2. EVOTECH
  3. PRN014778
PRN014778

EVOTECH PRN014778 User manual

  • Hello! I've reviewed the Installation Instructions document which details how to install bar ends using included M6 x 50mm caphead screws. The document also describes the steps of installation with a caution to ensure correct bar end location. I'm here to assist with any questions you have about installing these parts.
  • What does the kit include?
    What should I ensure during installation?
    What checks are recommended after installation?
    How many sides should be done?
Installation Instructions
Kit Contents PRN014778
2 x Bar Ends
A
2 x M6 x 50mm Caphead
B
Installation Instructions
1
Repeat
Both Sides
Installation Instructions
2
Repeat
Both Sides
Installation Instructions
3
Repeat
Both Sides
Installation Instructions
4
Repeat
Both Sides
Caution
Ensure The Bar End
Is Located Corretly
Installation Instructions
5
Repeat
Both Sides
Installation Instructions
6
Repeat
Both Sides
Installation Instructions
7
Repeat
Both Sides
Installation Instructions
It is recommended that periodic inspections are made to
ensure that all bolts are tightend to the specified torque settings.
Before riding the motorcycle ensure the throttle has adequate
clearance for rotation.
Plus has free play and doesn’t touch our product.
/