DLA Plus 2.0

NOREGON DLA Plus 2.0 User guide

  • Hello! I've reviewed the Quickstart Guide for the Noregon DLA+ 2.0 Wireless Adapter. This document provides clear instructions on how to install the necessary drivers, connect the device via USB, and configure wireless connectivity and describes usage of diagnostic cable. I am ready to answer your specific questions about setting up and using this device.
  • How is the adapter powered?
    Where can I download adapter drivers?
    What should I do to connect the device using USB?
5
4
* Ensure that the USB cable is firmly
seated into the adapter’s USB port
DLA+2.0 WIRELESS |QUICKSTART GUIDE
Close running applications.
Users can download adapter drivers online by visiting: www.noregon.com/adapter-drivers and clicking the
“Instructions and Driver Download” button from the DLA+ 2.0 Wireless Adapter section of the adapter
driver landing page.
Once the download is complete, launch the installer and follow the prompts.
USB CONNECTION:
Plug the USB cable into the USB port on the PC.
Connect the other end of the USB cable to the port labeled Computer on the DLA+ 2.0 Wireless Adapter.
Connect the diagnostic cable to the 26-pin connector on the DLA+ 2.0 Wireless Adapter.
Attach the diagnostic cable’s connector to the diagnostic port on the vehicle.
WIRELESS CONFIGURATION: Refer to the DLA+ 2.0 Wireless Configuration section of the DLA+ 2.0 Adapter Family
User’s Manual for information on configuring the adapter for wireless connectivity. Find the User’s Guide by clicking on
the Windows Start button, then select All Programs Noregon DLA+ 2.0 Wireless Adapter and click the DLA+ 2.0
Adapter Family User’s Manual menu item.
1
2
3
4
5
6
7
INSTALL DRIVERS:
QSG-DLAW2.0-10-081822
QUESTIONS?
Call: (855) 889-5776
For driver updates & more, visit:
WWW.NOREGON.COM
7
Adapter is powered by the vehicle
and must be connected to operate.
NOTE:
6
/