2. Computers & electronics
  3. Computer cables
  4. Signal cables
  5. NOREGON
  6. DLA Plus 2.0
DLA Plus 2.0

NOREGON DLA Plus 2.0 User guide

  • Hello! I'm a chat assistant that has reviewed the Wired Adapter DLA+ 2.0 quickstart guide. I understand that this guide covers driver installation and how to connect the device to your PC and vehicle. The adapter is powered by vehicle connection. Feel free to ask any questions you have about the device or its setup process.
  • How is the adapter powered?
    Where can I download the adapter drivers?
    What connects to the 26-pin connector on the adapter?
DLA+2.0 |QUICKSTART GUIDE
5
7
*Ensure that the USB cable is firmly
seated into the adapter’s USB port
4
QSG-DLA2.0-09-081822
QUESTIONS?
Call: (855) 889-5776
For driver updates & more, visit:
WWW.NOREGON.COM
6
Close running applications.
Users can download adapter drivers online by visiting www.noregon.com/adapter-drivers and clicking the
“Instructions and Driver Download” button from the DLA+ 2.0 Wired Adapter section of the adapter
driver landing page.
Once the download is complete, launch the installer and follow the prompts.
CONNECT:
Plug the USB cable into the USB port on the PC.
Connect the other end of the USB cable to the port labeled Computer on the DLA+ 2.0 Wired Adapter.
Connect the diagnostic cable to the 26-pin connector on the DLA+ 2.0 Wired Adapter.
Attach the diagnostic cable’s connector to the diagnostic port on the vehicle.
1
2
3
4
5
6
7
INSTALL DRIVERS:
Adapter is powered by the vehicle
and must be connected to operate.
NOTE:
/