Decdeal Fingerprint Lock Electronic Cabinet Locks Biometric Keyless Box Furniture Drawer Smart Fingerprint Lock User manual
- Type
- User manual
User manual
(B-P-01-A)
Fingerprint registration
：
Press any finger for around 5 seconds and waiting for the blue light to flash
，
Release your finger and the blue indicator will be on ， then please start to
register fingerprint. If the green indicator is flashing one time means register
succeed.Release your finger and press another 5 times ，（ Please press one
more time if red indicator on during registration period ） . 5 times succeed
means fingerprint registration finished ，（ Register other fingerprints requires
administrator authentication. The first 3 registrated fingerprints are
administrator）
Fingerprint unlocks:
Use fingerprints that have been successfully entered. Flashing green light
indicates correct fingerprint identification
，
unlock .
（
If you press your finger
Flashing red
，
That means fingerprint recognition does not pass
，
Need to press
the fingerprint again
）
. Two seconds after unlocking, the blue light is on for one
second to automatically reset the lock mode.
Delete fingerprint operation:
Press your finger for 10 seconds
，
Waiting for the red light to flash
（
Blue light will
flash first
）
.Release your finger at this time
，
verify administrator fingerprint
（
The
first three fingerprints entered are administrators
），
after the verification is
passed, the green light is on for 1 second, indicating that all fingerprints are
successfully deleted.
Precautions:
1.In the process of use, the battery does not have electricity, can not unlock,
you can open the lock through the USB port, external power supply.
2. When the lock does not store fingerprints, any finger can be unlocked.
3. It is recommended to use it after it is fully charged.
-
1
-
2
