American Standard 2795204.020 Dimensions Guide

Brand: American Standard

Model: 2795204.020

Type: Dimensions Guide

American Standard 2795204.020 is a Right Height® Round Front Toilet with a concealed trapway and dual flush capabilities. It features a high-efficiency, low-consumption flush system that utilizes 21% less water compared to traditional toilets. The EverClean® surface inhibits the growth of bacteria, mold, and mildew, while the PowerWash® rim scrubs the bowl with each flush. The toilet also includes a slow-close seat with a concealed seat ring and easy lift-off feature for simple removal and reattachment for cleaning.

K2-3

spec_2795.204 Studio ConcealTrap DF RHrf w/seat Rev 6/19

Studio

Concealed Trapway Dual Flush

Right Height

Round Front Toilet With Seat

VITREOUS CHINA

Studio

Concealed Trapway Dual Flush

Right Height

Round Front Toilet With Seat

❑ 2795.204 Right Height

Round Front Bowl

• LXP (Luxury Performance) Toilet in 020 White

• Combination dual ush bowl and tank, with seat

• 12" (305mm) rough-in

• Siphon action jetted bowl with smooth-sided,

concealed trapway

• High efficiency, low consumption Full Flush

1.6gpf/6.0Lpf Conserving Flush 1.1 gpf/4.1Lpf,

utilizes 21% less water

• Meets EPA WaterSense

Criteria

• EverClean

surface inhibits the growth of stain-

and odor-causing bacteria, mold, and mildew on

the surface

• PowerWash

rim scrubs bowl with each ush

• 16-1/2" (419mm) rim height

• Fully-glazed 2-1/8" trapway

• Oversized 3" ush valve

• Generous 9" x 8" water surface area

• Includes slow close seat and cover with concealed

seat ring and easy lift-off feature for simple removal

and reattachment for cleaning

• Chrome-plated top mounted push button actuator

• 2 color matched bolt hole covers

• 5 year warranty on entire toilet

• Design coordinates with Studio

and

Boulevard

lavatories

❑ 3053.120 Right Height

Round Front bowl

Nominal Dimensions:

718 x 400 x 780mm (28-1/4" x 15-3/4" x 30-3/4")

Fixture only, seat and supply by others

❑ 4000.204 Tank, 1.1/1.6 gpf Dual Flush 12" rough-in

complete with coupling components and tank trim

❑ 5025B.65G Preferred Seat: Telescoping Round Front

Luxury Seat

Compliance Certications -

Meets or Exceeds the Following Specications:

• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous

China Fixtures

SEE REVERSE FOR ROUGHING-IN DIMENSIONS

EVERCLEAN® EPA

WATERSENSE®

CERTIFIED

WATER

EFFICIENT

K2-4

spec_2795.204 Studio ConcealTrap DF RHrf w/seat Rev 6/19

Studio

Concealed Trapway Dual Flush

Right Height

Round Front Toilet With Seat

VITREOUS CHINA

IMPORTANT: Water supply on the wall is required at 2-1/4" or 8" from centerline of the toilet (see rough-in).

First suggested position is hidden behind the toilet. The geometry of the toilet gives space for this installation.

The second suggested position is next to the toilet. Between these two positions, the space for the supply

between wall and toilet is limited to 4-1/2". In this case, check your supply and hose dimensions.

2-1/4"

(57mm)

28-1/4"

(717mm)

8-3/4"

(221mm)

1-1/8"

(29mm)

16-1/2"

(419mm)

4-1/2"

(114mm)

3-1/8"

(81mm)

2-5/8"

(67mm)

7-1/2"

(191mm)

12-7/8"

(328mm)

12-3/16"

(309mm)

16-1/2"

(419mm)

15-3/4"

(399mm)

30-7/8"

(784mm)

12"

(305mm)

FINISHED

FLOOR

FINISHED

WALL

C/L OF SEAT POST

HOLES 5-1/2"

(140mm) CENTERS

SUPPLY

REQUIRED

(position 1

position 2)

(152mm)

5-1/2"

(140mm)

14"

(356mm)

(204mm)

BACK VIEW

(for reference)

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

American Standard 2795204.020 Dimensions Guide

American Standard 2795204.020 Dimensions Guide

American Standard 2795204.020 Dimensions Guide

Related papers

Other documents