Steel Cabinet Installation Guide for N-
Series, S-Series and U-Series Cabinets
www.signamax.com
Parts Assembly List
N&S Series
(16U-22U)
U Series
(16U-42U)
N Series
(26U-47U)
S Series
(26U-47U)
W=600 W=800 W=600
W=600
W=600 W=800 W=600 W=800
M5x15 Phillips Countersunk 32 32 32 32 32 32 32 32
M5 X12 Torx External 6-lobe 24 24 20 20 28 44 24 40
M12X85 Adjastable Feet 44444444
Bottom Cover 11111111
Top Cover 11111111
Vertical Profi le 44444444
Side Support Rails 00002222
W=800 Adapter 00000404
19" Mounting Rails 44444444
Solid Side Panel 22222222
Solid Rear Panel 11001100
Front Door 11001100
Perforated Front&Rear Door 00220022
Rear Door Holder 22002200
Rear Door Fixer 22002200
Track Link Part 44444444
Note : Periodically check that all fasteners and components are securely tightened
If the Cabinet was purchased assembled, it is the owner’s responsibility, before insatalling any active
Component the Cabinet for the fi rst time, to make sure the Cabinet has been assembled and adjusted
exactly as written in this manual, and any “Special Instructions” supplied and to make sure all fasteners and
components are securely tightened.
Note: Images are only for simutaion. The images shown may not match your product’s color.
Introduction
This Owner’s Manual is made for several different cabinet
Some illustrations may vary slightly from the actual product
Follow instructions completely.
If the cabinet has any parts that are not described in this manual, look for separate “Special Instructions” that
are supplied with the cabinet.
Models may have different accessory items such as Perforated Front Door, Glass Door, Adapter etc.
Please read through this entire manual before beginning assembly or maintenance
Tools Needed
Phillips Screwdriver BitTorx Screwdriver Bit T25Drill Screwdriver
Note : Use the parts list included in this manual to verify that all parts are accounted for before assembly. If any
parts are missing, contact the retailer of this Cabinet for replacement parts
1| Steel Cabinet Installation Manual
www.Signamax.com
[email protected] | P. 1-800-446-2377
Assembling Adjustable feet on the Bottom Sheet
Assembling
Vertical Profiles
Please insert each
Vertical Profile as
shown picture.
2| Steel Cabinet Installation Manual
www.Signamax.com
[email protected] | P. 1-800-446-2377
Assembling
Vertical
Profiles
Fix Left and Right
Supporting Rails
with 4 M5 X12 Torx
External (6-lobe)
After inserting the Vertical
Profiles please fix it from
two side as shown on
the picture with M5x12
Phillips Countersunk
Do not over-tighten. This
will damage the bolt
Assembling
Side
Support
Rails
3| Steel Cabinet Installation Manual
www.Signamax.com
[email protected] | P. 1-800-446-2377
Assembling Top Cover
After inserting Top
Cover, please fix it
from two side as
shown on the picture
with M5x12 Phillips
Countersunk
4| Steel Cabinet Installation Manual
www.Signamax.com
[email protected] | P. 1-800-446-2377
Assembling
Rear Door
Fix the Rear Door
Holder M5 X12 Torx
External (6-lobe)
Fix the Rear Door
Fixer M5 X12 Torx
External (6-lobe)
5| Steel Cabinet Installation Manual
www.Signamax.com
[email protected] | P. 1-800-446-2377
Please first put lugs in hole which
is on the bottom frame as shown
on the picture
While you install
Rear Panel make
sure locks are
unlocked.
6| Steel Cabinet Installation Manual
www.Signamax.com
[email protected] | P. 1-800-446-2377
Assembling
19” Mounting
Rails for 600
width
Fix the Mounting Rails with
M5 X12 Torx External (6-
lobe) Mounting rails have to
be fixed from 3 point on
the cabinet
Fix the Mounting Rails to the Bottom Cover
with M5 X12 Torx External (6-lobe)
7| Steel Cabinet Installation Manual
www.Signamax.com
[email protected] | P. 1-800-446-2377
Assembling 19” Mounting
Rails for 800 width
Fix Adapters on Side
Support Rails for left and
right side each Adapter
has to be fi xed with M5
X12 Torx External (6-lobe)
Fix the Mounting Rails to the Top
Cover with M5 X12 Torx External
(6-lobe)
8| Steel Cabinet Installation Manual
www.Signamax.com
[email protected] | P. 1-800-446-2377
Assembling
Side Panels
Fix the 19” Mounting Rails
on the adapters from 3
points First one to the
Adapter Second one
Bottom Cover and Third
point to the Top Cover
While you install side panel
make sure locks are unlocked.
Please first put lugs in hole
which is on the bottom frame as
shown next page
9| Steel Cabinet Installation Manual
www.Signamax.com
[email protected] | P. 1-800-446-2377
Assembling Front Door
Pull it down when you fi x top side of the door
Insert washer set
between door and
bottom cover
10| Steel Cabinet Installation Manual
www.Signamax.com
[email protected] | P. 1-800-446-2377
w
ww.signamax.com
CONNECT WITH US
Signamax Corporate
999 NW 159th Dr, Miami, FL 33169 •
800.446.2377 / 305.944.7710
AUSTRALIA
8 Port Kembla Dr, Perth,
Bibra Lake, WA 6163
Australia
T: +61 89 202 800
E: AP[email protected]
INDIA
A-74 FIEE Complex, OKHLA
Indust. Park Phase II New
Delhi, 110020
India
T: +91 114 106 9843
MIDDLE EAST
No 3 Reviera Hotel, Baniyas Rd,
Deira, Dubai
United Arab Emirates T: +97 155
424 2722 E: [email protected]
SOUTH EAST ASIA 55
UBI Ave 1,
#02-10 UBI 55
Singapore, 408935 T:
+65 6925 5798 E:
CANADA
2-975 Bleams Rd, Kitchener,
Ontario Canada
N2E3Z5
T: +1 519 570 3911 E:
MALAYSIA
Suite 1.2, 1st Floor Bangunan THK
No.2A Jalan 243 Seksyen 51a
46100 Petaling Jaya, Selangor,
Malaysia T: +60 3-7873 7317 E:
SRI LANKA
49 Sri Jinarathana Rd Colombo 2,
Sri Lanka
T: +94 114 792 100 E:
UK
7-10 Chandos Street,
London, W1G 9DQ
United Kingdom
T: +44 20 358 22933
International Sales Offices:
/
