2D 2D
2D 2D
2E
2E 2E
2E
2
CAUTIONS
Do not install next to another light source as this may
cause light reflection.
When assembly is complete, check that all screws in the
unit are properly secured.
Do not hang from the wall mount bracket.
INSTALLATION
Drill holes and
attach wall anchor
plastic sheaths.
STEP 1
Attach the rubber
plate to the wall.
STEP 2
Rotate to take the
waterproof plate .
STEP 4
Use wall anchor to
affix support base
to wall.
STEP 3
Use the M3 screws
and nuts to affix
the mount plate of
dome camera to
the waterproof plate
of the bracket.
STEP 5
Let the wire along the
groove of the bracket
and go through the
coin slot or other three
slots.
Coin slot
STEP 6
Rotate the
waterproof plate,
and affix the anti-
tamper screw.
Dimension:237.5(L)*175(W)*126.4(H)mm
Weight: 1kg (2.2lb)
SPECIFICATION