LCD Display Monitor
User’s Guide
TD-X461M
06/15
TD-X461M
ii
Dear Customer,
Thank you for purchasing this Toshiba LCD Display Monitor. This
document will help you use the many exciting features of your
new LCD Display Monitor. Before operating your LCD Display
Monitor, carefully read this manual completely.
Safety Precautions
CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
RISK OF ELECTRIC SHOCK DO
NOT OPEN.
CAUTION: TO PREVENT ELECTRIC SHOCK. DO NOT REMOVE THE ENCLOSURE. NO
USER-SERVICEABLE PARTS INSIDE.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING: If you decide to wall mount this monitor, always
use a mounting bracket that has been Listed by an
independent laboratory (such as UL, CSA, ETL) and is
appropriate for the size and weight of this monitor. The use of
inappropriate or non-Listed mounting brackets could result in
serious bodily injury and/or property damage.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5)
Do not use this apparatus near water.
6)
Clean only with dry cloth.
7)
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8)
Do not install near any heat sources such as radiators, heat
produce heat.
9)
Do not defeat the safety purpose of the grounding type plug.
A grounding type plug has two blades and
a third grounding prong. The third prong is
provided for your safety. If the provided
an electrician for replacement of the
obsolete outlet.
10)
Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Grounding prong
11)
manufacturer.
12)
Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
.
Additional Safety Precautions
13) CAUTION:
If the monitor is dropped and the cabinet or enclosure
surface has been damaged or the monitor does not operate
normally, take the following precautions:
ALWAYS turn off the monitor and unplug the power cord to avoid
NEVER allow your body to come in contact with any broken
glass or liquid from the damaged monitor. The LCD panel inside
the monitor contains glass and a toxic liquid. If the liquid comes in
contact with your mouth or eyes, or your skin is cut by broken
glass, rinse the affected area thoroughly with water and contact
your doctor immediately.
ALWAYS contact a service technician to inspect the monitor any
time it has been damaged or dropped.
14)
CAUTION:
To reduce the risk of electric shock, do not use the polarized plug
with an extension cord, receptacle, or other outlet unless the
blades can be inserted completely to prevent blade exposure.
To prevent electric shock, match wide blade of plug to wide slot;
fully insert.
15)
CAUTION:
Do not let children swallow any small parts included on or with
the product or play with the plastic bag. Keep the small parts and
the plastic bag out of the reach of children.
16)
CAUTION:
Do not let water or other liquids come into contact with the
product, as it may result in damage.
17)
WARNING:
away from this product at all times.
such as a heater. This may reduce the product life time or result
Installation, Ergonomics, Care, and Service
Installation
Follow these recommendations and precautions and
heed all warnings when installing your monitor:
18)
When operating the LCD display with its AC 220 - 240 V power
supply in Europe, use the power supply cord provided with the
monitor. If a power cord is not supplied with this monitor, please
TD-X461M
iii
contact your supplier. This equipment requires an Earthed mains
supply connection.
19)
In UK, use a BS-approved power cord with molded plug having a
black (10 A) fuse installed for use with this monitor.
20)
When operating the LCD display with a 120V, 60Hz AC power
supply in the United States or Canada, use the power cord
provided with the monitor. If a power cord is not supplied with the
monitor, please contact your supplier.
21)
For all other cases, use a power cord that matches the AC voltage
of the power outlet and has been approved by and complies with
the safety standard of your particular country.
22)
time to avoid image persistence (after image effects).
23)
WARNING: Never expose the batteries to excessive
24)
ALWAYS plug the product into an outlet that is located in such a
manner that it can be easily unplugged in case the product
requires service.
25)
NEVER route the product’s power cord inside a wall or similar
enclosed area.
26)
void: a) the warranty, and b) the user’s authority to operate
this equipment under the rules of the Federal
Communications Commission.
27)
DANGER: RISK OF SERIOUS PERSONAL
INJURY, DEATH, OR EQUIPMENT DAMAGE!
Never place the monitor on an unstable
cart, stand, or table. The monitor may fall,
causing serious personal injury, death, or serious
damage to the monitor.
28)
When selecting a location for the monitor,
NEVER allow any part of the monitor to hang over the edge of
the supporting furniture,
NEVER place the monitor on tall furniture (for example,
entertainment centers or bookcases) without anchoring both the
furniture and the monitor to a suitable support,
Never place cloth or other material between the monitor and the
supporting furniture.
NEVER allow children to climb on the monitor.
29)
To avoid damage to this product, never place or store the monitor
in direct sunlight; hot, humid areas; or areas subject to excessive
dust or vibration.
30)
The product shall not be exposed to dripping or splashing, and
the apparatus.
31)
Never block or cover the slots or openings in the monitor cabinet
back, bottom, and sides. Never place the monitor:
on a bed, sofa, rug, or similar surface;
too close to drapes, curtains, or walls; or
other place with poor ventilation.
32)
Always leave a space of at least 10cm - 4 (four) inches around the
monitor. The slots and openings are provided to protect the
monitor from overheating and to help maintain reliable operation
of the monitor.
33)
Never allow anything to rest on or roll over the power cord, and
never place the monitor where the power cord is subject to wear or
abuse.
34)
Never overload wall outlets and extension cords.
Ergonomics
following:
35)
For optimum performance, allow 20 minutes for warm-up.
36)
Rest your eyes periodically by focusing on an object at least 5 feet
away. Blink often.
37)
Use the preset Size and Position controls with standard signals.
38)
Use the preset Color Setting.
39)
Use non-interlaced signals.
40)
Do not use primary color blue on a dark background, as it is
contrast.
41)
Adjust the monitor’s brightness, contrast, and sharpness controls
to enhance readability.
42)
Position the monitor at a 90° angle to windows and other light
Care
For better performance and safer operation of your TOSHIBA
monitor, follow these recommendations and precautions:
43)
Always unplug the monitor before cleaning. Gently wipe the
display panel surface (the monitor screen) using a dry, soft cloth
panel. Avoid contact with alcohol, thinner, benzene, acidic or
alkaline solvent cleaners, abrasive cleaners, or chemical cloths,
which may damage the surface. Never spray volatile compounds
such as insecticide on the cabinet. Such products may damage or
discolor the cabinet.
44)
Never hit, press, or place anything on the back cover. These
actions will damage internal parts.
45)
WARNING:
RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any kind into the
monitor cabinet slots.
46)
During a lightning storm, do not touch the connecting cables or
product.
47)
Always unplug the monitor to completely disconnect from main
power. When the monitor is turned off using the on/off switch, it is
not completely disconnected from power and a minute amount of
current is still consumed.
TD-X461M
iv
48)
During normal use, the monitor may make occasional snapping or
popping sounds. This is normal, especially when the unit is being
turned on or off. If these sounds become frequent or continuous,
unplug the power cord and contact a Toshiba Authorized Service
Provider.
49)
Handle with care when transporting. Save packaging for
transporting. Please clean the ventilation slots on the back of the
cabinet to remove dirt and dust at least once a year to maintain
reliable operation of the monitor.
50)
If using the cooling fan continuously, it’s recommended to clean
the ventilation slots at least once a month.
51)
When installing the remote control batteries;
Align the batteries according to the (+) and (-) indications inside
the case.
Service
52)
WARNING:
RISK OF ELECTRIC SHOCK!
Never attempt to service the monitor yourself. Opening and
removing the covers may expose you to dangerous voltage or
other hazards. Failure to follow this WARNING may result in
manual to a Toshiba Authorized Service Provider.
53)
If you have the monitor serviced:
Ask the service technician to use only replacement parts
Upon completion of service, ask the service technician to
perform routine safety checks to determine that the monitor is in
safe operating condition.
Important Information
Canadian Department of Communications Compliance
Statement.
country/region where the product is sold. In addition, the product
complies with the following:
DOC: This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety
Regulations according to CAN/CSA C22.2 No. 60950-1.
FCC Declaration of Conformity Compliance Statement (Part
15):
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in
a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
approved by the party responsible for compliance could void your
authority to operate the equipment.
LCD displays so as not to interfere with radio and television
reception.
1) Please use the supplied power cord to ensure FCC
compliance. If a power cord is not provided, please contact
your supplier.
2) Please use the supplied shielded video signal cable, 15-pin
mini D-SUB to 15-pin mini D-SUB.
EU conformity Statement
This product is labeled with the CE Mark in accordance
with the related European Directives, notably Low
Voltage Directive 2006/95/EC, Electromagnetic
Compatibility Directive 2004/108/EC and RoHS
Directive 2011/65/EU.
Responsible for CE-marking is TOSHIBA EUROPE
GMBH,
Hammfelddamm 8, 41460 Neuss, Germany
Warning
This is a Class A product. In a domestic environment this product may
cause radio interference, in which case the user may be required to take
adequate measures.
REACH Information
The European Union (EU) chemical regulation, REACH (Registration,
Evaluation, Authorization and Restriction of Chemicals), entered into
force on 1 June 2007, with phased deadlines to 2018. Toshiba will meet
all REACH requirements and is committed to provide our customers
with information about the presence in our articles of substances
included on the candidate list according to REACH regulation. Please
consult the following website www.toshiba.eu/reach for information
about the presence in our articles of substances included on the
candidate list according to REACH in a concentration above 0.1%
weight by weight.
TD-X461M
v
Disposal of your old product and batteries
Following information is only valid for EU meber states:
Disposal of products
The crossed out wheeled dust bin symbol indicates that
products must be collected and disposed of separately from
household waste. Integrated batteries and accumulators can
be disposed of with the product. They will be separated at
the recycling centres. The black bar indicates that the
product was placed on the market after August 13, 2005. By
participating in separate collection of products and
batteries, you will help to assure the proper disposal of
products and batteries and thus help to prevent potential
negative consequences for the
environment and human health. For more detailed
information about the collection and recycling programmes
available in your country, please contact your local city
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symbol indicates that
batteries and/or accumulators must be collected and
disposed of separately from household waste. If the battery
the Battery Directive (2006/66/EC), then the chemical
symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd)
will appear below the crossed out wheeled dust bin symbol.
By participating in separate collection of batteries, you will
help to assure the proper disposal of products and batteries
and thus help to prevent potential negative consequences
for the environment and human health. For more detailed
information about the collection and recycling programmes
available in your country, please contact your local city
Pb, Hg, Cd
ENERGY STAR
®
User Information
ENERGY STAR User Information Statement: the factory default
settings of this display meet ENERGY STAR
®
requirements. Changing
Picture Settings may increase energy consumption, possibly beyond the
ENERGY STAR
®
that earn the ENERGY STAR prevent green
house gas emissions by meeting strict
guidelines set by the U.S.
Environmental Protection Agency. ENERGY
STAR and the ENERGY STAR mark are
registered U.S. marks.
Important notes about your monitor
The following symptoms are technical limitations of LCD Display
technology and are not an indication of malfunction; therefore,
Toshiba is not responsible for perceived issues resulting from these
symptoms.
1)
moving image appears for a long period of time. The afterimage is
not permanent and will disappear in a short period of time.
2)
The LCD panel contained in this monitor is manufactured using
an extremely high level of precision technology; however, there
may be an occasional pixel (dot of light) that does not operate
properly (does not light, remains constantly lit, etc.). This is a
structural property of LCD technology, is not a sign of malfunction,
and is not covered under your warranty. Such pixels are not visible
when the picture is viewed from a normal viewing distance.
Note: Interactive video games that involve shooting a “gun” type
of joystick at an on-screen target may not work with this monitor.
WARNING: This product contains chemicals, including lead, known to
the State of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
Trademark Information
Windows is either a registered trademark or trademark of Microsoft
Corporation in the United States and/or other countries.
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
All other brand and product names are trademarks or registered
trademarks of their respective companies.
Copyright
Under the copyright laws, this guide cannot be reproduced in any form
without the prior written permission of Toshiba. No patent liability is
assumed, however, with respect to the use of the information contained
herein.
© 2015 by Toshiba Lifestyle Products & Services Corporation. All
rights reserved.
Notice
The information contained in this manual, including but not limited to
TOSHIBA LIFESTYLE PRODUCTS & SERVICES
CORPORATION (TOSHIBA) PROVIDES NO WARRANTY
WITH REGARD TO THIS MANUAL OR ANY OTHER
INFORMATION CONTAINED HEREIN AND HEREBY
EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR
PURPOSE WITH REGARD TO ANY OF THE FOREGOING.
TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES
INCURRED DIRECTLY OR INDIRECTLY FROM ANY
TECHNICAL OR TYPOGRAPHICAL ERRORS OR
OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES
BETWEEN THE PRODUCT AND THE MANUAL. IN NO
EVENT SHALL TOSHIBA BE LIABLE FOR ANY
INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR
EXEMPLARY DAMAGES, WHETHER BASED ON TORT,
CONTRACT OR OTHERWISE, ARISING OUT OF OR IN
CONNECTION WITH THIS MANUAL OR ANY OTHER
INFORMATION CONTAINED HEREIN OR THE USE
THEREOF.
TD-X461M
vi
Table Of Contents
4.2. OSD Menu Overview ........................................15
4.2.1. PICTURE menu ......................................15
4.2.2. SCREEN menu ........................................16
4.2.3. AUDIO menu ..........................................17
4.2.4. PIP menu ....................................................17
4.2.5. CONFIGURATION1 menu ............18
4.2.6. CONFIGURATION2 menu ............19
4.2.7. CONFIGURATION3 menu ............20
4.2.8. ADVANCED OPTION menu .......21
5. Input Mode ..............................................................23
6. Cleaning and Troubleshooting .............................24
6.1. Cleaning ......................................................................24
6.2. Troubleshooting ......................................................25
........................................26
1. Unpacking and Installation ..................................... 2
1.1. Unpacking .....................................................................2
1.2. Package Contents .....................................................2
1.3. Installation Notes ......................................................2
1.4. Installing and Removing Table Stands
(optional) .......................................................................3
1.5. Mounting on a Wall .................................................4
1.5.1. VESA Grid ....................................................4
1.6. Mounting in Portrait Position .............................5
1.7. Installing OPS device ...............................................5
1.8. Connect Power code .............................................6
1.9. Avoiding Image Retention ...................................6
2. Parts and Functions ................................................. 7
2.1. Control Panel ..............................................................7
2.2. Input/Output Terminals .........................................8
2.3. Remote Control ........................................................9
2.3.1. General functions .....................................9
2.3.2. ID Remote Control ..............................10
2.3.3. Inserting the batteries in the remote
control..........................................................11
2.3.4. Handling the remote control ..........11
2.3.5. Operating range of the remote
control..........................................................11
3. Connecting External Equipment ........................12
3.1. Connecting External Equipment ...................12
3.2. Connecting Multiple Displays in a Daisy-
..............................................12
3.2.1. Display control connection ..............13
3.2.2. Digital video connection ....................13
3.2.3. Analog video connection ..................13
3.3. IR connection ...........................................................14
3.4. IR Pass-through Connection ...........................14
4. OSD Menu ..............................................................15
4.1. Navigating the OSD Menu ...............................15
4.1.1. Navigating the OSD menu using the
remote control........................................15
4.1.2. Navigating the OSD menu using the
display’s control buttons ....................15
TD-X461M
1
Introduction
Safety Icons
This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment,
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not avoided, may result in property damage.
Provides important information.
About This Manual
This Installation/Operations Manual describes how to install, set up and operate the TD-X461M multi screen display..
TD-X461M
2
1. Unpacking and Installation
1.1. Unpacking
This product is packed in a carton, together with the standard accessories.
Any other optional accessories will be packed separately.
Due to the size and weight of this display it is recommended for two people to move it.
After opening the carton, ensure that the contents are complete and in good condition.
1.2. Package Contents
LCD display
Remote control with AAA batteries
Power cord (1.8 m)
VGA cable (1.8 m)
IR Extender Receiver(1.8m)
User manual
RS-232C Cable
* The supplied power cord varies depending on destination.
Power Cord
Video Signal Cable
(D-SUB to D-SUB Cable)
Remote Control
and AAA Batteries
User manual
IR Extender Receiver
RS-232C Cable
For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been
approved by and complies with the safety regulations of the particular country.
You might like to save the package box and packing material for shipping the display.
1.3. Installation Notes
Due to the high power consumption, always use the plug exclusively designed for this product. If an extended line is required, please consult your
service agent.
for proper ventilation. Avoid installing the product in the kitchen, bathroom or any other places with high humidity so as not to shorten the service life
of the electronic components.
The product can normally operate only under 3000m in altitude. In installations at altitudes above 3000m, some abnormalities may be experienced.
TD-X461M
3
1.4. Installing and Removing Table Stands (optional)
To install table stands:
1. Ensure your display is powered off.
2.
3. Grab the carrying handles and place the display face-down on the protective sheet.
4. After inserting the stand in the guide block, tighten the screws on both sides of the display.
The longer side of the stand should face the front of the display.
Carrying handle
Thumbscrews
Table stand
Longer portions face to front
To remove table stands:
1. Power off the display.
2.
3. Grab the carrying handles and place the display face-down on the protective sheet.
4. Remove screws using a screwdriver and place them in a safe place for reuse.
TD-X461M
4
1.5. Mounting on a Wall
To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface
that complies with TUV-GS and/or UL1678 standard in North America.
Protective Sheet
VESA Grid
Table
Tabletop stand
1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the
screen face.
2. Ensure you have all accessories for mounting this display (wall mount, ceiling mount, table stand, etc).
3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to the equipment
or injury to the user or installer. Product warranty does not cover damage caused by improper installation.
4. For the wall-mounting kit, use M6 mounting screws (having a length 10 mm longer than the thickness of the mounting bracket) and tighten them
securely.
1.5.1. VESA Grid
TD-X461M
400(H) x 200(V) mm
200(H) x 200(V) mm
For wall or ceiling installation, we recommend installing the display with metal brackets which are commercially
available. For detailed installation instructions, refer to the guide received with the respective bracket.
To lessen the probability of injury and damage resulting from fall of the display in case of earthquake or other
natural disaster, be sure to consult the bracket manufacturer for installation location.
Ventilation Requirements for enclosure locating
To allow heat to disperse, leave space between surrounding objects as shown in the
diagram below.
100 mm 100 mm
100 mm
100 mm
TD-X461M
5
1.6. Mounting in Portrait Position
This display can be installed in portrait position.
1. Remove the table stand, if attached.
2. Rotate 90 degrees anticlockwise. Key board comes in the lower right position when facing the display at the back.
90
90
1.7. Installing OPS device
1. Remove the screws of handle, then remove the handle.
2. Remove the screws of OPS cover.
3. Install the OPS device.
4. Fix the OPS device by screws.
5. Fix the handle by screws.
Screws for Handle
Screws for OPS
OPS Cover
Handle
TD-X461M
6
1.8. Connect Power code
1.
2. Use AC socket near the display.
1.9. Avoiding Image Retention
Do not display static (non-moving) content on the display for long periods of time.
This may cause image “burn-in” or image retention, which is not covered under warranty.
Avoid Static Content
Display dynamic (moving) images whenever possible.
the display at preset times of the day.
Set Screen sever function
TD-X461M
7
2. Parts and Functions
2.1. Control Panel
9
MUTE INPUT MENU
1
2
3
4
5
6
7
8
1
POWER button
Use this button to turn the display on or put the display to standby.
2
MUTE button
Switch the audio mute ON/OFF.
3
INPUT button
Use this button to select the input source.
4
[ ] button
Increase the adjustment while OSD menu is on, or increase the
audio output level while OSD menu is off.
5
[ ] button
Decrease the adjustment while OSD menu is on, or decrease the
audio output level while OSD menu is off.
6
[ ] button
Move the highlight bar up to adjust the selected item while OSD
menu is on.
7
[ ] button
Move the highlight bar down to adjust the selected item while OSD
menu is on.
8
MENU button
Return to previous menu while OSD menu is on, or to activate the
OSD menu when OSD menu is off.
“Keyboard Control Lock Mode” This function
completely disables the access to all Keyboard
Control functions. To enable or disable the
keyboard control lock, press both [
] and [
] buttons and hold down continuously for more
than 3 (three) seconds.
9
Remote control sensor and power status indicator
Receives command signals from the remote control.
- Lights green when the display is turned on
- Lights red when the display is in standby mode
- Lights amber when the display enters APM mode
- When {SCHEDULE} is enabled, the light blinks green and red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned off
- Lights green when the display is on, but the OPS is off
- Lights blue when the display and the OPS are on
- Lights red when the display is in standby mode
- Lights amber when the display enters APM mode
- When {SCHEDULE} is enabled, the light blinks green and red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned off
TD-X461M
8
2.2. Input/Output Terminals
1
AC IN
AC power input from the wall outlet.
2
MAIN POWER SWITCH
Switch the main power on/off.
3
/
4
IR IN / IR OUT
Reserved for the wired connection of the IR control.
If an external IR receiver is connected to [IR
IN], there is no function on the display’s remote
sensor.
5
RS232C OUT:
RS232C network output for the loop-through function.
6
RS232C IN
RS232C network input for the loop-through function.
7
RJ-45
LAN control function for the use of remote control signal from
control center.
8
HDMI IN
HDMI video/audio input.
9
DisplayPort
DisplayPort video input.
10
DVI IN
DVI-D video input.
11
DVI OUT / VGA OUT
DVI or VGA video output.
12
VGA IN (D-Sub)
VGA video input.
13
VGA AUDIO IN
Audio input for VGA source (3.5mm stereo phone).
14
COMPONENT IN (BNC)
Component YPbPr video source input.
15
Y/CVBS
Video source input.
16
SPEAKER SWITCH
Internal speaker on/off switch.
17
AUDIO IN
Audio input from external AV device (RCA).
18
AUDIO OUT (RCA)
Audio output from the AUDIO IN jack to an external AV device.
19
SPEAKERS OUT
External speakers output.
20
OPS SLOT
Slot for installing the optional OPS module.
21
ANTI-THEFT LOCK
Used for security and theft prevention.
TD-X461M
9
2.3. Remote Control
2.3.1. General functions
1
12
11
13
14
15
16
17
18
19
20
21
22
2
3
4
5
6
7
8
10
9
1
[POWER] button
Press to switch on the display from standby mode. Press again to
turn it off and back into standby mode.
2
[SMART] button
Press to activate Smart Menu. Press [ ] or [ ] button to select
menu options. Press [SET
Standard
Highbright
sRGB
Cinema:
3
[PIP] (Picture In Picture) button
[ON/OFF
INPUT
[CHANGE
4
[CONTRAST] button
Press to activate Contrast Menu. Press [ ] or [ ] button to adjust
the value.Press [MENU
5
[DISPLAY] button
Press to turn on/off the information OSD displayed on the upper
right corner of the screen.
6
[ ] button
Press to move the selection left in OSD menu.
Press to decrease the value in OSD menu.
Press to move the sub-picture left in PIP mode.
7
[SET] button
Press to activate the setting inside the OSD menu.
8
[AUTO ADJUST] button
Press to run the Auto Adjust function.
This button is functional for VGA input only.
9
[USB MENU] button
Use for model with USB multimedia function not supported
10
[MUTE] button
Press to turn the mute function on/off.
11
[NORMAL / ID] button
Press to set the remote control ID when you want to use this
remote control on one of several different displays. .
12
[VIDEO SOURCE] button
Press to toggle Video Source Menu. Press [ ] or [ ] button to
select one of the video sources among Displayport, DVI-D,
VGA, HDMI, Component, Video, or Card OPS. Press [SET]
[AUDIO SOURCE] button
Press to toggle Audio Source Menu. Press [ ] or [ ] button
to select one of the audio sources among Displayport, HDMI,
Audio1, Audio2, or Card OPS. Press [SET
and exit.
13
Picture Format button
Press to switch screen aspect ratio.
FULL, NORMAL, CUSTOM, and REAL.
FULL, NORMAL, DYNAMIC, CUSTOM,
REAL.
14
[BRIGHTNESS] button
Press to toggle Brightness Menu. Press [ ] or [ ] button to adjust
the value.
15
[ ] button
Press to move the selection up in OSD menu.
Press to move the sub-picture up in PIP mode.
16
[MENU] button
Press to turn the OSD menu on/off.
17
[ ] button
Press to move the selection right in OSD menu.
Press to increase the value in OSD menu.
Press to move the sub-picture right in PIP mode.
18
[EXIT] button
Press to turn back to the previous OSD menu.
TD-X461M
10
19
[ ] button
Press to move the selection down in OSD menu.
Press to move the sub-picture down in PIP mode.
20
[VOL UP] button
Press to increase the audio output level.
21
[VOL DOWN] button
Press to decrease the audio output level.
22
[Number / ID SET / ENTER] button
Press to set the display ID
2.3.2. ID Remote Control
You can set the remote control ID when you want to use this remote
control on one of several different displays.
Press [ID] button. The red LED blinks twice.
1. Press [ID SET] button for more than 1 second to enter the ID
Mode. The red LED lights up.
Press the [ID SET] button again will exit the ID Mode. The red LED
turns off.
2. Press the digit numbers [0] ~ [9] to select the display you want to
control.
display No.11.
The numbers available are from [01] ~ [99].
3. Not pressing any button within 10 seconds will exit the ID Mode.
4. If you mistakaly press a button, wait 1 second after the red LED
lights off and then lights up again, then press the correct digits again.
5. Press [ENTER
then lights off.
Press [NORMAL] button. The green LED
blinks twice, indicating the display is in normal
operation.
It is necessary to set up the ID number for
each display before selecting its ID number.
TD-X461M
11
2.3.3. Inserting the batteries in the remote control
The remote control is powered by two 1.5V AAA batteries.
1. Press and then slide the cover to open it.
2. Align the batteries according to the (+) and (–) indications inside the
battery compartment.
3. Replace the cover.
Place “AAA” batteries matching the (+) and (–) signs on each battery to the (+) and (–) signs of the battery
compartment.
Do not mix battery types.
Do not combine new batteries with used ones. It causes shorter life or leakage of batteries.
Remove the dead batteries immediately to prevent them from liquid leaking in the battery compartment. Don’t
touch exposed battery acid, as it can damage your skin.
If you do not intend to use the remote control for a long period, remove the batteries.
2.3.4. Handling the remote control
Do not subject to strong shock.
Do not allow water or other liquid to splash the remote control. If the remote control gets wet, wipe it dry immediately.
Avoid exposure to heat and steam.
Other than to install the batteries, do not open the remote control.
2.3.5. Operating range of the remote control
Point the top of the remote control toward the display’s remote control sensor(back
side) when pressing a button.
Use the remote control within the range which is shown in the following table.
Operation Angle RC operational distance
The remote control may not function properly when the remote
control sensor on the display is under direct sunlight or strong
illumination, or when there is an obstacle in the path of signal
transmission.
H
V
θ
TD-X461M
12
3. Connecting External Equipment
The peripherals and cables shown are for example purposes only.
3.1. Connecting External Equipment
DVD / VCR / VCD
PC
STEREO AMPLIFIER
DisplayPort IN
DisplayPort Out
AUDIO OUT
AUDIO IN
COMPONENT OUT
(YPbPr)
HDMI IN DVI IN VGA IN
COMPONENT IN
AUDIO OUT
DVI OUT
VGA OUT
AUDIO OUT
AUDIO IN
HDMI OUT
AC IN
R
L
R
L
AUDIO IN
Y/CVBS IN
Y/CVBS OUT
3.2. Connecting Multiple Displays in a Daisy-chain Configuration
RS232C can control Monitor ID maximum 26.
TD-X461M
13
3.2.1. Display control connection
Connect the [RS232C OUT] connector of DISPLAY 1 to the [RS232C IN] connector of DISPLAY 2.
PC
DISPLAY 2DISPLAY 1
[RS-232C IN][RS-232C] [RS-232C OUT] [RS-232C IN]
3.2.2. Digital video connection
Connect the [DVI OUT / VGA OUT] connector of DISPLAY 1 to the [DVI IN] connector of DISPLAY 2.
Signal output from the OPS module installed in DISPLAY1 can be daisy-chained via DVI.
PC
[DVI IN][DVI] [DVI/VGA OUT] [DVI IN]
DISPLAY 2DISPLAY 1
3.2.3. Analog video connection
Connect the [DVI OUT / VGA OUT] connector of DISPLAY 1 to the [VGA IN] connector of DISPLAY 2.
PC
DISPLAY 2DISPLAY 1
[VGA IN][VGA] [DVI/VGA OUT] [VGA IN]
TD-X461M
14
3.3. IR connection
[IR IN]
External
IR Receiver
This display’s remote control sensor will stop working if the [IR IN] is connected.
3.4. IR Pass-through Connection
DVD / VCR / VCD
(DVD / VCR / VCD)
Remote Control
[IR OUT]
[IR IN]
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
