2. American Standard
  3. 721AA200S.020

American Standard 721AA200S.020 Dimensions Guide

  • Hello! I am an AI chatbot trained to assist you with the American Standard 721AA200S.020 Dimensions Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
LW-57
© 2017 AS America Inc.
spec_721AA.200S_CleanDFRHelCompl9/17
CLEAN
®
CONCEALED TRAPWAY DUAL FLUSH
RIGHT HEIGHT
®
ELONGATED COMPLETE TOILET
VITREOUS CHINA
SEEREVERSEFORROUGHING-INDIMENSIONS
CLEAN
®
CONCEALED TRAPWAY DUAL FLUSH
RIGHT HEIGHT
®
ELONGATED TOILET WITH SEAT
❑ 721AA.200S
•RightHeight
®
ElongatedCompleteToilet
•Easy Installation.Everythingneededfortoilet
installationisincludedandcanbehandtightened
•12"(305mm)rough-in
•Siphonactionjettedbowlwithsmooth-sided,
concealedtrapway
•Highefficiency,lowconsumptionFullFlush
1.6gpf/6.0LpfConservingFlush1.1gpf/4.1Lpf,
utilizes21%lesswater
•Meets EPA WaterSense
®
Criteria
•ToiletstayscleanerlongerwithEverClean
®
surface.
EverCleansurfaceinhibitsthegrowthofstain-
andodor-causingbacteria,mold,andmildewon
thesurface
•PowerWash
®
rimrinsesthebowlwithpressurized
waterwitheveryush
•16-1/2"(419mm)rimheight
•Fully-glazed2-1/8"trapway
•Oversized3"ushvalve
•Generous9"x8"watersurfacearea
•Includesslowcloseseatwitheasylift-offfeature
forsimpleremovalandreattachmentforcleaning
•Chrome-platedtopmountedpushbuttonactuator
•2colormatchedboltholecovers
•Warranty:LifetimeChinaware,10YearMechanical
Parts,1YearSeat
Nominal Dimensions:
30-1/4"x15-3/4"x30-3/4"
(769x400x780mm)
Supplybyothers
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08forVitreous
ChinaFixtures
EPA
WATERSENSE
CERTIFIED
EVERCLEAN
LW-58
© 2017 AS America Inc.
spec_721AA.200S_CleanDFRHelCompl8/17
CLEAN
®
CONCEALED TRAPWAY DUAL FLUSH
RIGHT HEIGHT
®
ELONGATED COMPLETE TOILET
VITREOUS CHINA
IMPORTANT: Water supply on the wall is required at 2-1/4" or 8" from centerline of the toilet (see rough-in).
First suggested position is hidden behind the toilet. The geometry of the toilet gives space for this installation.
The second suggested position is next to the toilet. Between these two positions, the space for the supply
between wall and toilet is limited to 4-1/2". In this case, check your supply and hose dimensions.
2-1/4"
(57mm)
30-1/4"
(768mm)
8-3/4"
(221mm)
1-1/8"
(29mm)
18-1/2"
(470mm)
4-1/2"
(114mm)
3-1/8"
(81mm)
2-5/8"
(67mm)
7-1/2"
(191mm)
13-11/16"
(347mm)
12-3/16"
(309mm)
16-1/2"
(419mm)
15-3/4"
(399mm)
30-7/8"
(784mm)
12"
(305mm)
FINISHED
FLOOR
FINISHED
WALL
C/L OF SEAT POST
HOLES 5-1/2"
(140mm) CENTERS
SUPPLY
AS
REQUIRED
(position 1 or
position 2)
6"
(152mm)
5-1/2"
(140mm)
14"
(356mm)
8"
(204mm)
BACK VIEW
(for reference)
NOTES:
THISTOILETISDESIGNEDTOROUGH-INATAMINIMUMDIMENSIONOF305MM(12")FROMFINISHEDWALLTOC/LOFOUTLET.
SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBEORDEREDSEPARATELY.
*
DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.
IMPORTANT:DimensionsofxturesarenominalandmayvarywithintherangeoftolerancesestablishedbyANSIStandardA112.19.2.
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibilityisassumedforuseofsupersededorvoidedpages.
/