Page is loading ...
K101
Revised 2/08
© 2008 AS America Inc.
❑
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 305mm (12") rough-in
• Round front bowl
• Close-coupled tank
• Color matched trip lever
• 2 bolt caps
• Includes color-matched solid plastic seat
and cover
• Wax ring gasket with closet bolts
• 100% factory ush tested
693 x 505 x 752mm
(27-5/16" x 19-7/8" x 29-5/8")
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS
SUPPLIED.
: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
305mm
(12)
693mm
(27-5/16)
C/L OF OUTLET
84mm
(3-5/16)
FINISHED WALL
232mm
(9-1/8)
17mm ± 6mm
(11/16 ±1/4)
383mm
(15-1/16)
425mm
(16-3/4)
C/L
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
308mm
(11-1/4)
159mm
(6-1/4)
16mm
(5/8)
FINISHED
FLOOR
752mm
(29-5/8)
232mm
(9-1/8)
152mm
(6)
505mm
(19-7/8)
*203mm
(8)
SUPPLY
AS
REQ'D
375mm
(14-3/4)
❏ Color: ❏ White ❏ Bone
❏ Supply with stop:
/