• This entry sets the maximum volume level the set. The level is specied as a number between ‘Minimum Volume’ to 100. (Min ≤ Max ≤ 100).

-

The default value is 100.

Minimum Volume

• This entry sets the minimum volume level the set. The level is specied as a number between 0 to ‘Maximum Volume’. (0 ≤ Min ≤ Max)

-

The default value is 0.

Key Management

-

Manage key usability of Local(Front) Key and Remote Control. When selected to ‘On’, following ‘IR Operation’ and ‘Local Key Operation’

will be worked by below.

IR Operation

• Decide whether work the LG remote control or not.

-

When ‘IR Operation’ is set to ‘Normal’, all remote keys are available.

-

‘Use PWR Only’ makes block all remote keys except power key.

-

When ‘IR Operation’ is set to ‘Block All’, all normal remote keys don’t work.

Local Key Operation

• Decide to operate ‘Local Key’ working behavior.

-

When ‘Local Key Operation’ is set to ‘Normal’, all local keys are available.

-

‘Use PWR Only’ makes block all local keys except power key.

-

When ‘Local Key Operation’ is set to ‘Block All’, all local keys don’t work.

Page is loading ...

LG 32LT662MBUC Installation guide

LG 32LT662MBUC Installation guide

Related papers

Other documents