2. Home
  3. Do-It-Yourself tools
  4. Garden tools
  5. Lawnmowers
  6. Toro
  7. Reelmaster 3100-D Traction Unit With Sidewinder

Toro Reelmaster 3100-D Traction Unit With Sidewinder User manual

  • Hello! I am an AI chatbot trained to assist you with the Toro Reelmaster 3100-D Traction Unit With Sidewinder User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3442-794RevA
Reelmaster
®
3100-DTractionUnit
ModelNo.03170—SerialNo.403430001andUp
ModelNo.03171—SerialNo.403430001andUp
Registeratwww.Toro.com.
OriginalInstructions(EN)
*3442-794*
ThisproductcomplieswithallrelevantEuropean
directives.Fordetails,pleaseseetheseparate
productspecicDeclarationofConformity(DOC)
sheet.
ItisaviolationofCaliforniaPublicResourceCode
Section4442or4443touseoroperatetheengineon
anyforest-covered,brush-covered,orgrass-covered
landunlesstheengineisequippedwithaspark
arrester,asdenedinSection4442,maintainedin
effectiveworkingorderortheengineisconstructed,
equipped,andmaintainedforthepreventionofre.
Theenclosedengineowner’smanualissupplied
forinformationregardingtheUSEnvironmental
ProtectionAgency(EPA)andtheCaliforniaEmission
ControlRegulationofemissionsystems,maintenance,
andwarranty.Replacementsmaybeorderedthrough
theenginemanufacturer.
WARNING
CALIFORNIA
Proposition65Warning
Dieselengineexhaustandsomeofits
constituentsareknowntotheStateof
Californiatocausecancer,birthdefects,
andotherreproductiveharm.
Batteryposts,terminals,andrelated
accessoriescontainleadandlead
compounds,chemicalsknownto
theStateofCaliforniatocause
cancerandreproductiveharm.Wash
handsafterhandling.
Useofthisproductmaycauseexposure
tochemicalsknowntotheStateof
Californiatocausecancer,birthdefects,
orotherreproductiveharm.
Introduction
Thismachineisaride-on,reel-bladelawnmower
intendedtobeusedbyprofessional,hiredoperators
incommercialapplications.Itisprimarilydesigned
forcuttinggrassonwell-maintainedturf.Usingthis
productforpurposesotherthanitsintendedusecould
provedangeroustoyouandbystanders.
Readthisinformationcarefullytolearnhowtooperate
andmaintainyourproductproperlyandtoavoid
injuryandproductdamage.Youareresponsiblefor
operatingtheproductproperlyandsafely.
Visitwww.T oro.comformoreinformation,including
safetytips,trainingmaterials,accessoryinformation,
helpndingadealer,ortoregisteryourproduct.
Wheneveryouneedservice,genuineToroparts,or
additionalinformation,contactanAuthorizedService
DealerorT oroCustomerServiceandhavethemodel
andserialnumbersofyourproductready.Figure1
identiesthelocationofthemodelandserialnumbers
ontheproduct.Writethenumbersinthespace
provided.
Important:Withyourmobiledevice,youcan
scantheQRcodeontheserialnumberplate(if
equipped)toaccesswarranty,parts,andother
productinformation.
g259773
Figure1
1.Modelandserialnumberlocation
ModelNo.
SerialNo.
Thismanualidentiespotentialhazardsandhas
safetymessagesidentiedbythesafety-alertsymbol
(Figure2),whichsignalsahazardthatmaycause
seriousinjuryordeathifyoudonotfollowthe
recommendedprecautions.
g000502
Figure2
Safety-alertsymbol
Thismanualuses2wordstohighlightinformation.
Importantcallsattentiontospecialmechanical
informationandNoteemphasizesgeneralinformation
worthyofspecialattention.
©2020—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
2
Contactusatwww.Toro.com.
PrintedintheUSA
AllRightsReserved
Contents
Safety.......................................................................4
GeneralSafety...................................................4
SafetyandInstructionalDecals..........................4
Setup.......................................................................11
1InstallingtheWheels......................................12
2InstallingtheSteeringWheel..........................12
3ChargingandConnectingtheBattery.............13
4CheckingtheAngleIndicator.........................14
5AdjustingTireAirPressure.............................14
6InstallingtheHoodLatch(CEOnly)................14
7InstallingtheExhaustGuard(CE
Only).............................................................16
8InstallingtheRollBar.....................................16
9InstallingtheFrontLiftArms...........................17
10InstallingtheCarrierFramestothe
CuttingUnits.................................................18
11MountingtheCuttingUnits...........................19
12MountingtheCuttingUnitDrive
Motors...........................................................20
13AdjustingtheLiftArms.................................21
14InstallingtheTipperRollerKit
(Optional)......................................................22
15ApplyingtheCEDecals...............................22
ProductOverview...................................................23
Controls...........................................................23
Specications..................................................25
Attachments/Accessories.................................25
BeforeOperation.................................................26
BeforeOperationSafety...................................26
PerformingDailyMaintenance..........................26
CheckingtheInterlockSystem..........................26
FillingtheFuelTank..........................................26
DuringOperation.................................................27
DuringOperationSafety...................................27
StartingtheEngine...........................................28
ShuttingOfftheEngine.....................................29
BleedingtheFuelSystem.................................29
CuttingGrasswiththeMachine........................29
ClipRate(ReelSpeed).....................................30
AdjustingReelSpeed.......................................31
OperatingTips.................................................31
AfterOperation....................................................32
AfterOperationSafety......................................32
AfterMowing....................................................32
IdentifyingtheTie-DownPoints........................32
HaulingtheMachine.........................................32
TowingtheMachine..........................................32
Maintenance...........................................................33
MaintenanceSafety..........................................33
RecommendedMaintenanceSchedule(s)...........33
DailyMaintenanceChecklist.............................35
Pre-MaintenanceProcedures..............................36
RemovingtheBatteryCover.............................36
OpeningtheHood............................................36
Lubrication..........................................................37
GreasingtheBearingsAndBushings................37
CheckingtheSealedBearings..........................39
EngineMaintenance...........................................40
EngineSafety...................................................40
ServicingtheAirCleaner..................................40
CheckingtheEngine-OilLevel..........................40
ChangingtheEngineOilandtheFilter..............41
FuelSystemMaintenance...................................42
ServicingtheFuelT ank.....................................42
InspectingtheFuelLinesand
Connections..................................................42
DrainingtheWaterSeparator...........................42
ChangingtheFuelFilterCanister......................43
BleedingAirfromtheInjectors..........................43
ElectricalSystemMaintenance...........................44
ElectricalSystemSafety...................................44
ServicingtheBattery.........................................44
ServicingtheFuses..........................................44
DriveSystemMaintenance..................................45
CheckingtheTirePressure...............................45
TorquingtheWheelNuts...................................45
AdjustingtheTractionDriveforNeutral.............45
CoolingSystemMaintenance..............................46
CoolingSystemSafety.....................................46
CheckingtheCoolingSystem...........................46
CleaningtheEngineCoolingSystem................46
BrakeMaintenance.............................................47
AdjustingtheParkingBrake..............................47
BeltMaintenance................................................48
ServicingtheEngineBelts................................48
ControlsSystemMaintenance.............................49
AdjustingtheThrottle........................................49
HydraulicSystemMaintenance...........................49
HydraulicSystemSafety...................................49
CheckingtheHydraulicLinesand
Hoses............................................................49
CheckingtheLeveloftheHydraulic
Fluid..............................................................49
HydraulicFluidSpecications...........................50
HydraulicFluidCapacity...................................50
ChangingtheHydraulicFluid............................50
ReplacingtheHydraulicFilter...........................51
CuttingUnitSystemMaintenance........................52
BladeSafety.....................................................52
CheckingtheReel-to-BedknifeContact............52
BacklappingtheCuttingUnits...........................52
Cleaning..............................................................54
WashingtheMachine.......................................54
Storage...................................................................54
StorageSafety..................................................54
PreparingtheTractionUnit...............................54
PreparingtheEngine........................................54
Troubleshooting......................................................56
UsingtheStandardControlModule
(SCM)...........................................................56
3
Safety
Thismachinehasbeendesignedinaccordance
withENISO5395(whenyoucompletethesetup
procedures)andANSIB71.4-2017.
GeneralSafety
Thisproductiscapableofamputatinghandsandfeet
andofthrowingobjects.
•Readandunderstandthecontentsofthis
Operator’sManualbeforestartingtheengine.
•Useyourfullattentionwhileoperatingthe
machine.Donotengageinanyactivitythat
causesdistractions;otherwise,injuryorproperty
damagemayoccur.
•Donotputyourhandsorfeetnearmoving
componentsofthemachine.
•Donotoperatethemachinewithoutallguards
andothersafetyprotectivedevicesinplaceand
functioningproperlyonthemachine.
•Keepbystandersandchildrenoutoftheoperating
area.Neverallowchildrentooperatethemachine.
•Shutofftheengine,removethekey,andwait
forallmovementtostopbeforeyouleavethe
operator’sposition.Allowthemachinetocool
beforeadjusting,servicing,cleaning,orstoringit.
Improperlyusingormaintainingthismachinecan
resultininjury.T oreducethepotentialforinjury,
complywiththesesafetyinstructionsandalways
payattentiontothesafety-alertsymbol
,which
meansCaution,Warning,orDanger—personalsafety
instruction.Failuretocomplywiththeseinstructions
mayresultinpersonalinjuryordeath.
SafetyandInstructionalDecals
Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyarea
ofpotentialdanger.Replaceanydecalthatisdamagedormissing.
decal93-6681
93-6681
1.Cutting/dismembermenthazard,fan—stayawayfrom
movingparts.
decal93-7276
93-7276
1.Explosionhazard—weareyeprotection.
2.Causticliquid/chemicalburnhazard—toperformrstaid,
ushwithwater.
3.Firehazard—nore,openames,orsmoking.
4.Poisonhazard—keepchildrenawayfromthebattery.
decal94-3353
94-3353
1.Crushinghazardofhand—keephandsaway.
99-3444
decal99-3444
99-3444
1.Transportspeed—fast
2.Mowingspeed—slow
4
decal106-9290
106-9290
1.Inputs5.Inseat
9.Outputs13.Engine—Start
2.Reels—active
6.PTO10.PTO
14.Power
3.Hightemperatureshutdown
7.Parkingbrake—Off11.Engine—Start
4.Hightemperaturewarning8.Neutral12.Engine—Run
decal117-3270
117-3270
1.Warning—donottouchthehotsurface.
2.Cutting/dismembermenthazard,hand;entanglement
hazard,belt—stayawayfrommovingparts,keepallguards
andshieldsinplace.
decal121-3598
121-3598
Note:Thismachinecomplieswiththeindustrystandard
stabilitytestinthestaticlateralandlongitudinaltestswiththe
maximumrecommendedslopeindicatedonthedecal.Reviewthe
instructionsforoperatingthemachineonslopesintheOperator’s
Manualaswellastheconditionsinwhichyouwouldoperatethe
machinetodeterminewhetheryoucanoperatethemachineinthe
conditionsonthatdayandatthatsite.Changesintheterraincan
resultinachangeinslopeoperationforthemachine.Ifpossible,
keepthecuttingunitsloweredtothegroundwhileoperatingthe
machineonslopes.Raisingthecuttingunitswhileoperatingon
slopescancausethemachinetobecomeunstable.
1.Tippinghazard—donotdriveacrossslopesgreaterthan
17°.
5
decal121-3628
121-3628
Note:Thismachinecomplieswiththeindustrystandard
stabilitytestinthestaticlateralandlongitudinaltestswiththe
maximumrecommendedslopeindicatedonthedecal.Reviewthe
instructionsforoperatingthemachineonslopesintheOperator’s
Manualaswellastheconditionsinwhichyouwouldoperatethe
machinetodeterminewhetheryoucanoperatethemachineinthe
conditionsonthatdayandatthatsite.Changesintheterraincan
resultinachangeinslopeoperationforthemachine.Ifpossible,
keepthecuttingunitsloweredtothegroundwhileoperatingthe
machineonslopes.Raisingthecuttingunitswhileoperatingon
slopescancausethemachinetobecomeunstable.
1.Tippinghazard—donotdriveacrossslopesgreaterthan
25°.
decal133-8062
133-8062
decal140-7461
140-7461
1.Crushinghazardofhands—stayawayfrommovingparts;
readtheOperator’sManual.
decalbatterysymbols
BatterySymbols
Someorallofthesesymbolsareonyourbattery.
1.Explosionhazard6.Keepbystandersaway
fromthebattery.
2.Nore,opename,or
smoking
7.Weareyeprotection;
explosivegasescan
causeblindnessandother
injuries.
3.Causticliquid/chemical
burnhazard
8.Batteryacidcancause
blindnessorsevereburns.
4.Weareyeprotection.9.Flusheyesimmediately
withwaterandgetmedical
helpfast.
5.ReadtheOperator's
Manual.
10.Containslead;donot
discard
6
decal121-3619
121-3619
1.PTO—Disengage6.Engine—Shutoff
2.PTO—Engage
7.Engine—Run
3.Lowerthecuttingunits.
8.Engine—Start
4.Raisethecuttingunits.
9.Fast
5.Lock
10.Slow
7
decal121-3620
121-3620
1.PTO—Disengage
7.Lock
2.PTO—Engage8.Engine—Shutoff
3.Movethecuttingunitsright.9.Engine—Run
4.Movethecuttingunitsleft.10.Engine—Start
5.Lowerthecuttingunits.
11.Fast
6.Raisethecuttingunits.
12.Slow
8
decal121-3623
121-3623
1.Warning—readtheOperator'sManual;donotoperatethe
machineunlessyouhavereceivedtraining.
5.Thrownobjecthazard—keepbystandersaway.
2.Warning—readtheOperator'sManualbeforetowingthe
machine.
6.Warning—wearhearingprotection.
3.Tippinghazard—slowthemachinebeforeturning;when
drivingonslopes,keepthecuttingunitsloweredandyour
seatbeltfastened.
7.Entanglementhazard—keepawayfrommovingparts;keep
allguardsandshieldsinplace.
4.Warning—donotparkonslopes;engagetheparkingbrake,
stopthecuttingunits,lowertheattachments,shutoffthe
engine,andremovethekeyfromtheignitionbeforeleaving
themachine.
9
decal138-6979
138-6979
1.ReadtheOperator'sManual.
10
Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Frontwheelassembly2
1
Rearwheelassembly1
Installthewheels.
Steeringwheel
1
Steering-wheelcap
1
Largewasher1
Jamnut1
2
Screw
1
Installthesteeringwheel.
3
Electrolyte
–
Activate,charge,andconnectthe
battery.
4
Inclinometer1
Checktheangleindicator.
5
Nopartsrequired
–
Adjustthetireairpressure.
Lockbracket1
Rivet2
Washer1
Screw(1/4x2inches)
1
6
Locknut(1/4inch)
1
Installthehoodlatch(CE).
Exhaustguard1
7
Self-tappingscrew
4
Installtheexhaustguard(CE).
Roll-barassembly1
Flange-headbolts4
Locknuts4
8
Hoseclamp1
Installtherollbar.
Liftarms
2
Pivotrod2
9
Bolt(5/16x7/8inch)
2
Installthefrontliftarms.(Partsare
suppliedintheLiftArmKit.)
10
Nopartsrequired
–
Installthecarrierframestothecutting
units.
11
Nopartsrequired
–
Mountthecuttingunits.
12
Nopartsrequired
–
Mountthecuttingunitdrivemotors.
13
Nopartsrequired
–
Adjusttheliftarms.
14
Tipperrollerkit(notincluded)
1Installtheoptionaltipperrollerkit.
Warningdecal(121-3598)
1
CEdecal
1
15
Productionyeardecal1
ApplytheCEdecals.
11
MediaandAdditionalParts
Description
Qty.
Use
Ignitionkey2
Starttheengine.
Operator'sManual
1
Engineoperator'smanual1
Readbeforeoperatingthemachine.
Operatortrainingmaterial
1
Viewbeforeoperatingthemachine.
Pre-deliverychecklist1
Checktoensurethatthemachinehasbeenproperlyset
up.
Certicateofcompliance
1
EnsureCEcompliance.
Note:Determinetheleftandrightsidesofthe
machinefromthenormaloperatingposition.
1
InstallingtheWheels
Partsneededforthisprocedure:
2Frontwheelassembly
1Rearwheelassembly
Procedure
Important:Therimandtireoftherearwheelis
narrowerthanthatofthefront2rimsandtires.
1.Mountawheelassemblyontothewheelhub
withthevalvestemalignedoutward.
2.Securethewheeltothehubwiththelugnuts,
andtorquethenutsinacrossingpatternto61
to88N∙m(45to65ft-lb).
3.Repeatsteps1and2fortheotherwheel
assemblies.
2
InstallingtheSteering
Wheel
Partsneededforthisprocedure:
1
Steeringwheel
1
Steering-wheelcap
1Largewasher
1Jamnut
1
Screw
Procedure
1.Slidethesteeringwheelontothesteeringshaft
(Figure3).
g010834
Figure3
1.Steeringwheel
3.Jamnut
2.Washer
4.Cap
2.Slidethewasherontothesteeringshaft(Figure
3).
12
3.Securethesteeringwheeltotheshaftwitha
jamnutandtightenitto27to35N∙m(20to26
ft-lb)(Figure3).
4.Installthecaptothesteeringwheelandsecure
itwithascrew(Figure3).
3
ChargingandConnecting
theBattery
Partsneededforthisprocedure:
–
Electrolyte
Procedure
DANGER
Batteryelectrolytecontainssulfuricacid,
whichislethalifconsumedandcauses
severeburns.
•Donotdrinkelectrolyteandavoidcontact
withskin,eyes,orclothing.Wearsafety
glassestoshieldyoureyesandrubber
glovestoprotectyourhands.
•Fillthebatterywherecleanwaterisalways
availableforushingtheskin.
1.Removethe2knobsthatsecurethebattery
covertothemachine,andremovethecover
(Figure4).
g336164
Figure4
1.Knob
2.Batterycover
2.Chargethebatteryatarateof3to4Afor4to
8hours.
WARNING
Chargingthebatteryproducesgasses
thatcanexplode.
•Keepsparksandamesawayfrom
battery.
•Neversmokenearthebattery.
3.Whenthebatteryischarged,disconnectthe
chargerfromtheelectricaloutletandbattery
posts.
4.Installthepositivecable(red)tothepositive(+)
batteryterminal,andsecurethemwithT-bolt
andnut(Figure5).
Note:Ensurethatthepositive(+)terminalisall
thewayontothepostandthecableispositioned
snugtothebattery.
Important:Thecablemustnotcontactthe
batterycover.
5.Installthenegativecable(black)tothenegative
(–)batteryterminalofthebattery,andsecure
themwithT-boltandnut(Figure5).
WARNING
Incorrectbatterycableroutingcould
damagethetractorandcablescausing
sparks.Sparkscancausethebattery
gassestoexplode,resultinginpersonal
injury.
•Alwaysdisconnectthenegative
(black)batterycablebefore
disconnectingthepositive(red)
cable.
•Alwaysconnectthepositive(red)
batterycablebeforeconnectingthe
negative(black)cable.
13
g011213
Figure5
1.Positive(+)batterycable2.Negative(–)batterycable
Important:Ifyoueverremovethebattery,
ensurethatthebatteryclampboltsare
installedwiththeboltheadspositionedon
thebottomsideandthenutsonthetopside.
Iftheclampboltsarereversed,theymay
interferewiththehydraulictubeswhenyou
shiftthecuttingunits.
6.CoatbothbatteryconnectionswithGrafo112X
skin-overgrease(ToroPartNo.505-47)orlight
greasetopreventcorrosion.
7.Slidetherubberbootoverthepositiveterminal
topreventapossibleshortfromoccurring.
8.Installthebatterycover.
4
CheckingtheAngle
Indicator
Partsneededforthisprocedure:
1Inclinometer
Procedure
1.Parkthemachineonaat,levelsurface.
2.Verifythatthemachineislevelbyplacing
ahandheldinclinometer(suppliedwiththe
machine)ontheframecrossrail,bythefuel
tank(Figure6).Theinclinometershouldread
zerodegreeswhenviewedfromtheoperator’s
position.
g008873
Figure6
1.Angleindicator
3.Iftheinclinometerdoesnotreadzerodegrees,
movethemachinetoalocationwhereazero
degreereadingisattained.Theangleindicator,
mountedonthemachine,shouldnowreadzero
degreesaswell.
4.Iftheangleindicatordoesnotreadzerodegrees,
loosenthe2screwsandnutssecuringtheangle
indicatortothemountingbracket,adjustthe
indicatortoattainazerodegreereading,and
tightenthebolts.
5
AdjustingTireAirPressure
NoPartsRequired
Procedure
Adjustthetireairpressureateachofthetires;referto
CheckingtheTirePressure(page45).
Note:Thetiresareover-inatedforshipping.
14
6
InstallingtheHoodLatch
(CEOnly)
Partsneededforthisprocedure:
1Lockbracket
2Rivet
1Washer
1
Screw(1/4x2inches)
1
Locknut(1/4inch)
Procedure
1.Unhookthehoodlatchfromthehood-latch
bracket.
2.Removetherivets(2)securingthehood-latch
brackettothehood(Figure7).Removethe
hood-latchbracketfromthehood.
g012628
Figure7
1.Hood-latchbracket2.Rivets
3.Whilealigningthemountingholes,positionthe
CElockbracketandthehood-latchbracketonto
thehood.Thelockbracketmustbeagainstthe
hood(Figure8).Donotremovetheboltandnut
assemblyfromthelockbracketarm.
g012629
Figure8
1.CElockbracket
2.Boltandnutassembly
4.Alignthewasherswiththeholesontheinsideof
thehood.
5.Rivetthebracketsandthewasherstothehood
(Figure8).
6.Hookthelatchontothehood-latchbracket
(Figure9).
g012630
Figure9
1.Hoodlatch
7.Screwtheboltintotheotherarmofhood-lock
brackettolockthelatchinposition(Figure10).
Note:Tightentheboltsecurelybutdonot
tightenthenut.
15
g012631
Figure10
1.Bolt
3.Armofhood-lockbracket
2.Nut
7
InstallingtheExhaust
Guard(CEOnly)
Partsneededforthisprocedure:
1Exhaustguard
4
Self-tappingscrew
Procedure
1.Positiontheexhaustguardaroundthemufer
whilealigningthemountingholeswiththeholes
intheframe(Figure11).
g008875
Figure11
1.Exhaustguard
2.Securetheexhaustguardtotheframewith4
self-tappingscrews(Figure11).
8
InstallingtheRollBar
Partsneededforthisprocedure:
1Roll-barassembly
4Flange-headbolts
4Locknuts
1Hoseclamp
Procedure
Important:Neverweldormodifyarollover
protectionsystem(ROPS).Replaceadamaged
ROPS;donotrepairorreviseit.
1.Lowertherollbarontothetractionunitmounting
brackets,aligningthemountingholes.Ensure
thattheventtubeontherollbarisontheleft
sideofthemachine(Figure12).
16
g011160
Figure12
1.Rollbar4.Fuellineventtubehose
2.Mountingbracket5.Hoseclamp
3.Venttube
2.Secureeachsideoftherollbartothemounting
bracketswith2angeheadboltsandlocknuts
(Figure12).T orquethefastenersto81N∙m(60
ft-lb).
3.Securethefuellineventhosetotheventtube
ontherollbarwiththehoseclamp.
CAUTION
Startingtheenginewiththefuellinevent
hosedisconnectedfromtheventtube
willcausefueltoowfromthehose,
increasingtheriskofreorexplosion.
Areorexplosionfromfuelcanburn
youandothersandcancauseproperty
damage.
Connectthefuellineventhosetothe
venttubepriortostartingtheengine.
9
InstallingtheFrontLift
Arms
Partsneededforthisprocedure:
2
Liftarms
2Pivotrod
2
Bolt(5/16x7/8inch)
Procedure
1.Removethe2boltsthatsecuretheliftarmpivot
shaftlinktotheliftarmpivotshafts,andremove
andretainthepivotshaftlinkandbolts(Figure
13).
g011161
Figure13
1.Liftarmpivotshaftlink2.Liftarmpivotshaft
2.Insertapivotrodintoeachliftarmandalignthe
mountingholes(Figure14).
g011162
Figure14
1.Liftarm
2.Pivotrod
3.Securethepivotrodstotheliftarmswith2bolts
(5/16x7/8inch).
4.Inserttheliftarmsontotheliftarmpivotshafts
(Figure15),andsecureeachwithaliftarmpivot
shaftlinkandboltspreviouslyremoved.
Note:T orquetheboltsto95N∙m(70ft-lb).
17
g011966
Figure15
1.Liftarm,right4.Liftcylinder
2.Retainingring
5.Spacers(2)
3.Liftarm,left
6.Mountingpin
5.Removetherearretainingringssecuringthe
mountingpinstoeachendoftheliftcylinder.
6.Securetherightendoftheliftcylindertothe
rightliftarmwithapinand2spacers(Figure
15).Secureitwitharetainingring.
7.Securetheleftendoftheliftcylindertotheleft
liftarmwithapin.Secureitwitharetainingring.
10
InstallingtheCarrier
FramestotheCuttingUnits
NoPartsRequired
Procedure
1.Removethecuttingunitsfromthecartons.
Adjustthemasdescribedinthecuttingunit
operator’smanual.
2.Positionafrontcarrierframe(Figure16)onto
eachfrontcuttingunit.
g011968
Figure16
1.Frontcarrierframe
3.Securethemountinglinkstothefrontcarrier
framesasfollows:
•Securethefrontmountinglinkstothemiddle
carrierframeholeswithabolt(3/8x2-1/4
inch),2atwashers,andalocknut,as
showninFigure17.Positionawasheron
eachsideofthelinkwhenmounting.Torque
thefastenersto42N∙m(31ft-lb).
•Securetherearmountinglinkstothemiddle
carrierframeholeswithabolt(3/8x2-1/4
inch),2atwashers,andalocknut,as
showninFigure17.Positionawasheron
eachsideofthelinkwhenmounting.Torque
thefastenersto42N∙m(31ft-lb).
g012688
Figure17
1.Frontcarrierframe
2.Frontmountinglink
3.Rearmountinglink
18
4.Positiontherearcarrierframe(Figure18)onto
therearcuttingunit.
g012003
Figure18
1.Rearcarrierframe
5.Securethemountinglinkstotherearcarrier
frameasfollows:
•Securethefrontmountinglinkstothecarrier
frameholeswithabolt(3/8x2-1/4inch),
2atwashers,andalocknut,asshownin
Figure19.Positionawasheroneachsideof
thelinkwhenmounting.T orquethefasteners
to42N∙m(31ft-lb).
•Securetherearmountinglinkstotherear
carrierframeholeswithabolt(3/8x2-1/4
inch),2atwashers,andalocknut,as
showninFigure19.Positionawasheron
eachsideofthelinkwhenmounting.Torque
thefastenersto42N∙m(31ft-lb).
g012689
Figure19
1.Rearcarrierframe
3.Rearmountinglink
2.Frontmountinglink
11
MountingtheCuttingUnits
NoPartsRequired
Procedure
1.Slideathrustwasherontoeachfrontliftarm
pivotrod.
2.Slidethecuttingunitcarrierframeontothepivot
rodandsecureitwithalynchpin(Figure20).
Note:Onrearcuttingunit,positionthethrust
washerbetweentherearofthecarrierframe
andthelynchpin.
g012016
Figure20
1.Thrustwasher3.Lynchpin
2.Carrierframe
19
3.Greasealltheliftarmandcarrierframepivot
points.
Important:Ensurethatthehosesarefree
oftwistsorsharpbendsandthattherear
cuttingunithosesareroutedasshowin
(Figure21).Raisethecuttingunitsandshift
themtotheleft(Model03171).Therear
cuttingunithosesmustnotcontacttraction
cablebracket.Repositionthettingsand/or
hoses,ifnecessary.
g011965
Figure21
4.Routeatipperchainupthroughtheslotonthe
endofeachcarrierframe.Securethetipper
chaintothetopofthecarrierframewithabolt,a
washer,andalocknut(Figure22).
g011218
Figure22
1.Tipperchain
12
MountingtheCuttingUnit
DriveMotors
NoPartsRequired
Procedure
1.Positionthecuttingunitsinfrontoftheliftarm
pivotrods.
2.RemovetheweightandO-ring(Figure23)from
theinsideendoftherightcuttingunit.
g011964
Figure23
1.O-ring
3.Mountingbolts
2.Weight
3.Removetheplugfromthebearinghousingon
theoutsideendoftherightcuttingunitand
installtheweightsandgasket.
4.Removetheshippingplugfromthebearing
housingsontheremainingcuttingunits.
5.InserttheO-ring(suppliedwiththecuttingunit)
ontheangeofthedrivemotor(Figure24).
20
/