Poly QDX 6000 User manual

Type
User manual

This manual is also suitable for

4.0.0 | Dec. 2009 | 3725-30855-001
Polycom
®
QDX
6000 System
User Guide
© 2009 Polycom, Inc. All rights reserved.
Polycom, Inc.
4750 Willow Road
Pleasanton, CA 94588-2708
USA
No part of this document may be reproduced or transmitted in any form or by any means, electronic or
mechanical, for any purpose, without the express written permission of Polycom, Inc. Under the law,
reproducing includes translating into another language or format.
As between the parties, Polycom, Inc., retains title to and ownership of all proprietary rights with respect to the
software contained within its products. The software is protected by United States copyright laws and
international treaty provision. Therefore, you must treat the software like any other copyrighted material (e.g.,
a book or sound recording).
Every effort has been made to ensure that the information in this manual is accurate. Polycom, Inc., is not
responsible for printing or clerical errors. Information in this document is subject to change without notice.
Trademark Information
Polycom®, the Polycom “Triangles” logo, and the names and marks associated with Polycom’s products are
trademarks and/or service marks of Polycom, Inc., and are registered and/or common-law marks in the United
States and various other countries.
All other trademarks are the property of their respective owners.
Patent Information
The accompanying product is protected by one or more U.S. and foreign patents and/or pending patent
applications held by Polycom, Inc.
iii
About This Guide
This guide includes overview information that you may find helpful when
you’re just starting to learn about video conferencing or when you have
experience, but you need a quick refresher.
Polycom® QDX™ 6000 system can be customized to show only those options
used in your organization. Therefore, there may be options covered in this guide
that you cannot access on your system. To find out more about these options,
please talk to the administrator of your Polycom QDX 6000 system.
Administrator Guide for Polycom QDX 6000 System
iv
Contents
i
Contents
Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Calling and Answering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Answering a Video Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Placing a Video Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Calling by Entering a Name or Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Calling from the Recent Calls List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Calling from the Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Calling from the Sites or Speed Dial List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Calling from the Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Ending a Video Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Types of Video Calls You Can Make . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Participating in an Encrypted Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Controlling What You See . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Selecting and Adjusting a Camera or Other Video Source . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting and Using Camera Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Switching Between Full-Screen Video and the Home Screen . . . . . . . . . . . . . . . . . . . . . . . 8
Adjusting Screen Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Specifying, Showing and Turning Off the PIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Controlling What You Hear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Adjusting Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Muting the Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Enjoying Stereo Audio in Video Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Showing Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Showing Content with People+Content™ IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Showing Content from a Computer Connected Directly to the System . . . . . . . . . . . . . . 13
Showing Content from a Document Camera, VCR, or DVD Player . . . . . . . . . . . . . . . . . 13
Working with Directory Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Searching the Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adding, Editing, and Deleting Local Directory Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Grouping Directory Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Refreshing Entries from the Polycom Global Directory Server . . . . . . . . . . . . . . . . . . . . . 17
Working with Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Adding Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Deleting Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing the Way Calls Are Answered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Temporarily Refusing Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Answering Video Calls Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Muting Automatically Answered Video Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Logging In and Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Customizing Your Workspace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Allowing the Far Site to Control Your Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
User Guide for Polycom QDX 6000 Room System
ii
Displaying the Far Site’s Name When the Call Connects . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Hearing Audio Confirmation When You Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Adjusting for Room Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
User Guide for Polycom QDX 6000 Room System
© Polycom, Inc. 1
Using the Remote Control
You use the remote control to place calls, adjust the volume, navigate screens,
and select options.
Select a far-site camera or video source
Place a call
Adjust the camera;
Navigate through menus
Return to the Place a Call (home)
screen
Increase or decrease the sound you
hear from the far sites
Zoom the camera image in or out
Mute the sound you are sending to
the far sites
Turn automatic camera tracking on
or off
Select a camera or other video
source
Display the onscreen keyboard so
you can enter text
Delete letters or numbers
Start and stop sending content to
far sites
End a call
Open the directory to make a call or work
with an entry
Confirm your current selection; perform
functions on highlighted items
Confirm your current selection; perform
functions on highlighted items
Select a near-site camera or video source
Cycle through display layouts
Enter a dot in an IP address
Enter numbers or text; move the camera
to a stored position
Access the online help; see current
system status while in a call; access the
System screen
Store camera positions (when followed
by a number); delete all stored camera
positions
User Guide for Polycom QDX 6000 Room System
2 © Polycom, Inc.
Calling and Answering
Answering a Video Call
The Polycom QDX 6000 system can answer incoming calls in one of these
ways:
The system answers incoming calls automatically.
The system prompts you to answer calls manually.
To answer the call manually:
Press Call on the remote control.
To configure the system to answer calls automatically or manually:
1. Go to System > User Settings .
2. Scroll to Auto Answer Point-to-Point Video and set the value to:
—Yes - to answer calls automatically.
—No - to answer calls manually.
Placing a Video Call
You can use your system to place a video call in any of these ways:
Entering a name or number. To enter letters, press Keyboard on the
remote control.
Choosing a site from:
Recent Calls list
Contacts list
Sites or Speed Dial list
Directory
User Guide for Polycom QDX 6000 Room System
© Polycom, Inc. 3
Calling by Entering a Name or Number
To place a call by entering a name or number:
1. In the dialing field, enter the dialing information. Depending on the
capabilities of your system and the system you are calling, the dialing
information could look like one of these samples:
10.11.12.13 (IP address—include the dots)
2555 (E.164 extension for H.323 or SIP)
stereo.polycom.com (DNS name)
2. Enter any additional information needed for the call. The available
settings depend on the type of call and your system’s configuration. Not
all calls require these settings:
Call Quality – Specify the call rate or call type for this call. For most
calls, choose Auto to let the system determine the best quality for the
call.
—Extension – If you need to dial an extension (E.164 address), enter the
extension in the second entry field. If your system is not configured
with a second entry field, you can enter the extension when the
gateway prompts you. You can also specify characters in the dial
string as instructed by the system administrator.
3. Press Call on the remote control to place the call.
Call progress indicators appear on the screen to show that the call is in
progress. When the indicators turn green, the call is connected.
Calling from the Recent Calls List
You may be able to choose a number to call from a list of the sites you have
called recently. The Recent Calls screen provides details of all incoming and
outgoing calls, including the time of the calls.
To place a call from the Recent Calls screen:
1. Select Recent Calls.
2. Scroll to the entry you want to call.
3. Press Call to place the call.
To see more details about a call listed on the Recent Calls screen, highlight the call
and press Help on the remote control.
You can sort the list by pressing the number keys 1-9. Press Help and select
Help to view sorting options.
User Guide for Polycom QDX 6000 Room System
4 © Polycom, Inc.
Calling from the Contacts List
You may be able to see a list of Contacts on the Contacts home screen.
To place a call using the Contacts list:
1. Select the Contact you want to call.
2. Press Call to place the call.
Calling from the Sites or Speed Dial List
You may be able to access calling information for specific sites using the Speed
Dial or Sites list on the Place a Call screen.
To place a call using the Speed Dial or Sites list:
1. Select Speed Dial or Sites from the Place a Call screen, if necessary.
2. Find the entry you want to call.
3. Press Call to place the call.
Calling from the Directory
The directory is a list of sites stored locally on the Polycom QDX 6000 system.
If the system is registered with a global directory, the directory also includes
entries from the global directory.
To place a call from the directory:
1. Press Directory on the remote control.
2. Find the entry to call.
3. Press
Call to place the call.
Ending a Video Call
To hang up from a call:
1. Press Hang Up on the remote control.
2. If prompted, confirm that you want to disconnect from the far site(s).
If you don’t confirm that you want to hang up, the system disconnects the call
automatically after 60 seconds.
User Guide for Polycom QDX 6000 Room System
© Polycom, Inc. 5
Types of Video Calls You Can Make
Depending on your system configuration, you may be able to make calls using
H.323 or SIP.
The following table lists some possible call combinations.
Participating in an Encrypted Call
If encryption is enabled on the system, a padlock icon appears on the monitor
to indicate whether a call is encrypted or unencrypted.
From... You can call... By dialing...
LAN Networked and Public
Sites
SIP URI, E.164 address, DNS name, or
IP address.
Protected and Private
Sites
Typically, the far site's gateway number
then the number of the far-site system.
Consult with the far site about the best
method for placing the call.
ISDN Depending on the H.323 gatekeeper or
SIP server, the access code of the
near-site gateway, the speed code, and
the ISDN number of the far site. Contact
your system administrator for more
information.
When you call an IP system through a gateway that requires an extension (E.164
address), enter the extension in the dialing field whenever possible. Check with
your network administrator for the extension delimiter you will need to enter into the
dialing field. For example, some networks use ## to separate the extension from
the IP address.
When you include the extension, you will be given the option of saving both the
number and the extension in the directory when the call ends. If you enter the
extension after the gateway connects, you can save only the gateway number when
the call ends.
User Guide for Polycom QDX 6000 Room System
6 © Polycom, Inc.
Controlling What You See
Selecting and Adjusting a Camera or Other Video Source
You can use the remote control to select the main camera or any other near-site
or far-site video sources, such as document cameras, computers, VCRs, or
DVD players. You are able to adjust the main camera or far-site camera that
supports pan, tilt, and zoom movement.
To select a near-site or far-site camera, or other video source:
1. If you are in a call, press Near or Far on the remote control to
select either near-site or far-site control.
2. Press Camera on the remote control. Then select the camera or other
video source you want to use.
To adjust a camera using the remote control:
1. Press Near or Far to select either near-site or far-site control.
2. Press the arrow buttons on the remote control to move the camera up,
down, left, or right.
3. Press Zoom on the remote control to zoom out or in.
You can adjust the far-site camera only if it is configured to allow you to control it.
This onscreen icon indicates that you can control a
near-site camera or video source.
This onscreen icon indicates that you can control a
far-site camera or video source.
User Guide for Polycom QDX 6000 Room System
© Polycom, Inc. 7
Setting and Using Camera Presets
Camera presets are stored camera positions that you can create ahead of time
or during a call.
Presets allow you to:
Automatically point a camera at pre-defined locations in a room.
Select a video source such as a VCR or DVD player, a document camera,
or an auxiliary camera.
If your system’s camera supports electronic pan, tilt, and zoom movement,
you can create up to 100 preset camera positions (0-99) for the near site. Each
preset stores the camera number, its zoom level, and the direction it points (if
appropriate). They remain in effect until you delete or change them.
If far-site camera control is allowed, you can create up to 16 presets (0-15) for
the far-site camera. These presets are saved only for the duration of the call.
You may also be able to use presets that were created at the far site to control
the far-site camera.
To move the camera to a preset:
1. If a call is connected, press Near or Far, and then choose a
near-site or far-site camera.
2. Press a number on the remote control.
To view your near-site presets:
Press Preset on the remote control.
Icons for presets 0-9 are shown on the screen. The colored icons indicate
stored camera positions, and the gray icons indicate unassigned presets.
To store a preset:
1. If you are in a call, press Near or Far, and then choose a near-site
or far-site camera or other video source.
2. If you selected a camera that supports electronic pan, tilt, and zoom, you
can adjust the camera’s position:
Press the arrow buttons on the remote control to move the camera up,
down, to the left, or to the right.
Press Zoom to zoom the camera out or in.
3. Press Preset on the remote control.
User Guide for Polycom QDX 6000 Room System
8 © Polycom, Inc.
4. Press and hold a number to store the preset position. To store a
double-digit preset, press the first digit quickly and hold the second
number down. Any existing preset stored at the number you enter is
replaced.
The system uses preset 0 as the default camera position.
To delete all presets:
1. If you are in a call, press Near, and then choose a near-site video
source.
2. Press Preset on the remote control.
3. Press and hold Delete to delete all presets.
Switching Between Full-Screen Video and the Home Screen
When the call connects, the system automatically shows video on the whole
screen. You can switch back to the home screen during a call if, for example,
you need to adjust a user setting, and your system is configured to allow you
to do so.
To see video in the full screen:
Press Near on the remote control.
To see the home screen:
Press Home on the remote control.
Adjusting Screen Layout
In calls, you can change the current screen layout on the monitor. What you
see during a call can depend on factors such as the system monitor
configuration, the number of sites in the call, whether the Picture-in-Picture
(PIP) is enabled and whether the content is being shared.
To change the screen layout:
In a call, repeatedly press PIP on the remote control to switch among
the screen layouts supported by the Polycom QDX 6000 system. These
might include the following layouts:
You cannot delete just one preset. Instead, overwrite an existing preset with the
new camera position.
User Guide for Polycom QDX 6000 Room System
© Polycom, Inc. 9
Specifying, Showing and Turning Off the PIP
Your system can be configured to display a Picture-in-Picture (PIP) window if
your monitor is set to an aspect ratio of 4:3. You can show the PIP any time the
system is not sending or receiving content.
To specify whether and when to display the PIP:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Select to see more settings
4. Scroll to PIP, and select one of these settings:
1. Far site, full screen
2. Far and near sites, the same size, side by side
3. Far site big, near site small (only available when
your monitor is configured to 16:9)
4. Far site displayed in full screen, and near site in
the right-bottom small window (PIP layout, only
available when your monitor is configured to 4:3)
5. Content displayed in the left big window, and far
and near sites in the right small window
User Guide for Polycom QDX 6000 Room System
10 © Polycom, Inc.
To show the PIP during a call:
Repeatedly press PIP on the remote control to scroll through the
available screen layouts. The PIP can change to show the near or far site.
Controlling What You Hear
Adjusting Volume
Use the remote control to raise or lower the volume of the sound you hear.
To adjust the volume:
Press Volume on the remote control.
Changing the volume affects only the sound you hear at your site.
Muting the Microphone
You can mute the microphone if you do not want the far site to hear you.
To mute or unmute the microphone:
Press Mute on the remote control.
If a Polycom microphone is connected to your system, you can also mute the
call by pressing
mute button on the microphone.
Select this setting... To set the PIP to
On Stay on for the duration of the call.
Auto Be shown when the user operates the
remote control and be turned off when the
user puts the remote control on the table
Off Be turned off during the call.
User Guide for Polycom QDX 6000 Room System
© Polycom, Inc. 11
Enjoying Stereo Audio in Video Calls
If your video conferencing room is configured to use stereo sound, the left and
right microphone inputs are configured during microphone connection.
Showing Content
You may be able to show the following to the far sites:
Any information stored on a computer
A paper document or object placed on a document camera
A videotape or DVD
You can show one type of content and one people video source at a time, and
you can switch to a different type of content or people video source if you need
to. Participants at other sites can also show content or people video sources.
Depending on how your system is configured, you may be able to show
content that is stored on a computer. When you show content from a
computer, the far site can see you and what you see on the computer screen.
When you are sending content, the content icon appears on your main
monitor. Depending on the configuration of your system, you may also see the
content on your monitor or projector.
Points to note about muting the microphone:
Muting the microphone does not mute audio coming from any device connected
to the VCR or content audio inputs.
In Security Mode, the microphone will automatically mute when the system is
asleep or is waiting for you to log in.
The microphone may automatically mute when the system automatically
answers an incoming call.
Stereo audio is only available in video calls of 256 kbps or higher.
User Guide for Polycom QDX 6000 Room System
12 © Polycom, Inc.
Showing Content with People+Content™ IP
People+Content™ IP allows you to send content from a computer that is not
connected directly to the Polycom QDX 6000 system.
To install People+Content IP on a computer:
1. On a computer with a Microsoft® Windows® XP, Windows 2000, or
Windows Vista operating system, open a web browser and go to the
Polycom web site at www.polycom.com/support.
2. Navigate to your product page.
3. Download and install the People+Content IP software.
To start showing content:
1. On the computer, start the Polycom People+Content IP application.
2. Enter the IP address or DNS host name of your video conferencing
system.
3. Click Connect.
4. Open the content you want to show, and do one of the following:
Click in People+Content IP.
Press Graphics on the video conferencing system's remote
control.
To stop showing content:
1. If the People+Content IP toolbar is minimized, maximize it by clicking
the icon in the task bar.
2. Do one of the following:
Click in People+Content IP.
Press Graphics on the video conferencing system's remote
control.
Points to note about People+Content IP:
People+Content IP provides video-only content. No audio is shared.
People+Content IP supports any computer desktop resolution with color set to
16-bit or higher.
People+Content must be enabled on the Polycom QDX 6000 system.
The People+Content IP application must be installed on a computer.
User Guide for Polycom QDX 6000 Room System
© Polycom, Inc. 13
Showing Content from a Computer Connected Directly to the System
Before you show content, check that the computer video is configured to use
one of these supported resolutions and refresh rates.
To start showing content:
1. Make sure the computer is powered on and connected to the VGA video
input of the Polycom QDX 6000 system.
2. Press Graphics on the remote control and select the computer input.
To stop showing content:
Press Graphics on the remote control and deselect the computer
input.
Showing Content from a Document Camera, VCR, or DVD Player
Depending on how your system is configured, you may be able to show
different types of information to other sites in a call, such as through a
document camera, VCR, or DVD player.
Before the call begins:
1. Make sure the document camera, VCR, or DVD player is connected and
powered on. Refer to the setup sheet that came with your system.
2. Position your document or object in the document camera or insert the
videotape or DVD.
To keep the call secure, content may be automatically stopped when a participant
joins the call.
Resolution Refresh rates (Hz)
800 x 600 60
1024 x 768 60
To set the resolution and refresh rate, go to your computer’s Display Control Panel.
User Guide for Polycom QDX 6000 Room System
14 © Polycom, Inc.
To start showing a document, object, videotape, or DVD in a call:
1. Press Graphics on the remote control.
2. Select a content source.
3. Press on the remote control.
To stop showing a document, object, videotape, or DVD in a call:
1. Press Graphics on the remote control.
2. Select the main camera.
3. Press on the remote control.
Working with Directory Entries
The directory on your Polycom QDX 6000 system stores dialing information
that helps you make calls quickly and easily. When a site listed in the directory
calls your system, the system displays the name on the screen when the call
comes in. If a site that calls you is not listed in the directory, you might be
prompted to save the contact information in the directory when the call ends.
If your system is registered with a Global Directory Service (GDS), your
directory contains two types of entries:
Local entries: Information about sites that you have added. These entries
are stored locally on your Polycom QDX 6000 system, and depending on
your system setup, you can remove or edit these entries. You can also
assign local entries to groups to make it easier to find numbers. Everyone
at your site who uses the system can use the entries you create, and you
can use the entries created by others. Users at other sites cannot access the
local entries on your system.
Global entries: Information about other active sites that are registered
with the same Global Directory Server. These entries are stored on the
Global Directory Server, and you cannot edit them. You can make a local
copy if you want to make changes.
Searching the Directory
You can find entries in the directory by:
Spelling the name using the number buttons on the remote control
Entering the name using the keyboard on the Directory screen or by
pressing
Keyboard on the remote control
Scrolling through the list of names using the Up and Down
arrow buttons
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Poly QDX 6000 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI