Stairmaster 8G 9-5270 Owner's manual

Hello! I am an AI chatbot trained to assist you with the Stairmaster 8G 9-5270 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

CORE HEALTH AND FITNESS

Page 1 of 2

620-8387 Rev: H

Treadmill LCD + 10” Embedded Console Install Wiring

Wiring from Neck of Unit:

Corrosponding Connections on Display Electronics:

LCD CONSOLE: SET CORRECT MODEL BY PRESSING 0+2+OK AT THE SAME TIME, USE ELEVATION UP TO

SELECT “MODEL” THEN USE THE SPEED UP TO SELECT CORRECT MODEL AND PRESS OK.

10” EMBEDDED: TAP CENTER OF SCREEN SO BLUE BOX APPEARS THEN IMMEDIATELY TAP UPPER LEFT

CORNER. CODE IS “218” SELECT MAINTENANCE MODE THEN SET MODEL TO APPROPRIATE MACHINE TYPE.

CORE HEALTH AND FITNESS

Page 2 of 2

620-8387 Rev: H

BCFG LCD + 10” Embedded Console Install Wiring

Wiring from Neck of Unit:

Corrosponding Connections on Display Electronics:

LCD CONSOLE: SET CORRECT MODEL BY PRESSING 0+2+OK AT THE SAME TIME, USE RESISTANCE UP TO

SELECT “MODEL”, PUSH OK, THEN USE THE RESISTANCE UP TO SELECT CORRECT MODEL AND PRESS OK.

10” EMBEDDED: TAP CENTER OF SCREEN SO BLUE BOX APPEARS THEN IMMEDIATELY TAP UPPER LEFT

CORNER. CODE IS “218” SELECT MAINTENANCE MODE THEN SET MODEL TO APPROPRIATE MACHINE TYPE.